To get started with your CANNY Smart Button, please ensure you have a CANNY Interface installed to the vehicle, and that channels have been assigned to the CANNY outputs. For more information on how to install CANNY, please click or scan the QR code. When installing a smart button for the first time, it is recommended to ensure the CANNY.LZR app is updated to the latest version.
CLICK (Single Press):
To toggle a function off and back on, once it has been activated by the vehicle CAN bus.
HOLD (>1 Sec):
To override a vehicle function, e.g. a driving light synced with the vehicle high beam, but that can instead be turned on independently. (Note: operation would reset once an on/off condition is received through the CAN bus).
DOUBLE-CLICK:
Used to temporarily disable the assigned function, e.g. a driving light synced with the vehicle high beam, can be disabled independently of the vehicle high beam. (Note: operation would reset after another double-click, or the CAN bus restarts after being inactive.)
LANGKAH 1.
From the Output Select Page, click the menu option in the top-right corner.
Pandhuan pangguna
LANGKAH 2.
Click ‘Smart Buttons’. (Note: it may be required to perform a firmware update – 2.1.0 or above required.)
LANGKAH 3.
Click ‘Start Searching’. Follow the on-screen instructions.
LANGKAH 4.
Click the ⋮ icon to access the Smart Button menu.
LANGKAH 5.
Click ‘Configure Smart Button’.
LANGKAH 6.
Nemtokake tombol menyang fungsi tartamtu (sing wis ditemtokake).
FAKTOR FAKTOR
Required if a Smart Button has previously been paired with a different CANNY – complete the steps below for a Battery Change, but within 5secs of re-installing the battery, press and hold the button for 10secs.
CARA NGowahi BATERAI
With the Smart Button held on a surface, twist the button anti-clockwise. Remove the old battery and replace with a new CR2032 battery (‘+’ side facing up). Reattach the top part of the Smart Button by twisting clockwise.
DUKUNGAN TAMBAHAN
Email: technical@lazerlamps.com
Telpon: +44 (0) 1992 677374
Pitakonan sing Sering Ditakoni
P: Kepiye carane ngreset Tombol Smart menyang setelan pabrik?
A: To perform a factory reset, follow these steps: 1. Access the Smart Button menu. 2. Select 'Factory Reset' option. 3. Confirm the reset action when prompted.
P: Apa sing kudu ditindakake yen Tombol Pinter ora nanggapi?
A: If your Smart Button is not responding, try replacing the battery first. If the issue persists, contact our technical support for assistance.
Dokumen / Sumber Daya
 |
Tombol Pinter LAZER CANNY [pdf] Pandhuan pangguna CANNY, CANNY Smart Button, Smart Button, Tombol |