DONNER DMK-25 MIDI Keyboard Controller Manual Pamilik
PAKET kalebu
- DMK-25 keyboard midi
- Kabel USB standar
- Manual Pamilik
SOFTWARE sing bisa disambungake
- Cubase / Nuendo
- audisi
- Cakewalk / Sonar
- Alat pro
- FI sinau
- Garageband
- Logika
- Kontak
- Reaper
- alesan
- wangun gelombang
FITUR
PITCH/MODULASI
Bar Tutul sing bisa ditugasake, bisa ditugasake kanggo ngirim pesen Kontrol Ganti (sabanjuré diarani 'CC') utawa pesen Pitch Bend Change (sabanjuré diarani 'Pitch'). Saluran MIDI bisa ditugasake kanggo saben. Kisaran 0-16. 0 minangka saluran Global, sing bakal ngetutake saluran Keyboard. 1-16 minangka saluran MIDI standar.
PAD
PAD sing bisa ditugasake, bisa ditugasake kanggo ngirim pesen Wigati Ganti (sabanjuré diarani 'Cathetan') utawa pesen Program Ganti (sabanjuré disebut 'PC'). Gunakake [PAD Bank] kanggo ngalih Bank A utawa Bank B. Gunakake [PROGRAM] kanggo ngalih bantalan kanggo ngirim pesen Wigati utawa PC (PROGRAM CHANGE). Sampeyan bisa ngganti sinyal PC sing bakal dipancarake liwat editor. Saluran MIDI bisa ditugasake kanggo saben. Kisaran 0-16 (padha karo Touch Bar).
TOMBOL TRANSPORTASI
- Tombol sing bisa ditugasake, bisa ditugasake kanggo ngirim pesen CC.
- Saluran MIDI bisa ditugasake kanggo saben wong. Kisaran 0-16 (padha karo Touch Bar).
- Tombol duwe 2 Mode, 0 kanggo ToggIe, 1 kanggo Momentary.
- Toggle: Tombol "latches"; iku ngirim pesen sing terus-terusan nalika pisanan dipencet lan mandheg ngirim nalika dipencet kaping pindho.
- Sedhela: Tombol ngirim pesen nalika dipencet lan mandheg nalika diluncurake.
KI-K4
- Knobs sing bisa ditugasake, bisa ditugasake kanggo ngirim pesen CC.
- Gunakake [K Bank] kanggo ngalih Bank A utawa Bank B.
- Saluran MIDI bisa ditugasake kanggo saben. Kisaran 0-16 (padha karo Touch Bar).
S1-S4
- Slider sing bisa ditugasake, bisa ditugasake kanggo ngirim pesen CC.
- Gunakake [S Bank] kanggo ngalih Bank A utawa Bank B.
- Saluran MIDI bisa ditugasake kanggo saben wong .Rentange yaiku 0-16 (padha karo Touch Bar).
KEYBOARD
- Saluran MIDI bisa ditugasake, Jarake 1-16;
- 4 tutul Curve, Kisaran punika 0-3;
- Gunakake | RANSPOSE +/-] kanggo ngganti nada munggah/mudhun kanthi semi-nada, kisaran -12-12. Pencet [TRANSPOSE +] lan [TRANSPOSE -] ing wektu sing padha bakal nyetel transpose menyang 0;
- Gunakake [OKTAVE +/-] kanggo ngganti pitch munggah / mudhun dening oktaf, sawetara -3-3 .Pencet [OKTAVE +] lan [OKTAVE -] ing wektu sing padha bakal nyetel oktaf kanggo 0;
- Multi-Fungsi kanggo EDIT,
NYONGGO
- Antarmuka pedal sustain bisa disambungake menyang pedal kanggo entuk fungsi sustain.
Nilai CC lan CN uga bisa diowahi liwat editor. - Saluran MIDI bisa ditugasake, Jarake 0-16 (padha karo Bar Tutul)
Antarmuka USB
- Jinis antarmuka TYPE C, nggunakake kabel USB standar kanggo nyambung menyang komputer, lan nyambungake piranti lunak DAW kanggo mbukak sumber audio bisa digunakake.
- Elinga yen antarmuka piranti sing disambungake dudu port USB A biasa, sampeyan kudu nggunakake kabel adaptor kanthi fungsi OTG kanggo transfer.
- Sumber Daya: USB SUPPLY: 5V 100mA
SAVE / MUAT
Cathetan:
Saben DMK25 diuripake, setelan ing ndhaftar RAM bakal diwaca.
Yen sampeyan kudu nggunakake setelan khusus PROG1-PROG4, sampeyan kudu nggunakake fungsi [LOAD] kanggo mbukak.
Saben-saben sawise nyunting DMK25, sampeyan kudu nggunakake fungsi [SAVE] kanggo nyimpen.
4 Prasetel Program, PROG1-PROG4.
- MUNGKIN
- Pencet [PAD BANK] lan [PROGRAM] bebarengan kanggo mlebu status Loading, LED [PAD BANK] lan [PROGRAM] kedhip, penet PROG1-PROG4 sing pengin dimuat prasetel program, PROG sing sampeyan pencet bakal murup yen PROG iki ora kosong.
- Bakal metu saka status loading 3 detik mengko sawise sampeyan menet (utawa ora menet) siji PROG, utawa sampeyan bisa menet [PAD BANK] utawa [PROGRAM] kanggo metu saka status loading cepet.
- SIMPAN
- Pencet [K BANK] lan [S BANK] bebarengan kanggo ngetik negara Simpenan, LED [K BANK] lan [S BANK] kedhip, penet PROG1-PROG4 sampeyan pengin nyimpen parameter, PROG sing sampeyan pencet bakal lampu.
- Bakal metu saka negara nyimpen 3 detik mengko sawise sampeyan menet (utawa ora menet) siji PROG, utawa sampeyan bisa menet [K BANK] utawa [S BANK] kanggo metu saka negara nyimpen cepet.
EDIT
Pencet {TRANSPOSE +] lan [OCTAVE +] bebarengan kanggo ngetik negara Sunting, LED {TRANSPOSE +/-] lan [OCTAVE +/-] kedhip.
Sawise ngetik mode EDIT, langkah-langkah operasi yaiku:
Pisanan, pilih konten sing bakal diowahi (CC, CN, MODE, CURVE, lan liya-liyane, operasi kasebut bisa dioper karo saben liyane, ngoper bakal nyimpen nilai sing wis dilebokake sadurunge);
Banjur pilih obyek sing bakal diowahi (kayata bar tutul, pad strike, keyboard, knob, lan liya-liyane, operasi bisa dioper karo saben liyane, ngoper bakal nyimpen nilai sing wis dilebokake sadurunge);
Banjur ing area keyboard, ketik nilai sing cocog ing area keyboard. Nalika kabeh suntingan wis rampung, klik [EXIT] utawa [ENTER] kanggo mbatalake utawa nyimpen suntingan.
CC(TUGAS):
- Temtokake saben unit (Touch Bar, PAD, Tombol, Knob, Slider, Pedal, Keyboard) nomer pesen CC (utawa Cathetan, utawa PC).
- Pencet [CC] kanggo ngetik status CCAssignment, pilih siji unit sing pengin ditugasake, kanthi mencet utawa mindhah, LED ing jejere bakal sumunar):
- yen sampeyan milih K1-K4, ing | RANSPOSE +] kedhip;
- yen S1-S4, ing | RANSPOSE -] kedhip;
- yen PEDAL, [OKTAVE +] kedhip; yen Keyboard, [OCTAVE -] kedhip
- Gunakake tombol angka 0-9 kanggo ngetik nomer kaya mangkene: 000, 001, 002,…….127.
- Pilih unit liyane sing pengin sampeyan nemtokake siji-siji sadurunge EXIT utawa ENTER
CN (SALURAN):
- Nemtokake saluran saben unit.
- Pencet [CN] kanggo ngetik status ChannelAssignment, pilih siji unit sing pengin ditugasake, padha karo ing ndhuwur.
- Pencet sembarang tombol kosong (tombol tanpa fungsi apa wae) ing Papan Ketik kanggo milih Papan Ketik.
- Gunakake tombol angka 0-9 kanggo ngetik nomer kaya iki: 00, 01, 01, …… 16.
- Pilih unit liyane sing pengin sampeyan nemtokake siji-siji sadurunge EXIT utawa ENTER
directions:
- Nemtokake mode Tombol.
- Pencet [MODE] kanggo ngetik status Mode Assignment, pilih tombol siji sing pengin ditugasake.
- Gunakake tombol angka 0-1 kanggo ngetik nomer kaya iki: 0 utawa 1.0 kanggo Toggle, 1 kanggo Momentary.
- Pilih tombol liyane sing pengin sampeyan nemtokake siji-siji sadurunge EXIT utawa ENTER
KURVE:
- Temtokake kurva tutul PAD utawa Keyboard.
- Pencet [CURVE] kanggo ngetik status Curve Assignment, pilih PAD utawa Keyboard sing pengin ditugasake.
- Gunakake tombol angka 0-4 kanggo ngetik nomer kaya iki: 0,1,. …..4.
Nutul Kurva Kekuwatan Pad
Kurva Gaya Keyboard
MUTU:
Metu saka status EDIT tanpa owah-owahan.
ENTER:
Metu saka negara EDIT kanthi owah-owahan.
DAFTAR UNIT ASSIGNABLE (Native)
Tabel ing ngisor iki nuduhake paramèter gawan kanggo saben modul mesin adhedhasar Standard MIDI, listing sawetara setelan kasedhiya kanggo saben modul CC lan CN lan nilai gawan.
| Unit | Saluran
Range |
Default
Saluran |
Menehi
Range |
Default
Menehi |
| PITCH | 0-16 | 0 (Global) | 0-128 | 128 (Pitik) |
| MODULASI | 0-16 | 0 (Global) | 0-128 | 1 (Modulasi) |
| PAD1 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 36 (Bass Kit) |
| PAD2 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 38 (Sing) |
| PAD3 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 42 (Hi-Hat Tertutup) |
| PAD4 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 46 (Open Hi-Hat) |
| PAD5 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 49 (Crash Cymbal) |
| PAD6 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 45 (Tom Low) |
| PAD7 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 41 (Lantai Tom) |
| PAD8 (CATATAN)(BANK A) | 0-16 | 10 (Drum) | 0-127 | 51 (Tunggang Cymbal) |
| PAD1 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 36 (Bass Kit) |
| PAD2 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 38 (Singgi) |
| PAD3 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 42 (Hi-Hat Tertutup) |
| PAD4 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 46 (Open Hi-Hat) |
| PAD5 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 49 (Crash Cymbal) |
| PAD6 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 45 (Tom Low) |
| PAD7 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 41 (Lantai Tom) |
| PAD8 (CATATAN)(BANK B) | 0-16 | 10 (Drum) | 0-127 | 51 (Tunggang Cymbal) |
| PAD1-PAD8(PC)(BANK A/B) | 0-16 | 0 (Global) | 0-127 | 0-15 |
| TOMBOL | 0-16 | 1 | 0-127 | 15-20 |
| K1 (BANK A) | 0-16 | 0 (Global) | 0-127 | 10 (Pan) |
| K2 (BANK A) | 0-16 | 0 (Global) | 0-127 | 91 (Kab.) |
| K3 (BANK A) | 0-16 | 0 (Global) | 0-127 | 93 (Koro) |
| K4 (BANK A) | 0-16 | 0 (Global) | 0-127 | 73 (Serangan) |
| K1 (BANK B) | 0-16 | 0 (Global) | 0-127 | 75 (Busak) |
| K2 (BANK B) | 0-16 | 0 (Global) | 0-127 | 72 (Release) |
| K3 (BANK B) | 0-16 | 0 (Global) | 0-127 | 74 (Cutoff} |
| K4 (BANK B) | 0-16 | 0 (Global) | 0-127 | 71 (Resonansi) |
| S1-S4 (BANK A/B) | 0-16 | 1-8 | 0-127 | 7 (Volume) |
| PEDAL | 0-16 | 0 (Global) | 0-127 | 64 (Sugeng) |
| KEYBOARD | 1-16 | 1 |
DAFTAR UNIT ASSIGNABLE
Tabel ing ngisor iki nuduhake menu sing cocog karo nilai CC controller ing protokol MIDI standar.
Kanggo example, ngganti CC saka unit kontrol, kayata tombol K1, kanggo 7 bakal ngidini tombol K1 kanggo nindakake fungsi kontrol volume sawijining saluran.
Utawa ngganti CC saka unit kontrol, kayata tombol K1, kanggo 11 bakal ngidini tombol K1 kanggo ngontrol output expression. Liyane padha.
| NO. | DEFINISI | RANGE VALUE |
| 0 | (MSB) BANK PILIH | 0-127 |
| 1 | (MSB) MODULASI | 0-127 |
| 2 | (MSB) AMBEGAN MSB | 0-127 |
| 3 | (MSB) UNDEFINE | 0-127 |
| 4 | (MSB) KONTROL KAKI | 0-127 |
| 5 | (MSB) PORTAMENTO TIME | 0-127 |
| 6 | (MSB) ENTRY DATA | 0-127 |
| 7 | (MSB) VOLUME SALURAN | 0-127 |
| 8 | (MSB) BALANCE | 0-127 |
| 9 | (MSB) UNDEFINE | 0-127 |
| 10 | (MSB) PAN | 0-127 |
| 11 | (MSB) EXPRESS | 0-127 |
| 12 | (MSB) KONTROL EFEK 1 | 0-127 |
| 13 | (MSB) KONTROL EFEK 2 | 0-127 |
| 14-15 | (MSB) UNDEFINE | 0-127 |
| 16 | (MSB) GENERAL TUJUAN CONTROLLER 1 | 0-127 |
| 17 | (MSB) GENERAL TUJUAN CONTROLLER 2 | 0-127 |
| 18 | (MSB) GENERAL TUJUAN CONTROLLER 3 | 0-127 |
| 19 | (MSB) GENERAL TUJUAN CONTROLLER 4 | 0-127 |
| 20-31 | (MSB) UNDEFINE | 0-127 |
| 32 | (LSB) BANK PILIH | 0-127 |
| 33 | (LSB) MODULASI | 0-127 |
| 34 | (LSB) AMBEGAN | 0-127 |
| 35 | (LSB) UNDEFINE | 0-127 |
| 36 | (LSB) KONTROL KAKI | 0-127 |
| 37 | (LSB) WAKTU PORTAMENTO | 0-127 |
| 38 | (LSB) ENTRY DATA | 0-127 |
| 39 | (LSB) VOLUME SALURAN | 0-127 |
| 40 | (LSB) BALANCE | 0-127 |
| 41 | (LSB) UNDEFINE | 0-127 |
| 42 | (LSB) PAN | 0-127 |
| 43 | (LSB) EXPRESS | 0-127 |
| 44 | (LSB) KONTROL EFEK 1 | 0-127 |
| 45 | (LSB) KONTROL EFEK 2 | 0-127 |
| 46-47 | (LSB) UNDEFINE | 0-127 |
| 48 | (LSB) PENGENDALIAN GENERAL TUJUAN 1 | 0-127 |
| 49 | (LSB) PENGENDALIAN GENERAL TUJUAN 2 | 0-127 |
| 50 | (LSB) PENGENDALIAN GENERAL TUJUAN 3 | 0-127 |
| 51 | (LSB) PENGENDALIAN GENERAL TUJUAN 4 | 0-127 |
| 52-63 | (LSB) UNDEFINE | 0-127 |
| 64 | SUSTAIN PEDAL | •63OFF,•64ON |
| 65 | PORTAMENTO | <63 OFF, »64 OFF |
| 66 | SOSTENUTO | <63 OFF, >64 OFF |
| 67 | PEDAL LEMBUT | <63 OFF, >64 OFF |
| 68 | LEGATO FOOTSWITCH | <63 NORMAL, > 64 LEGATO |
| 69 | TAHAN 2 | <63 OFF, >64 OFF |
| 70 | VARIASI | 0127 |
| 71 | RESONAN | 0-127 |
| 72 | RELEASE TIME | 0127 |
| 73 | WAKTU SERANGAN | 0127 |
| 74 | CUTOFF | 0127 |
| 75 | WAKTU BOSO | 0127 |
| 76 | RATE VIBRATO | 0127 |
| 77 | KETEBALAN GEDET | 0127 |
| 78 | PANUTUP VIBRATO | 0127 |
| 79 | UNDEFINE | 0127 |
| 80 | PENGENDALIAN TUJUAN UMUM 5 | 0127 |
| 81 | PENGENDALIAN TUJUAN UMUM 6 | 0127 |
| 82 | PENGENDALIAN TUJUAN UMUM 7 | 0127 |
| 83 | PENGENDALIAN TUJUAN UMUM 8 | 0127 |
| 84 | KONTROL PORTAMENTO | 0127 |
| 85-90 | UNDEFINE | 0127 |
| 91 | REVERB DEPTH | 0127 |
| 92 | TREMOLO DEPTH | 0127 |
| 93 | KORUS DEPTH | 0127 |
| 94 | CELESTE / DETUME DEPTH | 0127 |
| 95 | PHATSER ambane | 0127 |
| 96 | PENINGKATAN DATA | 0127 |
| 97 | PENURUNAN DATA | 0127 |
| 98 | (LSB) NRPN | 0127 |
| 99 | (MSB) NRPN | 0127 |
| 100 | (LSB) RPN | 0127 |
| 101 | (MSB) RPN | 0127 |
| 102-119 | UNDEFINE | 0127 |
| 120 | ALL Swara OFF | 0 |
| 121 | RESET ALL KONTROL | 0 |
| 122 | KONTROL LOKAL | 0OFF,l27ON |
| 123 | ALL Cathetan OFF | 0 |
| 124 | OMNI MATI | 0 |
| 125 | OMNI ON | 0 |
| 126 | MONO | 0 |
| 127 | POLY | 0 |
| 128 | PITCH BEND | 0127 |
Dokumen / Sumber Daya
 |
DONNER DMK-25 MIDI Keyboard Controller [pdf] Manual Pamilik DMK-25, MIDI Keyboard Controller, DMK-25 MIDI Keyboard Controller, Keyboard Controller, Controller |
