Pandhuan wiwitan cepet
Cloud Flight HyperX Firmware Updater

I. Nganyari headset lan adaptor nirkabel USB

Sadurunge miwiti updater, siyapake kabel USB mikro kanthi headset Penerbangan lan adaptor nirkabel USB. Headset lan adaptor nirkabel USB kudu disambungake menyang PC supaya firmware nganyari kanthi bener.

1. Sambungake headset menyang port USB ing PC nggunakake kabel USB mikro.
2. Sambungake adaptor nirkabel USB menyang port USB ing PC.
3. Jalanake pembaruan firmware Hyper X.
4. Klik tombol Anyari nalika aplikasi wis siyap.
5. A prompt bakal muncul takon yen sampeyan pengin terus. Klik tombol Ya kanggo nerusake.
6. Ngenteni update firmware kanggo nganyari headset lan adaptor nirkabel USB.
7. Sawise nganyari rampung, klik tombol OK kanggo nutup pituduh.
8. Sambungake maneh adaptor nirkabel USB lan pasang headset.

Headset pesawat lan adaptor nirkabel USB saiki kudu ana ing firmware paling anyar.

II. Pasangan headset

Sawise nindakake nganyari firmware, headset lan adaptor nirkabel USB kudu dipasang maneh sadurunge digunakake.

1. Pateni headset.
2. Pasang adaptor nirkabel USB menyang PC.
3. Gunakake pin cilik kanggo pencet tombol cilik ing sisih mburi adaptor nirkabel USB.
4. LED adaptor nirkabel USB bakal cepet kedhip.
5. Pencet dawa tombol daya nganti 10 detik kanggo mlebu mode pasangan.
6. LED cup kuping headset bakal cepet kedhip.
7. Yen LED ing adaptor nirkabel USB lan cuping kuping headset wis solid, pasangan bakal rampung.

HYPERX Cloud Flight HyperX Firmware Updater Quick Start Guide - Download [dioptimalake]
HYPERX Cloud Flight HyperX Firmware Updater Quick Start Guide - Ngundhuh

Referensi

• Manual pangguna