90W Vol konstantage PWM Output LED Driver

seri PWM-90

---

Manual pangguna

 

                   
(mung kanggo Tipe DA2) (mung kanggo Tipe DA)

       
Input AC: 100-240Vac
(mung kanggo DA2-Type)

(CCC opsional)

(kanggo 12, 24, 48, Mung Tipe Kosong)

           
(kanggo DA2 lan Tipe Kosong)

■ Fitur

• Pancet Voltage output gaya PWM
• Aplikasi lampu darurat kasedhiya miturut IEC61347-2-13
• Dibangun ing fungsi PFC aktif lan desain kelas II
• Unit daya kelas 2 (kajaba PWM-90-12)
• Ora ana konsumsi daya mbukak <0.5W
• Kanthi encapsulated karo tingkat IP67
• Fungsi: 3 in 1 dimming (dim-to-off); DALI/DALI-2
• Tingkat dimming minimal 0.2% kanggo jinis DALI
• Umur khas> 50000 jam lan garansi 5 taun

■ Aplikasi

• Lampu strip LED
• Lampu LED njero ruangan
• Lampu hias LED
• Lampu arsitektur LED
• Lampu industri

■ KODE GTIN

Panelusuran MW: https://www.meanwell.com/serviceGTIN.aspx

■ Deskripsi

PWM-90 seri punika 90W LED AC/DC driver LED nampilaken vol konstantage mode karo output gaya PWM, kang bisa kanggo njaga homogeneity padhange nalika nyopir kabeh jinis LED strips.PWM-90 makaryakke saka 90 ~ 305VAC lan nawakake model karo dirating vol beda.tage kiro-kiro antarane 12V lan 48V. Thanks kanggo efisiensi dhuwur nganti 90.5%, kanthi desain tanpa kipas, kabeh seri bisa digunakake kanggo -40 °C ~ +85 °C suhu kasus ing konveksi udara gratis. Seri kabeh dirating karo tingkat pangayoman ingress IP67 lan cocok kanggo bisa garing, damp utawa panggonan udan. PWM-90 dilengkapi fungsi dimming sing beda-beda siklus tugas saka output, nyediakake keluwesan gedhe kanggo aplikasi ngudani LED.

■ Model Encoding

1. Pilihan fungsi
2. Nilai output voltage (12/24/36/48V)
3. Dirating wattage
4. Jeneng seri

Jinis	Tingkat IP	Fungsi	Cathetan
kosong	IP67	3 in 1 fungsi dimming (0~10Vdc, 10V PWM sinyal lan resistance)	Ing Simpenan
DA	IP67	teknologi kontrol DALI (kanggo 12V/24V karo jinis DA mung)	Ing Simpenan
DA2	IP67	DALI-2 teknologi kontrol (kanggo 12V/24V/48V karo jinis DA2 mung)	Ing Simpenan

SPESIFIKASI

MODEL		PWM-90-12	PWM-90-24	PWM-90-36	PWM-90-48
OUTPUT	DC VOLTAGE	12V	24V	36V	48V
	RATED SAIKI	7.5A	3.75A	2.5A	1.88A
	DAYA RATED	90W	90W	90W	90.24W
	KANGGO DIMMING	0 ~ 100%
	PWM FREQUENCY (Jenis.)	1.47kHz kanggo Blank/Tipe DA, 2.5kHz kanggo Tipe DA2
	SETUP, RISE TIME Cathetan.2 Cathetan.9	500ms, 80ms / 115VAC utawa 230VAC
	WAKTU TAHAN (Typ.)	16ms / 115VAC utawa 230VAC
INPUT	VOLTAGE RANGE Cathetan.3	90 ~ 305VAC 127 ~ 431VDC (Waca bagean "KARAKTERISTIK STATIS")
	RANGKA FREKUENSI	47 ~ 63Hz
	FAKTOR DAYA (Jenis.)	PF> 0.98 / 115VAC, PF> 0.96 / 230VAC, PF> 0.92 / 277VAC @ beban kebak (Waca bagean "POWER FACTOR (PF) KARAKTERISTIK")
	TOTAL DISTORSI HARMONIS	THD< 20% (@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Mangga waca bagean "TOTAL HARMONIC DISTORTION")
	EFISIENSI (Typ.)	88%	90.5%	90.5%	90.5%
	AC ARUS (Typ.)	0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC
	INRUSH CURRENT (Jinis.)	COLD START 60A(twidth=550 μs diukur ing 50% Ipeak) ing 230VAC; Miturut NEMA 410
	MAX. NO. saka PSU ing 16A CIRCUIT BREAKER	3 unit (pemutus sirkuit tipe B) / 6 unit (pemutus sirkuit tipe C) ing 230VAC
	KEBOCORAN SAIKI	<0.25mA / 277VAC
	Ora ana konsumsi daya mbukak	<0.5W
pangayoman	kakehan	108 ~ 130% daya output dirating
		Mode Hiccup, pulih kanthi otomatis sawise kondisi fault dibusak
	CIRCUIT PENDEK	Mati o/p voltage, urip maneh kanggo mbalekake (kajaba kanggo DA2-jinis) mode Hiccup, pulih kanthi otomatis sawise kondisi fault dibusak (mung kanggo DA2-jinis)
	Liwat VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Mati o/p voltage, aktif maneh supaya pulih
	SUHU	Mati o/p voltage, aktif maneh supaya pulih
LINGKUNGAN	KERJA TEMP.	Tcase=-40 ~ +85 ℃ (Waca bagean "BEBAN OUTPUT vs SUHU")
	MAX TEMP KASUS.	Tcase = + 85
	AMBES KERJA	20 ~ 95% RH ora kondensasi
	SUHU PENYIMPANAN, Asor	-40 ~ + 80 ℃, 10 ~ 95% RH
	TEMP COEFFICIENT	± 0.03% / ℃ (0 ~ 50 ℃)
	GETERAN	10 ~ 500Hz, 5G 12min./1siklus, wektu kanggo 72min. saben sumbu X, Y, Z
KESELAMATAN & EMC	STANDAR KESELAMATAN Cathetan.5	UL8750 (kajaba DA-Type), CSA C22.2 No.. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independen, BS EN/EN62384, IP67, BIS IS15885(mung 12,24,48 Blank Type), EAC TP TC 004,GB19510.1, GB19510.14. 60335 disetujoni; Desain deleng BS EN/EN1-61347; Miturut BS EN/EN2-13-100 lampiran J cocok kanggo instalasi darurat(EL)(Input AC: 240-2Vac)(mung kanggo Tipe DAXNUMX)
	DALI STANDAR	IEC62386-101, 102, 207,251 mung kanggo Tipe DA/DA2, Tipe piranti 6(DT6)
	Tahan VOLTAGE	I / PO / P: 3.75KVAC; I/P-DA: 1.5KVAC; O/P-DA: 1.5KVAC
	RESISTANCE Isolasi	I/PO/P: 100M Ohm / 500VDC / 25 ℃ / 70% RH
	EMISI EMC Cathetan.6	Kepatuhan BS EN / EN55015, BS EN / EN61000-3-2 Kelas C (@ mbukak ≧ 60%); BS EN / EN61000-3-3, GB17743 lan GB17625.1, EAC TP TC 020
	KEMALANGAN EMC	Selaras karo BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, tingkat industri ringan (kekebalan lonjakan Line-Line 2KV), EAC TP TC 020
LAIN	MTBF	2394.5K jam min. Telcordia SR-332 (Bellcore); 224.2K jam min. MIL-HDBK-217F (25 ℃)
	DIMENSI	171 * 63 * 37.5mm (L * W * H)
	KEMASAN	0.77Kg; 18 pcs / 14.9Kg / 0.97CUFT
CATETAN	1. Kabeh paramèter sing ora disebutake khusus diukur ing input 230VAC, dirating saiki lan 25 ° C suhu sekitar. 2. De-rating bisa uga dibutuhake ing vol input kurangtages. Mangga deleng bagean "KARAKTERISTIK STATIS" kanggo rincian. 3. Dawane wektu nyetel diukur ing wiwitan kadhemen pisanan. Nguripake / mateni driver bisa nyebabake nambah wektu nyetel. 4. Driver dianggep minangka komponen sing bakal dilakokno ing kombinasi karo peralatan final. Amarga kinerja EMC bakal kena pengaruh instalasi lengkap, pabrikan peralatan pungkasan kudu nduweni kualifikasi maneh EMC Directive ing instalasi lengkap maneh. 5. Seri iki meets pangarep-arep urip khas saka> 50,000 jam operasi nalika Tcase, utamané (TC) titik (utawa TMP, saben DLC), iku bab 75 ° C utawa kurang. 6. Mangga deleng statement babar pisan ing MEAN WELL kang websitus ing http://www.meanwell.com 7. Penurunan suhu sekitar 3.5°C/1000m kanthi model tanpa kipas lan 5°C/1000m kanthi model penggemar kanggo ketinggian operasi sing luwih dhuwur tinimbang 2000m(6500ft). 8. Kanggo cathetan aplikasi lan IP banyu bukti instalasi ati-ati, mangga waca manual pangguna sadurunge nggunakake. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. Adhedhasar IEC 62386-101/102 DALI power on time and interruption regulations, set up time need to test with DALI controller which can support for DALI power on function, otherwise set up time will be higher than 0.5 second for Tipe DA. ※ Penafian Tanggung Jawab Produk: Kanggo informasi rinci, waca https://www.meanwell.com/serviceDisclaimer.aspx

■ DIMMING OPERASI

1. AC/L (Coklat)
2. AC/N (Biru)
3. DIM+(Ungu)*
4. DIM-(Pink)**
5. Vo+(Abang)
6. Vo-(Ireng)

* DIM + kanggo Blank-Type
DA + kanggo DA / DA2-jinis
* *DIM- kanggo Blank-Type
DA- kanggo DA / DA2-jinis
File Jeneng: PWM-90-SPEC 2022-11-28
CATETAN: DA / DA2-Type ora mbedakake antarane kutub "+" lan "-".

※ Prinsip redup kanggo output gaya PWM
• Dimming wis ngrambah dening werna-werna siklus tugas saka output saiki.

Output arus DC

Siklus tugas(%) = T ON/T ×100%

Frekuensi PWM output: 1.47kHz kanggo Blank/Tipe DA, 2.5kHz kanggo Tipe DA2

※ 3 in 1 fungsi dimming (kanggo Blank-Type)

• Gunakake salah siji saka telung metodologi antarane DIM + lan DIM-: 0 ~ 10VDC, utawa 10V PWM sinyal utawa resistance.
• Dimming sumber saiki saka sumber daya: 100μA (typ.)

◎ Aplikasi aditif 0 ~ 10VDC

1. Strip LED
2. Aditif Voltage
3. "Aja nyambung" DIM- menyang Vo-"
4. Siklus tugas arus output (%)
5. Dimming input: Aditif voltage

◎ Nerapake sinyal PWM 10V aditif (rentang frekuensi 100Hz ~ 3KHz):

1. Strip LED
2. Sinyal PWM aditif
3. "Aja nyambung" DIM- menyang Vo-"
4. Siklus tugas arus output (%)
5. Siklus tugas aditif 10V PWM sinyal dimming input

◎ Aplikasi resistance aditif:

1. Strip LED
2. Resistance aditif
3. "Aja nyambung" DIM- menyang Vo-"
4. Siklus tugas arus output (%)
5. (N = jumlah driver kanggo operasi dimming sing disinkronake) Input dimming: Resistance aditif

Cathetan:

1. Min. Siklus tugas saiki output kira-kira 0.15%, lan input dimming kira-kira 6KΩ utawa 0.6VDC, utawa sinyal 10V PWM kanthi siklus tugas 6%.
2. Siklus tugas arus output bisa mudhun nganti 0% nalika input dimming kurang saka 6KΩ utawa kurang saka 0.6VDC, utawa sinyal PWM 10V kanthi siklus tugas kurang saka 6%.

※ Antarmuka DALI (sisih utama; kanggo Tipe DA/DA2)

• Aplikasi sinyal DALI antarane DA + lan DA-.
• Protokol DALI kalebu 16 klompok lan 64 alamat.
• Langkah pisanan tetep ing 0.2% saka output

■ LOAD OUTPUT vs SUHU

BEBAN (%)    
SUHU UMUM,Ta (℃)

BEBAN (%)
Kasus (℃)

■ KARAKTERISTIK STATIS

BEBAN (%)
INPUT VOLTAGE (V) 60Hz

■ FAKTOR DAYA (PF) KARAKTERISTIK

※ Tcase ing 75 ℃

PF
MUNGKIN

※ De-rating dibutuhake ing volume input kurangtage.

■ DISTORSI HARMONIS TOTAL (THD)

Model Model 48V, Tcase ing 75 ℃

THD
MUNGKIN

■ EFISIENSI vs LOAD

Seri PWM-90 nduweni efisiensi kerja sing unggul nganti 90.5% bisa digayuh ing aplikasi lapangan.

Model Model 48V, Tcase ing 75 ℃

EFISIENSI(%)
MUNGKIN

■ URIP

UMUR (Kh)
Kase (℃)

■ Diagram Blok

Fosc PFC: 50 ~ 120KHz
Fosc PWM: 60 ~ 130KHz

1. EMI FILTER RECTIFIERS
2. SIRKUIT PFC
3. POWER SWITCHING
4. RECTIFIER & FILTER
5. SIRKUIT DIMMING
6. OLP
7. SIRKUIT DETEKSI
8. OVP
9. KONTROL PWM & PFC
10. OTP

■ Spesifikasi Mekanik

Nomer kasus PWM-90P Unit: mm

Blank-Tipe

• (tc): Maks. Suhu Kasus

1. AC/L (Coklat)
2. AC/N (Biru)
3. SJTW 18AWG×2C
4. UL2464 18AWG×2C
5. SJTW 16AWG×2C
6. DIM+(Ungu)*
7. DIM-(Pink)**
8. Vo+(Abang)
9. Vo-(Ireng)

Tipe DA/DA2

• (tc): Maks. Suhu Kasus

1. AC/L (Coklat)
2. AC/N (Biru)
3. SJOW 17AWG×2C&H05RN-F1.0mm2
4. UL2464 18AWG×2C
5. SJOW 17AWG×2C&H05RN-F1.0mm2
6. DA+(Ungu)*
7. DA-(Pink)**
8. Vo+(Abang)
9. Vo-(Ireng)

CATETAN: Tipe DA / DA2 ora ana bedane antarane kutub "+" lan "-".

■ Rekomendasi Arah Pemasangan

■ Manual Instalasi

◎ Sambungan kanggo Blank-jinis

1. AC/L (BROWN)
2. AC/N (BIRU)
3. DIM-(PINK)
4. DIM+(UNGGU)
5. -V (Ireng)
6. +V (Abang)
7. 0 ~ 10Vdc utawa 10V PWM
   utawa resistance Dimmer
   utawa DALI Dimmer
8. Strip LED

Ati-ati

• Sadurunge miwiti karya instalasi utawa pangopènan, mangga copot sumber daya saka sarana. Priksa manawa ora bisa disambungake maneh kanthi ora sengaja!
• Tansah ventilasi sing tepat ing sakubenge unit lan aja tumpukan obyek apa wae. Uga reresik 10-15 cm kudu disimpen nalika piranti jejer minangka sumber panas.
• Orientasi pemasangan liyane saka orientasi standar utawa beroperasi ing suhu sekitar sing dhuwur bisa nambah suhu komponen internal lan mbutuhake de-rating arus output.
• Rating saiki kabel primer / sekunder sing disetujoni kudu luwih gedhe utawa padha karo unit kasebut. Mangga deleng spesifikasi.
• Kanggo pembalap LED kanthi konektor anti banyu, priksa manawa sambungan antarane unit lan peralatan cahya kenceng supaya banyu ora bisa mlebu menyang sistem.
• Kanggo driver LED dimmable, priksa manawa pengontrol dimming sampeyan bisa nyopir unit kasebut. Seri PWM mbutuhake 0.15mA saben unit.
• Tc maks. diidentifikasi ing label produk. Mangga priksa manawa suhu titik Tc ora ngluwihi watesan.
• AJA nyambungake "DIM- menyang Vo-".
• Cocog kanggo panggunaan njero ruangan utawa ruangan ruangan tanpa sinar srengenge langsung. Mangga supaya kacemplungaken ing banyu liwat 30 menit.
• Sumber daya dianggep minangka komponen sing bakal dioperasikake kanthi kombinasi karo peralatan pungkasan. Amarga kinerja EMC bakal kena pengaruh instalasi lengkap, pabrikan peralatan pungkasan kudu nduweni kualifikasi maneh EMC Directive ing instalasi lengkap maneh.

File Jeneng: PWM-90-SPEC 2022-11-28

Diundhuh saka Arrow.com.

Dokumen / Sumber Daya

	MEAN WELL PWM-90 Series 90W Vol konstantage PWM Output LED Driver [pdf] Manual Pamilik PWM-90 Series 90W Vol konstantage PWM Output LED Driver, PWM-90 Series, 90W Konstan Voltage PWM Output LED Driver, Voltage Driver LED Output PWM, Driver LED Output PWM, Driver LED Output, Driver LED
	MEAN WELL PWM-90 Series 90W Vol konstantage PWM Output LED Driver [pdf] Manual Pamilik PWM-90 Series 90W Vol konstantage PWM Output LED Driver, PWM-90 Series, 90W Konstan Voltage PWM Output LED Driver, Konstan Voltage PWM Output LED Driver, Voltage Driver LED Output PWM, Driver LED Output PWM, Driver LED Output, Driver LED, Driver

Referensi

• Manual pangguna