Manual Pengguna Sistem Manajemen Filamen CREALITY CFS-C

CFS- C

Manual pangguna

Sistem Manajemen Filamen CFS-C

V 1.0_EN

Kanggo Panganggo sing Ditresnani

Matur nuwun kanggo milih Creality. Kanggo penak, waca Manual pangguna iki sadurunge miwiti lan tindakake pandhuan sing diwenehake kanthi ati-ati.
Creality tansah siyap nyedhiyakake layanan sing berkualitas. Yen sampeyan nemoni masalah utawa duwe pitakon nalika nggunakake produk, gunakake informasi kontak ing mburi manual iki kanggo hubungi kita. Kanggo luwih nambah pengalaman pangguna, sampeyan bisa nemokake luwih akeh babagan piranti liwat cara ing ngisor iki:
Dolan maring resmi kita websitus (https://www.creality.com) kanggo nggoleki informasi babagan piranti lunak, hardware, informasi kontak, instruksi piranti, informasi garansi piranti, lan liya-liyane.

Nganyarke Firmware

1. Sampeyan bisa nganyarke perangkat kukuh langsung liwat layar piranti;
2. Sampeyan bisa nganyarke perangkat kukuh liwat Creality Cloud OTA;
3. Mangga ngunjungi pejabat websitus https://www.creality.com, click on “Support → Download Center ”, select the corresponding model to download the required firmware, (Or click on “Creality Cloud → Downloads → Firmware”) , after installation is complete, you can use it.

Informasi Operasi Produk lan Layanan Sawise Penjualan

1. Sampeyan bisa mlebu menyang Wiki Resmi Creality (https://wiki.creality.com) kanggo njelajah tutorial layanan sawise-sales sing luwih rinci.
2. Utawa hubungi pusat layanan sawise-sales ing +86 755 3396 5666, utawa ngirim e-mail menyang cs@creaity.com.

Wiki Kreativitas

CATATAN

1. Aja nggunakake printer kanthi cara apa wae kajaba sing diterangake ing kene supaya ora cilaka pribadi utawa karusakan properti;
2. Aja nyelehake mesin ing cedhak sumber panas utawa obyek sing gampang kobong utawa mbledhos. Disaranake dilebokake ing lingkungan sing berventilasi apik, kelangan lan tanpa bledug;
3. Disaranake nggunakake filamen seri tray plastik Creality Hyper, sing wis diuji sacara ekstensif;
4. Aja nggunakake kabel daya produk liyane nalika instalasi. Tansah nggunakake kabel daya ditempelake lan priksa manawa plug daya kudu kepasang menyang ground stopkontak telung prong;
5. Kanggo nyegah senggol filamen, aja nggunakake TPU utawa PVA (udan) lan BVOH (udan) kanggo nyetak;
6. Aja nganggo sarung tangan utawa bungkus nalika ngoperasikake mesin kanggo nyegah kejepitan bagean sing bisa dipindhah sing bisa nyebabake ciloko remuk lan nglereni ing bagean awak;
7. Kanggo ngindhari spool filamen macet, aja nggunakake spool kardus kanthi pinggir sing ora diobati utawa spool kardus sing cacat kabeh;
8. Pangguna kudu tundhuk karo hukum lan peraturan negara lan wilayah sing cocog ing ngendi peralatan kasebut (digunakake), netepi etika profesional, nggatekake kewajiban safety, lan nglarang banget nggunakake produk utawa peralatan kita kanggo tujuan ilegal. Creality ora bakal tanggung jawab kanggo tanggung jawab hukum sing nglanggar ing kahanan apa wae.
9. Tip: Aja plug in utawa copot kabel ing basis daya.

1. Informasi Peralatan

1.1 Daftar Packing

(1) CFS- C Main	(2) Modul Buffer Cutter

PAKET AKSESORI

(3) Modul Komunikasi	(4) Creality CAN Cable ×2	(5) Pandhuan cepet	(6) kertu layanan sawise-sales
(7) Adaptor Daya	(8) PTFE Pipe Holder	(9) Deteksi Filamen	(10) Cutter Module Mounting Bracket
(11) Cutter Module Mounting Bracket	(12) Kabel data USB Tipe-C	(13) Spare Cutter	(14) Hex Wrench 1.5 / 2.0 / 2.5
(15) Penahan Kabel USB	(16) Communication Module Adhesive	(17) PTFE Tube 200mm*3	(18) PTFE Tube 230mm*2
(19) PTFE Tube 1200mm	(20) PTFE Tube 60mm*4	(21) PTFE Tube 2000mm	(22) Cable Organizer Velcro Strap*5
(23) Nylon Cable Tie*6	(24) Paper Waste Bin 180×100×80mm	(24) Hex Socket Cap Screw M2×6 4PCS (For fixing cutter) Hex Socket Cap Screw M3×20 2PCS (For fixing filament detection sensor) Hex Socket Cap Screw M3×8 2PCS (For fixing PTFE tube clip) Hex Socket Self-tapping Screw M3×8 8PCS (For fixing top cover)

Cathetan:

1. Bagean ing ndhuwur mung kanggo referensi. Mangga deleng item nyata.
2. Kabeh komponen CFS-C kudu digunakake bebarengan karo printer.

1.2 Babagan Peralatan

1. Port Komunikasi CAN
2. Soket adaptor daya
3. 5-Way PTFE Tube exit
4. Blok kompresi filamen
5. Desiccant storage location
6. Filament inlet
7. Gesper kiwa
8. Filament status light
9. Layar
10. Gesper tengen

1. Communication Power Port
2. Tutup Ngarep
3. Tutup mburi
4. 5-Way PTFE Tube Inlet
5. Buffer Empty Limit Sensor
6. Buffer Lever
7. Buffer Full Limit Sensor
8. Lampu Indikator Status

1. Slot sing dipasang
2. PTFE Tube Outlet

1. Port RS-485
2. Port CAN

1. Port USB Tipe-C
2. Port USB 2.0

1.3 Spesifikasi Peralatan

Parameter dhasar

Model	CFS- C
Jumlah silo	4
Daya Rated	30W
Dinilai Voltage	DC 24V
Nomer sing bisa ditambahi	≤4
Ukuran produk	379 * 314 * 276 mm
bobot net	5.05 kg
Lampu indikator multifungsi status filamen	Papat [siji kanggo saben saluran]
Lampu Indikator Status Komunikasi	Klebu
Multi- color printing	ya wis
Isi ulang otomatis	ya wis
Auto Material Feeding(Color Ignored)	ya wis
identifikasi RFID	ya wis
Deteksi filamen	ya wis
Penyangga Cutter	ya wis
pangatusan	Metode desiccant
Tipe filamen sing cocog	PLA/ABS/PETG/ASA/PET/PA-CF/PLA-CF… (Incompatible moisture-sensitive water-soluble support filaments and soft filaments)
diameteripun filamen	1.75 ± 0.05 mm
Kompatibilitas gulungan filamen	1kg roll or roll diameter: 197-202mm; roll thickness: 42-68mm

1.4 Ukuran peralatan

2. Unboxing

2.1 Unpack the desiccant and put it into CFS-C

(1) Bukak CFS: Push gesper ngunci ing loro-lorone CFS menyang mburi kanggo mbukak kunci lan mbukak tutup ndhuwur;

Mangga priksa manawa daya wis pedhot sajrone proses unboxing/instalasi lan pangopènan apa wae sing nglibatake sambungan kabel.

(2) Temokake lokasi panyimpenan desiccant, bukak tutup ndhuwur lan lebokake desiccant, banjur tutup maneh tutup ndhuwur.

Mangga copot film protèktif saka permukaan desiccant, banjur lebokake desiccant menyang sistem manajemen CFS-C Main consumables.

2.2 CFS-C Component Unboxing and Installation

(1) Copot krenjang suspensi sing bisa digunakake saka printer asli.

(2) Remove the cutter module bracket, insert it into the printer’s threaded hole, and rotate it clockwise by approximately 140°. Check that the bracket shows no significant wobbling.

CFS-C, minangka aksesori, bisa uga duwe variasi tipis ing cara instalasi nalika digabungake karo model printer sing beda. Artikel iki nggunakake K1C minangka mantanample; kanggo model liyane, mangga deleng Wiki resmi.

(3) Amanake modul buffer pemotong menyang titik dhukungan logam gantung saka krenjang modul pemotong liwat rong bolongan sing dipasang ing mburi.

(4) Yen ana, copot dhisik tutup ndhuwur printer.

(5) Copot tutup motor ing printhead printer, kanthi ati-ati supaya ora kobong saka motor sing panas banget.

(6) Pedhot tabung PTFE ana dipasang menyang extruder, banjur alon-alon narik mburi liyane saka tabung PTFE kanggo retract bagean pedhot menyang operator kabel.

(7) Gunakake kunci saka paket aksesoris kanggo mbusak meneng mbenakake.

(8) Copot kabel saka sensor deteksi filamen asli printer.

(9) Insert the filament detection sensor into the PTFE tube connector above the printhead, and connect the other end to the machine’s filament detection port.
Then, secure the sensor to the printhead using an M3x20mm screw. Route the sensor’s cable through or embed it within the cable carrier, and secure it with cable ties. It is recommended to use at least four attachment points

Dokumen / Sumber Daya

CREALITY CFS-C Sistem Manajemen Filamen [pdf] Manual pangguna CFS-C, CFS-C Sistem Manajemen Filamen, Sistem Manajemen Filamen, Sistem Manajemen

Referensi

• Manual pangguna