M5STACK M5 Power Hub

Spesifikasi

• SoC: ESP32-S3-WROOM-1U-N16R2
• PSRAM: 2 MB
• Lampu kilat: 16 MB
• Wi-Fi: 2.4GHz
• Antena Nirkabel: SMA Internal Threaded Hole
• ukuran: 88.0 x 56.0 x 38.5 mm

Katrangan

PowerHub is an integrated programmable power management controller. It features the ESP32-S3-WROOM-1U-N16R2 as its main control unit, equipped with a dual-core Xtensa LX7 processor running at 240MHz and supporting 2.4GHz Wi-Fi. An integrated co-processor, the STM32G031G8U6, works with multiple INA226 voltage/current sensor ICs and electronic switching circuitry. This enables precise power management for multiple expansion interfaces and provides system-wide low-power wake-up capability. The controller integrates two HY2.0-4P interfaces (supporting I2C + UART), one RS485communication interface, and one CAN bus communication interface, facilitating easy connectionto various sensors and actuators. It includes both USB-A and USB Type-C ports. Leveraging the ESP32-S3’s USB OTGperipheral, these ports support both USB Host and Device functionality. Designed for applications like industrial automation control, smart home hubs, and IoTedge devices, the PowerHub provides developers with a stable and reliable core control solution.

Mulai cepet

1. Dolan maring Arduino resmi websitus lan nginstal Arduino IDE https://www.arduino.cc/en/Main/Software
2. Tambah Manager Papan ing ngisor iki URL kanggo File → Preferences → Additional→Boards Manager URLs: https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
3. Open the Boards Manager, search for “ESP32” ,and click install.
4. After installation, select the board “ESP32S3 DevModule”. 5.Configure the following options:
   • USB CDC On Boot: “Enabled” 2. USB Mode: “Hardware CDC and JTAG”

Tes Wi-Fi

• Pilih mantanampprogram "Examples” → “WiFi” → “WiFiScan”, choose the port corresponding to your device, and click the compile and upload button in the top-left corner. After uploading is complete, open the Serial Monitor to view Informasi scan Wi-Fi.

Tes BLE

• Pilih mantanampprogram "Examples"-"BLE"-"Scan", pilih port sing cocog karo piranti sampeyan, banjur klik tombol kompilasi lan upload ing pojok kiwa ndhuwur. Sawise upload rampung, bukak Monitor Serial kanggo view BLE scan information

FCC Warning

Piranti iki tundhuk karo bagean 15 saka Aturan FCC. Operasi tundhuk karo rong syarat ing ngisor iki:

1. Piranti iki bisa uga ora nyebabake gangguan mbebayani, lan
2. piranti iki kudu nampa gangguan apa wae sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.

Sembarang Owah-owahan utawa modifikasi sing ora disetujoni kanthi jelas dening pihak sing tanggung jawab kanggo kepatuhan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.

Cathetan: Peralatan iki wis dites lan ditemokake tundhuk karo watesan kanggo piranti digital Kelas B, miturut bagean 15 Aturan FCC. Watesan kasebut dirancang kanggo menehi pangayoman sing cukup marang gangguan sing mbebayani ing instalasi omah. Peralatan iki ngasilake panggunaan lan bisa mancarake energi frekuensi radio lan, yen ora dipasang lan digunakake miturut pandhuane, bisa nyebabake gangguan sing mbebayani kanggo komunikasi radio. Nanging, ora ana jaminan manawa gangguan ora bakal kedadeyan ing instalasi tartamtu. Yen peralatan iki nyebabake gangguan sing mbebayani kanggo panrima radio utawa televisi, sing bisa ditemtokake kanthi mateni lan nguripake peralatan kasebut, pangguna dianjurake kanggo nyoba mbenerake gangguan kasebut kanthi siji utawa luwih saka langkah-langkah ing ngisor iki:

• Reorient utawa pindhah antena panampa.
• Tambah pamisahan antarane peralatan lan panrima.
• Sambungake peralatan menyang stopkontak ing sirkuit beda saka sing panrima disambungake.
• Hubungi dealer utawa teknisi radio/TV sing berpengalaman kanggo njaluk bantuan.

Peralatan iki tundhuk karo watesan cahya radiasi FCC sing ditemtokake kanggo lingkungan sing ora dikendhaleni. Peralatan iki kudu dipasang lan dioperasikake kanthi jarak minimal 20cm antarane radiator lan awak.

Pitakonan

What are the main interfaces integrated into PowerHub?

PowerHub integrates two HY2.0-4P interfaces (supporting I2C + UART), one RS485 communication interface, and one CAN bus communication interface.

What applications is PowerHub suitable for?

PowerHub is designed for applications like industrial automation control, smart home hubs, and IoT edge devices.

How do I ensure FCC compliance when using PowerHub?

To ensure FCC compliance, follow the guidelines provided in the user manual, such as reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, and consulting a professional if needed.

Dokumen / Sumber Daya

M5STACK M5 Power Hub [pdf] Manual pangguna M5POWERHUB 2AN3W, M5POWERHUB 2AN3W, m5powerhub, M5 Power Hub, M5, Power Hub, Hub

Referensi

• Manual pangguna