PWM-120-12 Seri Konstan Voltage PWM Output LED Driver
“
Spesifikasi:
- Model: PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48
- DC Voltage: 12V, 24V, 36V, 48V
- Rated Saiki: 10A, 5A, 3.4A, 2.5A
- Daya Rated: 120W (kanggo kabeh model)
- Rentang Dimming: 0 – 100%
- Frekuensi PWM: 1.47kHz kanggo Blank/Tipe DA, 2.5kHz kanggo
Tipe DA2 - Setup, Rise Time: 500ms, 80ms
- Voltage Range: 90 – 305VAC, 127 – 431VDC
- Range Frekuensi: 47 – 63Hz
- Faktor Daya: PF>0.97/115VAC, PF>0.96/230VAC,
PF> 0.93/277VAC @ beban penuh - Distorsi Harmonik Total: THD<20%
- Efisiensi: 88.5% - 90%
- Maks. Jumlah PSU ing 16A Circuit Breaker: 4 unit (circuit
breaker saka tipe B) / 6 unit (circuit breaker saka tipe C) ing
230VAC
Pandhuan panggunaan produk:
1. Instalasi:
– Priksa manawa daya input cocog karo kisaran input AC sing ditemtokake
kanggo model sampeyan.
– Sambungake driver LED kanggo vol cocoktage sumber lan
njamin grounding sing tepat.
2. Dimming:
- Nyetel kisaran dimming saka 0 nganti 100% miturut cahya sampeyan
syarat.
– Gunakake setelan frekuensi PWM tartamtu kanggo optimal
kinerja.
3. Keamanan Listrik:
– Tindakake kabeh pedoman safety electrical cocog lan
peraturan nalika nginstal lan nggunakake driver LED.
– Aja ngluwihi jumlah maksimum PSU ing mbobol sirkuit
supaya ora overloading.
FAQ:
P: Apa sing kudu ditindakake yen driver LED ora urip?
A: Priksa sambungan daya input lan verifikasi yen voltage
sumber ana ing kisaran sing ditemtokake.
P: Apa aku bisa nyambungake sawetara LED menyang siji driver?
A: Apike kanggo tindakake pandhuan Produsèn ing
jumlah maksimum LED sing bisa disambungake menyang driver siji
kanggo njamin fungsi sing tepat lan umur dawa saka LED.
“`
120W Vol konstantage PWM Output LED Driver
seri PWM-120
Manual pangguna
2
(mung kanggo DA2-Type)
Input AC: 100-240Vac (mung kanggo Tipe DA2)
IP67
IS 15885
THOMAS SAMUEL
THOMAS SAMUEL
05
kajaba kanggo jinis 12DA
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
120W PWM Output LED Driver
seri PWM-120
SPESIFIKASI
MODEL
PWM-120-12
PWM-120-24
PWM-120-36
PWM-120-48
DC VOLTAGE
12V
24V
36V
RATED SAIKI
10A
5A
3.4A
DAYA RATED
120W
120W
122.4W
OUTPUT
KANGGO DIMMING
0 ~ 100%
FREKUENSI PWM (Tipe.) 1.47kHz kanggo Blank/Tipe DA, 2.5kHz kanggo Tipe DA2
SETUP, Munggah WAKTU
Cathetan.2 Cathetan.9
500ms, 80ms / 230VAC utawa 115VAC
WAKTU TAHAN (Typ.) 16ms/230VAC utawa 115VAC
VOLTAGE RANGE Cathetan.3
90 ~ 305VAC 127 ~ 431VDC (Waca bagean "KARAKTERISTIK STATIS")
RANGKA FREKUENSI 47 ~ 63Hz
FAKTOR DAYA (Jenis.)
PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ beban penuh (Mangga waca bagean "POWER FACTOR (PF) KARAKTERISTIK")
48V 2.5A 120W
TOTAL DISTORSI HARMONIS
THD< 20% (@load60%/115VAC, 230VAC; @load75%/277VAC) (Mangga deleng bagean "TOTAL HARMONIC DISTORTION")
INPUT
EFISIENSI (Typ.)
88.5%
90%
90%
AC ARUS (Typ.)
1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
INRUSH CURRENT (Typ.) COLD START 60A(twidth=520s diukur ing 50% Ipeak) ing 230VAC; Miturut NEMA 410
90.5%
MAX. NO. saka PSU ing 16A CIRCUIT BREAKER
4 unit (pemutus sirkuit tipe B) / 6 unit (pemutus sirkuit tipe C) ing 230VAC
KEBOCORAN SAIKI
<0.25mA / 277VAC
TANPA BEBAN / KONSUMSI DAYA SIAGA
Ora ana konsumsi daya mbukak <0.5w kanggo jinis kothong; konsumsi daya siyaga <0.5W kanggo jinis DA / jinis DA2
kakehan
108 ~ 130% daya output dirating mode Hiccup, pulih kanthi otomatis sawise kondisi fault dibusak
PERLINDUNGAN SHORT CIRCUIT
Liwat VOLTAGE
Mode hiccup 12V / 24V lan mode mati 36V / 48V (kalebu jinis DA / kajaba kanggo jinis DA2) Mode hiccup, pulih kanthi otomatis sawise kondisi fault dibusak (mung kanggo jinis DA2)
15 ~ 17V
28 ~ 34V
41 ~ 46V
54 ~ 60V
Mati o/p voltage, aktif maneh supaya pulih
SUHU LUWIH Mati o/p voltage, aktif maneh supaya pulih
KERJA TEMP.
Tcase=-40 ~ +90 (Waca bagean "BEBAN OUTPUT vs SUHU")
MAX TEMP KASUS.
Kasus = +90
LINGKUNGAN KERJA Alembab
20 ~ 95% RH ora kondensasi
SUHU PENYIMPANAN, lembab -40 ~ +80, 10 ~ 95% RH
TEMP COEFFICIENT
± 0.03%/ (0 ~ 45, kajaba 0 ~ 40 kanggo 12V)
GETERAN
10 ~ 500Hz, 5G 12min./1siklus, wektu kanggo 72min. saben sumbu X, Y, Z
UL8750 (jinis "HL") (kajaba jinis 12DA), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,
STANDAR KESELAMATAN
Cathetan.5
BS EN / EN62384 independen, IP67, BIS IS 15885 (Part2 / Sec13) (kanggo 12,24 Blank lan Tipe DA2), EAC TP TC 004, GB19510.1, GB19510.14 disetujoni; Desain deleng BS EN/EN60335-1; Miturut BS EN/EN61347-2-13
lampiran J cocok kanggo instalasi darurat(EL)(Input AC: 100-240Vac)(mung kanggo Tipe DA2)
DALI STANDAR
IEC62386-101, 102, 207,251 mung kanggo Tipe DA/DA2, Tipe piranti 6(DT6)
KESELAMATAN & NAHAN VOLTAGEI/PO/P:3.75KVAC; I/P-DA: 1.5KVAC; O/P-DA: 1.5KVAC
EMC
RESISTANCE Isolasi I/PO/P: 100M Ohm / 500VDC / 25/ 70% RH
EMC EMISSION Cathetan.6 EMC IMMUNITY
Selaras karo BS EN/EN55015, BS EN/EN61000-3-2 Kelas C (@load60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020
Selaras karo BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, tingkat industri ringan (kekebalan lonjakan Line-Line 2KV), EAC TP TC 020
LAIN MTBF DIMENSI
2243.7K jam min. Telcordia SR-332 (Bellcore); 191 * 63 * 37.5mm (L * W * H)
228.7K jam min. MIL-HDBK-217F (25)
KEMASAN
0.97Kg; 15 pcs / 15.6Kg / 0.87CUFT
1. Kabeh paramèter sing ora disebutake khusus diukur ing input 230VAC, dirating saiki lan 25 suhu sekitar.
CATETAN 2. De-rating bisa uga dibutuhake ing vol input kurangtages. Mangga deleng bagean "KARAKTERISTIK STATIS" kanggo rincian. 3. Dawane wektu nyetel diukur ing wiwitan kadhemen pisanan. Nguripake / mateni driver bisa nambah wektu nyetel.
4. Driver dianggep minangka komponen sing bakal dilakokno ing kombinasi karo peralatan final. Wiwit kinerja EMC bakal kena pengaruh
dening instalasi lengkap, manufaktur peralatan final kudu maneh kualifikasi EMC Directive ing instalasi lengkap maneh.
(minangka kasedhiya ing https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Seri iki meets pangarep-arep urip khas saka> 50,000 jam operasi nalika Tcase, utamané tc titik (utawa TMP, saben DLC), kira 75utawa kurang.
6. Mangga deleng statement babar pisan ing MEAN WELL kang websitus ing http://www.meanwell.com 7. Suhu sekitar derating 3.5/1000m karo model fanless lan 5/1000m karo model penggemar kanggo dhuwur operasi luwih saka 2000m (6500ft).
8. Kanggo cathetan aplikasi lan IP banyu bukti instalasi ati-ati, mangga waca manual pangguna sadurunge nggunakake.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
9. Adhedhasar IEC 62386-101/102 DALI power on time and interruption regulations, set up time need to test with DALI controller which can support for DALI power on function, otherwise set up time will be higher than 0.5 second for Tipe DA.
Penafian Tanggung Jawab Produk Kanggo informasi rinci, waca https://www.meanwell.com/serviceDisclaimer.aspx
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
120W PWM Output LED Driver
OPERASI DIMMING
seri PWM-120
AC/L(Coklat) AC/N(Biru)
PWM-120
Prinsip dimming kanggo output gaya PWM Dimming digayuh kanthi ngowahi siklus tugas saka arus output.
Output DC saiki ON
Io=0A
OFF TON
T
DIM+(Ungu)* DIM-(Pink)** +V(Abang)(Coklat kanggo tipe DA) -V(Ireng)(Biru kanggo tipe DA)
* DIM + kanggo Blank-Tipe DA + kanggo DA / DA2-jinis
* * DIM- kanggo Blank-Tipe DA- kanggo DA / DA2-jinis
TON
Siklus tugas (%) =
×100%
T
Frekuensi PWM Output: 1.47kHz kanggo Blank/Tipe DA 2.5kHz kanggo Tipe DA2
Fungsi dimming 3 in 1 (kanggo Blank-Type)
Gunakake salah siji saka telung metodologi antarane DIM + lan DIM-: 0 ~ 10VDC, utawa 10V PWM sinyal utawa resistance. Dimming sumber saiki saka sumber daya: 100A (typ.)
Aplikasi aditif 0 ~ 10VDC
+V +
Strip LED
-V DIM+
DIM-
–
+ Aditif Voltage
–
"Aja nyambung" DIM- to -V "
+ -
10%
0.15%
0.6V 1V
Siklus tugas arus output (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Aditif voltage
Nerapake sinyal aditif 10V PWM (rentang frekuensi 100Hz ~ 3KHz):
+V +
Strip LED
-V DIM+
DIM-
Sinyal PWM aditif
"Aja nyambung" DIM- to -V "
+ -
10% 0.15%
6% 10%
Siklus tugas arus output (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Siklus tugas aditif 10V PWM sinyal dimming input
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
120W PWM Output LED Driver
seri PWM-120
Aplikasi resistance aditif:
+V +
Strip LED
-V DIM+
DIM-
Resistance aditif
"Aja nyambung" DIM- to -V "
+ -
10% 0.15%
6K/N 10K/N
Siklus tugas arus output (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
0% Singkat
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=jumlah driver kanggo operasi peredupan sinkronisasi)
Dimming input: Resistance aditif
Cathetan: 1. Min. siklus tugas saiki output kira-kira 0.15%, lan input dimming kira-kira 6K utawa 0.6VDC, utawa 10V sinyal PWM karo 6% siklus tugas. 2. Siklus tugas saiki output bisa mudhun nganti 0% nalika input dimming kurang saka 6K utawa kurang saka 0.6VDC, utawa sinyal PWM 10V kanthi siklus tugas kurang saka 6%.
Antarmuka DALI (sisih utami; kanggo DA / DA2-Type) Aplikasi sinyal DALI antarane DA + lan DA-. Protokol DALI kalebu 16 klompok lan 64 alamat. Langkah pisanan tetep ing 0.2% saka output
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
BEBAN (%)
120W PWM Output LED Driver
BEBAN OUTPUT vs SUHU
seri PWM-120
100
80 230VAC Input mung
60 50 40
20
12V mung
-40 -25
0
15
30
40 45 50
60
SUHU AMBIENT,Ta ()
70 (HORIZONTAL)
BEBAN (%)
100
80 230VAC Input mung
60
40
20
-40 -25 0
20
45
65
75
85
90 (HORIZONTAL)
Kasus ()
CIRI STATIK
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz De-rating dibutuhake ing vol input kurangtage.
DISTORSI HARMONIS TOTAL (THD)
Model 48V, Tcase ing 80
30%
25%
20%
277VAC
15%
230VAC
115VAC
10%
5%
0%
50%
60%
70%
80%
90%
100%
MUNGKIN
EFISIENSI(%)
PF
FAKTOR DAYA (PF) KARAKTERISTIK
Kasus ing 80
1 .0 0 0 .9 5 0 .9 0 0 .8 5 0 .8 0 0 .7 5 0 .7 0 0 .6 5 0 .6 0 0 .5 5 0 .5 0 0 .4 5 0 . 4 0 0 .3 5 0 .3 0
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% (75W)
MUNGKIN
277V 230V 115V
EFISIENSI vs BEBAN
Seri PWM-120 nduweni efisiensi kerja sing unggul nganti 90.5% bisa digayuh ing aplikasi lapangan. Model 48V, Tcase ing 80
92 91 90 89 88 87 86 85 84 83 82 81 80
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V 230V 115V
MUNGKIN
THD BEBAN (%)
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
120W PWM Output LED Driver
seri PWM-120
UMUR
UMUR (Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Kasus()
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
120W PWM Output LED Driver
seri PWM-120
Diagram Blokir
Saringan EMI
Aku / P
&
RECTIFIER
SIRKUIT PFC
POWER SWITCHING
OTP
OLP
KONTROL PWM & PFC
RECTIFIER &
FILTER
Fosc PFC: 50 ~ 120KHz Fokus PWM: 60 ~ 130KHz
OLP
SIRKUIT DIMMING
SIRKUIT DETEKSI
+V -V DIM+ DIM-
OVP
Spesifikasi Mekanik
Blank-Tipe
Nomer kasus PWM-120
Unit: mm Toleransi: ± 1
300±20
AC/L(Coklat) AC/N(Biru)
50±3 SJTW 18AWG×2C
5
191 5
63 31.5
2-4.5
T kasus tc
95.5
5
tc: maks. Suhu Kasus
5
300±20
UL2464 18AWG×2C SJTW 14AWG×2C 50±3
DIM+(Ungu) DIM-(Pink) +V(Abang) -V(Ireng)
37.5
3
Tipe DA/DA2
300±20
AC/L(Coklat) AC/N(Biru)
50±3
SJOW 17AWG×2C &H05RN-F 1.0mm2
5
191 5
63 31.5
2-4.5
T kasus tc
95.5
5
tc: maks. Suhu Kasus
5
300±20 UL2464 18AWG×2C SJOW 17AWG×2C 50±3 &H05RN-F 1.0mm2
DA+(Ungu) DA-(Pink) +V(Coklat) -V(Biru)
37.5
3
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
120W PWM Output LED Driver
Rekomendasi Pitunjuk Pemasangan
Sambungan Manual Instalasi kanggo Blank-jinis
seri PWM-120
AC/L(COKLAT) AC/N(BIRU)
DIM-(P-INK) +
DIM+(UNGGU)
-V(Ireng) +
+V (Abang)
0 ~ 10Vdc utawa 10V PWM utawa resistance Dimmer utawa DALI Dimmer
Strip LED
Ati-ati Sadurunge miwiti karya instalasi utawa pangopènan, copot sumber daya saka sarana. Mesthekake
sing ora bisa disambungake maneh ora sengaja! Tansah ventilasi sing tepat ing saubengé unit lan aja tumpukan obyek apa wae. Uga reresik 10-15 cm kudu katahan nalika
piranti jejer minangka sumber panas. Orientasi soyo tambah liyane saka orientasi standar utawa operate ing suhu lingkungan dhuwur bisa nambah
suhu komponen internal lan bakal mbutuhake de-rating ing output saiki. Rating saiki kabel primer / sekunder sing disetujoni kudu luwih gedhe utawa padha karo unit kasebut. Mangga deleng
kanggo specification sawijining. Kanggo pembalap LED kanthi konektor anti banyu, priksa manawa ana hubungane antarane unit lan peralatan cahya
kenceng supaya banyu ora bisa mlebu menyang sistem. Kanggo driver LED dimmable, priksa manawa pengontrol dimming sampeyan bisa nyopir unit kasebut. Seri PWM
mbutuhake 0.15mA saben unit. Tc maks. diidentifikasi ing label produk. Mangga priksa manawa suhu titik Tc ora ngluwihi watesan. AJA nyambung "DIM- kanggo -V". Cocog kanggo panggunaan njero ruangan utawa ruangan ruangan tanpa sinar srengenge langsung. Aja nyemplung ing banyu luwih saka 30
menit. Sumber daya dianggep minangka komponen sing bakal dioperasikake kanthi kombinasi karo peralatan pungkasan. Wiwit EMC
kinerja bakal kena pengaruh dening instalasi lengkap, manufaktur peralatan final kudu maneh kualifikasi EMC Directive ing instalasi lengkap maneh.
Diundhuh saka Arrow.com.
File Jeneng: PWM-120-SPEC 2024-09-25
Dokumen / Sumber Daya
 |
MEAN-WELL PWM-120-12 Seri Konstan Voltage PWM Output LED Driver [pdf] Manual Pamilik PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, PWM-120-12 Seri Konstan Voltage PWM Output LED Driver, PWM-120-12 Series, Konstan Voltage PWM Output LED Driver, Voltage Driver LED Output PWM, Driver LED Output PWM, Driver LED Output, Driver LED |