KOLINK INSPIRE K8 Midi Tower Case
Manual pangguna
Spesifikasi
| Fitur | Rincian |
|---|---|
| Tipe Kasus | Midi Tower |
| Dhukungan Motherboard | ATX, Micro ATX, Mini ITX |
| Drive Bays | 2x3.5", 2x2.5" |
| slot Expansion | 7 |
| Dhukungan Kelangan | Front: 3 x 120mm, Top: 2 x 120mm, Rear: 1 x 120mm |
| ukuran | Kira-kira. 200mm x 430mm x 380mm |
Isi Paket
- Kolink Inspire K8 Case
- Manual pangguna
- Kit Aksesoris
PEDOMAN INSTALASI
Ngarep / PANEL SISI
- Copot panel ngarep kanthi narik kanthi teliti saka ngisor panel.
- Copot panel sisih kiwa kanthi nyopot 4 sekrup jempol lan angkat panel sisih kaca adoh saka kasus kasebut.
- Remove the right side panel bv removing the two rear thumbscrews and sliding the panel backwards.
INSTALASI MOTHERBOARD
- Selarasake motherboard karo sasis kanggo nemokake ngendi stand-off kudu diinstal.
- Sawise rampung, copot motherboard lan nyepetake stand-off.
- Lebokake motherboard 1/0 plate menyang cutout ing mburi cilik.
- Selehake motherboard menyang sasis, priksa manawa port mburi pas menyang 1/0 piring.
- Gunakake ngawut-awut motherboard kasedhiya kanggo masang motherboard kanggo sasis.
INSTALASI POWER SUPPLY
- Aace PSU in the bottom rear of the case, within the PSU shroud.
- Align the holes and secure With screws.
INSTALASI CARD GRAPHICS / PCI-E
- Remove the rear PCI-E slot covers as necessary (depending on the slot size of your card).
- Kasebut kanthi teliti, posisi lan geser kertu PCI-E menyang panggonan, banjur aman karo ngawut-awut kertu tambahan diwenehake.
INSTALASI SSD 2.5″
Secure the supplied SSD screws tc the 2.5″ SSD and then slot into the drop and lock slots on top of the PSU shroud and secure.
INSTALASI HDD 3.5″
Secure the supplied HDD screws to the 3.5″ HDD and then slot into the drop and lock slots behind the PSU shroud and secure.
INSTALASI FAN TOP
- Copot panyaring bledug saka ndhuwur kasus.
- Selarasake penggemar sampeyan menyang bolongan sekrup ing ndhuwur chassis lan aman nganggo sekrup.
- Ganti filter bledug sampeyan yen wis aman.
INSTALASI KIPAS ngarep / mburi
Selarasake penggemar menyang bolongan meneng ing chassis lan aman karo ngawut-awut.
INSTALASI RADIATOR WATERCOOLING
Secure the fans to the radiator, then fasten the radiator inside the chassis b} with strews from the Outside.
INSTALASI PANEL 1/0
- Carefully check the labelling of each connector from the 1/0 panel to identify their function.
- Referensi silang karo manual motherboard kanggo nemokake ngendi saben kabel kudu diinstal, banjur ngamanake siji-sijine. Mangga priksa manawa dipasang ing polaritas sing bener supaya ora ana fungsi utawa karusakan.
FAQ
What motherboards are compatible with the Kolink Inspire K8?
Kasus kasebut ndhukung motherboard ATX, Micro-ATX, lan Mini-ITX.
Carane akeh penggemar bisa diinstal ing kasus?
No, fans are not pre-installed. You need to purchase them separately.
Apa dawa GPU maksimum sing didhukung?
The case supports GPUs up to approximately 330mm in length.
Kepiye cara ngresiki filter bledug?
Remove the filters from the case and clean them with compressed air or wash them with water and let them dry completely before reinstalling.
Dokumen / Sumber Daya
 |
KOLINK INSPIRE K8 Midi Tower Case [pdf] Manual pangguna 04023, ANL-INT, INSPIRE K8 Midi Tower Case, INSPIRE K8, Midi Tower Case, Tower Case, Case |