DOEPFER MUSIKELEKTRONIK GMBH
SISTEM MODULAR ANALOG A-100
A-147-4 Dual VCLFO
Posisi lan fungsi header pin lan potentiometer trimming Papan A
- P13: SKALA LFO1
- P12: OFFSET LFO1
- JP6: RANGKA FREKUENSI LFO1
- JP8: JENIS RESET LFO1
- JP7: RECTANGLE DC OFFSET LFO1
- P17: RESET VOLTAGE
- P14: SEGITIGA DC OFFSET LFO1
- P16: SAWTOOTH DC OFFSET LFO1
- P15: SINE ADJUST LFO1
- JP14/JP15: JUMPER PARKING
- JP1: Konektor Bus
- P10: SINE ADJUST LFO2
- P11: SAWTOOTH DC OFFSET LFO2
- P9: TRIANGLE DC OFFSET LFO2
- JP9: JENIS RESET LFO2
- JP5: RECTANGLE DC OFFSET LFO2
- JP4: RANGKA FREKUENSI LFO2
- P8: SKALA LFO2
- P7: OFFSET LFO2
Jumper sing ditandhani werna abu-abu JP4 lan JP6 ora diinstal ing pabrik. Yen perlu, jumper goblok saka JP14 / JP15 bisa digunakake.
Posisi lan fungsi header pin lan potentiometer trimming Papan B
- JP13: TUNE RANGE LFO2
- JP12: CV DEFAULT LFO2
- JP10: CV DEFAULT LFO1
- JP11: TUNE RANGE LFO1
Fungsi header pin
Papan A
sambungan bus JP1
Sambungan internal JP2A/B antarane papan A lan B
Sambungan internal JP3A/B antarane papan A lan B
JP4 Frequency Range LFO2 (ora dipasang ing pabrik)
jumper diinstal: sawetara frekuensi kurang
jumper ora diinstal: sawetara frekuensi dhuwur
JP5 Rectangle DC Offset Range LFO2
jumper dipasang: persegi panjang bipolar/simetris (~ -5V/+5V)
jumper ora dipasang: persegi panjang unipolar/positif (~ 0V/+10V)
JP6 Frequency Range LFO1 (ora dipasang ing pabrik)
jumper diinstal: sawetara frekuensi kurang
jumper ora diinstal: sawetara frekuensi dhuwur
JP7 Rectangle DC Offset Range LFO1
jumper dipasang: persegi panjang bipolar/simetris (~ -5V/+5V)
jumper ora dipasang: persegi panjang unipolar/positif (~ 0V/+10V)
JP8 Reset Tipe LFO1
jumper diinstal: tingkat kontrol reset (reset aktif anggere input reset dhuwur)
jumper ora diinstal: positif pinggiran kontrol reset
JP9 Reset Tipe LFO2
jumper diinstal: tingkat kontrol reset (reset aktif anggere input reset dhuwur)
jumper ora diinstal: positif pinggiran kontrol reset
JP14 Dummy Pin Header (Jumper Parking): parkir saka jumper sing ora digunakake
JP15 Dummy Pin Header (Jumper Parking): parkir saka jumper sing ora digunakake
Papan B
JP10 Default CV LFO1
jumper diinstal: CV soket input normalled kanggo vol positiftage (~ +5V)
jumper ora diinstal: ora normaling soket input CV
JP11 Tune Range LFO1
jumper diinstal: sawetara saka sudhut kontrol frekuensi manual F
jumper ora diinstal: sawetara cilik saka kontrol frekuensi manual F
JP12 Default CV LFO2
jumper diinstal: CV soket input normalled kanggo vol positiftage (~ +5V)
jumper ora diinstal: ora normaling soket input CV
JP13 Tune Range LFO2
jumper diinstal: sawetara saka sudhut kontrol frekuensi manual F
jumper ora diinstal: sawetara cilik saka kontrol frekuensi manual F
Fungsi saka trimming potentiometers
Papan A
P7 Frekuensi Offset LFO2
Skala Frekuensi P8 LFO2 (setelan pabrik: 1V/Okt nalika kontrol CV kebak CW)
P9 Triangle DC Offset LFO2 (setelan pabrik: segitiga bipolar/simetris)
P10 Sine Adjust LFO2 (setelan pabrik: bentuk sinus paling apik)
P11 Sawtooth DC Offset LFO2 (setelan pabrik: bipolar/simetris sawtooth)
P12 Frekuensi Offset LFO1
Skala Frekuensi P13 LFO1 (setelan pabrik: 1V/Okt nalika kontrol CV kebak CW)
P14 Triangle DC Offset LFO1 (setelan pabrik: segitiga bipolar/simetris)
P15 Sine Adjust LFO1 (setelan pabrik: bentuk sinus paling apik)
P16 Sawtooth DC Offset LFO1 (setelan pabrik: bipolar/simetris sawtooth)
P17 Reset Voltage
(iki voltage ngendi segitiga LFOs diwiwiti sawise reset, setelan pabrik 0V)
Cathetan penting: Mangga ngganti setelan potentiometer trimming mung yen sampeyan wis menowo karo pangaturan kuwi lan ngerti fungsi. Kanggo modul sing bali dening customer karo potentiometers trimming misadjusted wektu apa sing dibutuhake kanggo mbenerake imbuhan dikenani biaya.
A-147-4 Service Manual Seite
Dokumen / Sumber Daya
 |
DOEPFER MUSIKELEKTRONIK A-100 Analog Modular System [pdf] Pandhuan A-100, A-100 Sistem Modular Analog, Sistem Modular Analog, Sistem Modular, Sistem |
