cisco HyperFlex Hyper-Converged Infrastructure

Cara Nganyarke sing Disaranake

Kanggo upgrade gabungan lan upgrade pamisah, Cisco nyaranake nganyarke komponen HyperFlex ing urutan ngisor iki kanggo ngoptimalake wektu upgrade:

Cathetan
Priksa manawa kanggo nganyarke vCenter menyang versi sing dikarepake adhedhasar versi ESXi lan rekomendasi saka VMware sadurunge nganyarke ESXi.

Minangka bagéan saka operasi upgrade Firmware Server sing diwiwiti saka HX Connect, sawetara kabijakan UCS bisa uga dianyari supaya kompatibel karo versi HXDP anyar. Owah-owahan iki mung ditrapake kanggo kelenjar sing minangka bagéan saka kluster sing dianyari. Disaranake nggunakake HX Connect kanggo miwiti upgrade Firmware Server supaya ora ana kabijakan.

1. Nganyarke Cisco UCS Infrastructure
2. Nganyarke Cisco HX Data Platform
3. Nganyarke Cisco VMware ESXi selaras
4. Nganyari perangkat kukuh Cisco UCS

Nganyarke HyperFlex Cluster Nggunakake HX Connect UI

Cathetan
Utilitas Priksa Kesehatan Hypercheck- Cisco nyaranake nglakokake utilitas pemeriksaan kesehatan proaktif iki ing kluster HyperFlex sadurunge nganyarke. Pemriksaan kasebut nyedhiyakake visibilitas awal menyang wilayah apa wae sing mbutuhake perhatian lan bakal mbantu njamin pengalaman upgrade sing lancar. Kanggo informasi luwih lengkap ndeleng Hyperflex Health & Pre-Upgrade Check Tool TechNote kanggo instruksi lengkap babagan carane nginstal lan mbukak Hypercheck.

penting
Gunakake HX Connect UI nalika nganyarke saka versi HX Data Platform saiki 2.5(1a) utawa rilis mengko.

tata cara

Langkah 1
Yen UCSM (A-bundel) utawa UCS Server Firmware (C-bundel) upgrade dibutuhake, download Cisco UCS Infrastructure A, agul-agul mbendel B, lan rak mbendel C. Waca Ngundhuh Software kanggo rincian liyane.

Langkah 2
Priksa manawa saklar hulu hx-storage-data lan vMotion dikonfigurasi kanggo kapabilitas kegagalan jaringan lengkap sadurunge nerusake. Yen ora, HyperFlex Cluster dadi offline lan kabeh datastores unmount saka host ESXi. Waca Test Konektivitas Jaringan Hulu kanggo rincian liyane.

Langkah 3
Nganyarke Cisco UCS Infrastructure bundel minangka dibutuhake. Waca Nganyarke Cisco UCS Infrastructure Nggunakake Cisco UCS Manager kanggo rincian liyane.

Cathetan
Penting yen sampeyan nganyarke infrastruktur UCS kanthi manual dhisik sadurunge miwiti urutan upgrade komponen HyperFlex kaya sing kasebut ing Metode Nganyarke Disaranake, ing kaca 1. Fitur upgrade piranti lunak HX Platform ora bakal nganyarke bundel infrastruktur UCS. Nganyari iki minangka proses manual.

Langkah 4
Bootstrap kanggo upgrade Cisco HX Data Platform.

Cathetan
Yen sampeyan mbukak HyperFlex release 3.5 (1a) utawa mengko, sampeyan bisa nganyarke Cisco HX Data Platform dening nindakake proses otomatis bootstrap saka HX Connect UI (Proses Upgrade Bootstrap otomatis saka HX Connect UI). Nanging, yen sampeyan mbukak release HyperFlex sing sadurungé release 3.5 (1a) sampeyan kudu mbukak proses bootstrap manual kanggo upgrade Cisco HX Data Platform (Proses Upgrade Bootstrap Manual).

Langkah 5

Mlebu menyang HX Connect.

• Ketik alamat IP manajemen HX Storage Cluster ing browser. Navigasi menyang https://storage-cluster-management-ip.
• Ketik jeneng pangguna lan sandhi administratif.
• Klik Login.

Langkah 6
Ing panel Navigasi, pilih Nganyarke.

Langkah 7
Pilih jinis upgrade saka kaca Pilih Upgrade Type.

Ati-ati
Sawise bootstrap manual, validasi bakal gagal yen sampeyan mung nindakake UCS, mung ESXi, utawa upgrade gabungan UCS lan ESXi. Kanggo sukses upgrade, Cisco nyaranake jinis upgrade ing ngisor iki:

• HX Data Platform mung upgrade, ngiring dening UCS Firmware lan / utawa Hypervisor Software upgrade
• HX Data Platform lan UCS Firmware
• HX Data Platform lan Piranti Lunak Hypervisor
• Platform Data HX, Firmware UCS, lan Piranti Lunak Hypervisor.

Langkah 8
Gumantung ing jinis upgrade sing pengin ditindakake, ngrampungake kolom ing ngisor iki ing tab Ketik Kredensial.

UCS Server Firmware

lapangan	Informasi Penting
Jeneng Host Manager UCS lapangan	Ketik Cisco UCS Manager FQDN utawa alamat IP. Example: 10.193.211.120.
Jeneng pangguna lapangan	Ketik Cisco UCS Manager jeneng panganggo.
Sandi Admin lapangan	Ketik Cisco UCS Manager sandi.
Temokake tombol	Klik Temokake kanggo view ing paket firmware UCS saiki versi, ing Versi saiki lapangan.

Platform Data HX

Elemen UI	Informasi Penting
Seret HX file kene utawa klik kanggo browsing	Upload paling anyar Cisco HyperFlex Data Platform Upgrade Bundle kanggo upgrade kluster ana karo release.tgz sadurungé paket file saka Unduh Piranti Lunak - Platform Data HyperFlex HX. Sample file format jeneng: storfs-paket-3.5.2a-31601.tgz.
Versi saiki	Nampilake versi HyperFlex Data Platform saiki.
Rincian kluster saiki	Dhaptar rincian cluster HyperFlex kaya Versi HyperFlex lan Status upgrade cluster.
Versi bundle	Nampilake versi HyperFlex Data Platform saka bundel sing diunggah.
(Opsional) Checksum lapangan	Ing Nomer Checksum MD5 disimpen ing teks sing kapisah file ing /tmp direktori ngendi paket upgrade diundhuh. Iki minangka langkah opsional sing mbantu sampeyan verifikasi integritas paket upgrade sing diunggah.

ESXi

Cathetan
Opsi upgrade ESXi didhukung ing HyperFlex Connect UI kanggo release HyperFlex 3.5 (1a) utawa mengko.

Elemen UI	Informasi Penting
Seret ESXi file kene utawa klik kanggo browsing lapangan	Upload paling anyar Cisco HyperFlex Custom Image Offline Bundle kanggo upgrade ana ESXi sarwa dumadi saka Download Software – HyperFlex Platform Data HX. Example: HX-ESXi-6.5U2-10884925-Cisco-Custom-6.5.2.4-upgrade-bundle.zip.
Versi saiki lapangan	Nampilake versi ESXi saiki.
Rincian hypervisor saiki lapangan	Dhaptar rincian cluster HyperFlex kaya Versi Hypervisor lan Status upgrade cluster.
Rincian paket lapangan	Nampilake versi ESXi saka mbendel diunggahaké.

vCenter Kredensial

Elemen UI	Informasi Penting
Jeneng pangguna lapangan	Ketik vCenter jeneng panganggo.
Sandi Admin lapangan	Ketik vCenter sandi.

Langkah 9
Klik Upgrade kanggo miwiti proses upgrade cluster.

Langkah 10
Layar Validasi ing kaca Kemajuan Nganyarke nampilake kemajuan pamriksa sing ditindakake. Ndandani kesalahan validasi, yen ana. Konfirmasi yen upgrade wis rampung. Nalika upgrade lagi ditindakake, sampeyan bisa ndeleng pesen kesalahan, 'Websambungan soket gagal. Refresh otomatis dipatèni'. Sampeyan bisa uga refresh kaca utawa metu lan mlebu maneh kanggo mbusak pesen kesalahan. Sampeyan bisa nglirwakake pesen kesalahan iki kanthi aman. Sajrone upgrade kluster, yen simpul orkestra urip maneh utawa siklus daya amarga ana masalah daya, upgrade kluster bakal macet. Sawise simpul munggah, miwiti maneh proses upgrade cluster sawise ngresiki sistem cluster nggunakake printah ing ngisor iki:
upgrade cluster stcli –komponen hxdp –clean.

Yen printah ngresiki gagal, miwiti maneh layanan stMgr ing kabeh kontrol VMs (ctrlVM) kanthi nglakokake printah ing ngisor iki:
miwiti maneh stMgr

Banjur, ngresiki sistem kluster kanthi nglakokake maneh printah ing ngisor iki:
upgrade cluster stcli –komponen hxdp –clean

Punika minangkaampkode :

• root@ucs-stctlvm-385-1:~# stcli cluster upgrade –clean –komponen hxdp
• Peksa ngresiki munggah kemajuan upgrade
• root@ucs-stctlvm-385-1:~# stcli cluster upgrade –status
• Ora ana upgrade aktif ditemokake. Kemajuan upgrade kasedhiya sawise micu upgrade.

Post vCenter Upgrade Tugas

Yen ekstensi ora bisa digunakake, lan HyperFLex lan vCenter dianyari dadi versi sing kompatibel, tindakake langkah ing ngisor iki:

Cathetan
Yen sampeyan duwe luwih saka siji kluster HyperFlex, mula sampeyan kudu nganyari kabeh kluster HX dhisik menyang versi HX sing kompatibel kanggo versi vCenter sing cocog sadurunge nyoba ndaftar maneh. Aja batal registrasi
com.springpath.sysmgmt kajaba kabeh kluster dibusak saka vCenter.

Sadurunge miwiti

Verifikasi ekstensi bisa digunakake. Yen mangkono, mula ora perlu nindakake tugas sawise nganyarke.

tata cara

Langkah 1
Coba ndhaptar maneh ekstensi kasebut. Yen extension isih ora bisa, banjur nerusake karo langkah sabanjure.

Langkah 1
Mbusak registrasi ekstensi.

Example:
com.spring path.sysmgmt.domain-
com.spring path.sysmgmt Gunakake browser mob https:// /mob (konten> path manager extension lan Invoke UnregisterExtension method).

Cathetan
Disaranake mbusak kluster sadurunge mbatalake ekstensi.

Langkah 3
Dhaptar maneh plug-in Springpath nggunakake:

Example:
stcli cluster reregister

Cathetan
Sampeyan bisa nggunakake reregister kluster stcli --kanggo bantuan banjur nerusake registrasi maneh.

Alur Kerja Proses Nganyarke Online

manungsa waé
Yen sampeyan mbukak HyperFlex release 3.5 (1a) utawa mengko, sampeyan bisa nganyarke Cisco HX Data Platform dening nindakake proses otomatis bootstrap saka HX Connect UI (Proses Upgrade Bootstrap otomatis saka HX Connect UI). Nanging, yen sampeyan mbukak release HyperFlex sing sadurungé release 3.5 (1a) sampeyan kudu mbukak proses bootstrap manual kanggo upgrade Cisco HX Data Platform (Proses Upgrade Bootstrap Manual).

Nalika nggunakake alur kerja proses upgrade online, nimbang ing ngisor iki:

• Pisanan, upgrade infrastruktur Cisco UCS kanggo versi paling anyar lan banjur nggunakake alur kerja upgrade otomatis kanggo upgrade gabungan saka perangkat kukuh Cisco UCS lan Cisco HX Data Platform. Nganyarke online nggunakake paket perangkat kukuh inang kanggo nganyarke kabeh titik pungkasan server.
• Sajrone upgrade online, amarga siji simpul lagi dianyari (dilebokake menyang mode pangopènan), jumlah kegagalan simpul sing ditoleransi dikurangi adhedhasar Faktor Replikasi Data lan setelan Kebijakan Akses. Waca Ketik Cisco HyperFlex Maintenance Mode kanggo tata cara carane ngakses Cisco HyperFlex Maintenance Mode.
• Yen nganyarke perangkat kukuh HXDP lan UCS, upgrade gabungan bisa dipilih liwat HX Connect gumantung saka dawa jendhela pangopènan.
• Aja nggunakake browser Firefox. Ora didhukung amarga versi lampu kilat lawas sing dibundel karo browser.

Cathetan
Nganyarke infrastruktur Cisco UCS Manager mung didhukung nggunakake AutoInstall lan upgrade perangkat kukuh server langsung kudu ditindakake mung liwat kerangka orkestrasi upgrade sing diwenehake dening HX Data Platform Plug-in.

Cathetan
Sajrone proses upgrade online, aja ngakoni aktivitas urip maneh server sing ditundha saka UCS Manager. Mengkono bakal ngganggu proses upgrade lan bisa nimbulaké ou panyimpenantage. HyperFlex bakal kanthi otomatis urip maneh saben simpul.

Tabel ing ngisor iki ngringkes alur kerja upgrade online:

Langkah	Katrangan	Referensi
1.	Yen UCSM (A-bundel) utawa UCS Server Firmware (C-bundle) upgrade dibutuhake, download Cisco UCS Infrastructure A, blade bundle B, lan rak bundle C.	Ngundhuh Piranti Lunak
2.	Priksa manawa ing hx-panyimpenan-data lan vGerak ngalih hulu diatur kanggo failover jaringan lengkap kemampuan sadurunge nerusake. Yen ora, HyperFlex Cluster dadi offline lan kabeh datastores unmount saka host ESXi.	Uji Konektivitas Jaringan Hulu
3.	Nganyarke Cisco UCS Infrastructure bundel minangka dibutuhake. Cathetan          Penting sampeyan nganyarke infrastruktur UCS kanthi manual sadurunge miwiti urutan upgrade HyperFlex komponen minangka mbatesi ing Dianjurake Cara Nganyarke, ing kaca 1 . Fitur upgrade piranti lunak HX Platform ora bakal nganyarke bundel infrastruktur UCS. Nganyari iki minangka proses manual.	Nganyarke Cisco UCS Infrastruktur Nggunakake Cisco UCS Manager

Langkah	Katrangan	Referensi
4.	Bootstrap kanggo upgrade Cisco HX Data Platform.	HX Rilis 3.5(1a) lan luwih anyar: • Bootstrap otomatis didhukung diwiwiti karo release HX 3.5(1a). Auto Bootstrap Proses Nganyarke saka HX Connect UI   HX Rilis sadurungé saka 3.5(1a): • Manual cluster bootstrap dibutuhake HX release sadurungé saka 3.5 (1a). Proses Nganyarke Bootstrap Manual
5.	Pateni jadwal gambar asli seko, ing bootstrapped panyimpenan controller VM. Cathetan          Iku cukup kanggo mbukak script iki ing salah siji saka kelenjar controller.	Jalanake perintah stcli snapshot-schedule -disable.
6.	Mlebu menyang HX Connect karo kredensial administrator.
7.	Miwiti upgrade gabungan saka: • HX Data Platform lan UCS Firmware • Platform Data HX lan Piranti Lunak Hypervisor	Nganyarke HyperFlex Cluster Panjenengan Nggunakake HX Connect UI, ing kaca 2
	manungsa waé Kanggo nindakake upgrade pamisah, sampeyan kudu nganyarke Platform Data HX dhisik. Sawise HX Data Platform wis nganyari kanggo 3.5 (1x), sampeyan bisa nindakake upgrade pamisah mung UCSM lan / utawa ESXi mung. Nalika mung perangkat kukuh UCS lagi nganyari, sampeyan bisa ndeleng proses upgrade ngaso ing layar validasi sawise panemuan interconnect kain. Iki bisa uga dadi masalah kegagalan panyambungan jaringan, nanging ing umume kasus, mung kudu ngenteni proses rampung.	Nganyarke Cisco HyperFlex Data Platform Nggunakake HX Connect Nganyarke Cisco UCS Server Firmware Nggunakake HX Connect UI Nganyarke ESXi Nggunakake HX Sambungake UI
8.	Konfirmasi yen tugas upgrade wis rampung.	Post Upgrade Tugas
9.	Nggawe sertifikat dinamis.	Diwiwiti karo rilis 4.0(2a), sertifikat sing ditandatangani dhewe dinamis digawe tinimbang statis. sertifikat.
10.	Ing VM pengontrol sing padha, aktifake jadwal snapshot.	Jalanake perintah stcli snapshot-schedule -–enable.

Alur Kerja Proses Nganyarke Offline

Tabel ing ngisor iki ngringkes alur kerja upgrade offline:

Langkah	Katrangan	Referensi
1.	Yen upgrade UCSM (A-bundle) utawa UCS Server Firmware (C-bundle), download Cisco UCS Infrastructure A, blade bundle B, lan rak bundle C.	Ngundhuh Piranti Lunak
2.	Priksa manawa ing hx-panyimpenan-data lan vGerak ngalih hulu dikonfigurasi kanggo kapabilitas gagal jaringan lengkap sadurunge nerusake maju. Yen ora, HyperFlex Cluster dadi offline lan kabeh datastores unmount saka host ESXi.	Uji Konektivitas Jaringan Hulu
3.	Nganyarke Cisco UCS Infrastructure bundel minangka dibutuhake. Cathetan          Sing penting kowe nganyarke infrastruktur UCS kanthi manual sadurunge miwiti urutan nganyarke komponen HyperFlex kaya sing digarisake ing Dianjurake Nganyarke Metode, ing kaca 1. Fitur upgrade piranti lunak HX Platform ora bakal nganyarke bundel infrastruktur UCS. Nganyari iki minangka proses manual.	Nganyarke Cisco UCS Infrastruktur Nggunakake Cisco UCS Manager

Langkah	Katrangan	Referensi
4.	Bukak vSphere Web Klien lan mateni kabeh VM pangguna manggon ing server HX lan kabeh pangguna VM sing mlaku ing HX datastores. Iki kalebu VM sing mlaku ing simpul mung komputer. Sawise VM wis dipateni, verifikasi kahanan kesehatan kluster lan mateni kanthi apik. penting Kontrol HyperFlex VM (stCtlVMs) kudu tetep aktif.	Pateni Anggun saka Kluster HX
5.	Kanthi manual stage versi perangkat kukuh sing bener sadurunge miwiti proses upgrade.	Ngowahi Paket Firmware Host Nggunakake Cisco UCS Manager
6.	Matikan HyperFlex Controller VMs (stCtlVMs).	Ing vCenter, klik-tengen ing saben HX Controller VM (stCtlVM) banjur pilih daya > Mati OS Tamu.
7.	Sawise VM Controller dipateni, pasang host ESXi menyang Mode Pangopènan.	Ing vCenter, klik-tengen ing saben host ESXi pilih Mode pangopènan > Ketik Mode Pangopènan.
8.	Ngakoni urip maneh sing ditundha ing server sing kalebu simpul kluster HX, kalebu simpul konvergen lan simpul mung komputer sing disambungake menyang kluster. Enteni nganti kabeh simpul dianyari. Konfirmasi manawa paket perangkat kukuh sing bener wis diinstal sadurunge nerusake.
9.	Sawise sarwa dumadi ESXi wis booted, njupuk wong metu saka Maintenance Mode. Saiki controller VM kudu bali online.	Ing vCenter, klik-tengen ing saben host ESXi pilih Pangopènan Mode > Metu Mode Pangopènan.

Langkah	Katrangan	Referensi
10.	Bootstrap kanggo upgrade Cisco HX Data Platform Plug-in. penting       • Dadi manawa kanggo nyalin bootstrap file menyang controller VM /tmp direktori. • Priksa manawa sampeyan konfirmasi versi plug-in ing vCenter Administrasi > Plug-In Klien kaca.	Proses Nganyarke Bootstrap Manual
11.	Pateni jadwal snapshot, ing controller panyimpenan bootstrapped VM. Cathetan          Iku cukup kanggo mbukak iki script ing salah siji simpul controller.	Jalanake perintah stcli snapshot-schedule -disable.
12.	Saka VM controller padha, miwiti upgrade.	Nganyarke HyperFlex Cluster Panjenengan Nggunakake HX Connect UI, ing kaca 2 Nganyarke Offline Nggunakake CLI, ing kaca 11
13.	Konfirmasi yen upgrade wis rampung.	Post Upgrade Tugas
14.	Sawise upgrade rampung, miwiti kluster lan daya ing VMs.	Miwiti Cluster lan Power On VMs, ing kaca 12
15.	Ing VM pengontrol sing padha, aktifake jadwal snapshot.	Jalanake perintah stcli snapshot-schedule -–enable.

Pedoman Nganyarke Offline

penting

Parameter ucsm-host lan ucsm-user dibutuhake nalika sampeyan nganyarke saka 1.7x dadi 1.8x. Paramèter iki ora kudu digunakake nalika pindhah saka 1.8 (1a) / 1.8 (1b) kanggo 2.0 (1a) amarga kita ora ngganti versi perangkat kukuh server Cisco UCS. Cisco nyaranake nggunakake HX Connect UI kanggo upgrade HyperFlex kluster liwat CLI kanggo ease saka nggunakake lan laporan luwih. Sampeyan bisa nglirwakake tandha Cluster Invalid State kanthi aman ing HX Connect.

Sadurunge nerusake, kanthi upgrade gabungan utawa pamisah, nimbang pedoman ing ngisor iki:

• Jeneng paket kudu cocog karo file sing diunggah menyang controller VM.
• Ketik sandhi nalika dijaluk.
• Node dianyari karo versi anyar saka piranti lunak Cisco HX Data Platform lan urip maneh siji-sijine.
• Nganyarke cluster offline karo vCenter nested ora didhukung.

Nganyarke Offline Nggunakake CLI

penting
Yen sampeyan kudu nindakake upgrade pamisah, sampeyan kudu nganyarke Platform Data HX dhisik. Sawise HX Data Platform nganyari kanggo Release 3.5 (1x), sampeyan bisa nindakake upgrade pamisah mung UCSM lan / utawa ESXi.

Upgrade Gabungan Cisco HX Data Platform, ESXi lan Cisco UCS Firmware

M5 Server
upgrade cluster stcli –komponen ucs-fw, hxdp, hypervisor –location/tmp/ -ucsm-host ucsm-user -ucsm5-fw-versi

Example kanggo Server M5:
~# stcli cluster upgrade –komponen ucs-fw, hxdp, hypervisor –location /tmp/storfs-packages-3.5.1a-19712.tgz –ucsm-host eng-fi16.eng.storvisor.com –ucsm-user admin –ucs5fw -versi '3.1 (2g)'

M4 Server
# upgrade cluster stcli –komponen ucs-fw, hxdp, hypervisor –location/tmp/ -ucsm-host -ucsm-pangguna –ucsfw-versi

Example kanggo Server M4:
~# upgrade kluster stcli –komponen ucs-fw, hxdp, hypervisor –lokasi
/tmp/storfs-packages-3.5.1a-19712.tgz
–ucsm-host eng-fi16.eng.storvisor.com –ucsm-user admin –ucsfw-version '3.1(2g)'

Gabungan Upgrade Cisco HX Data Platform lan ESXi

M5 Server
upgrade kluster stcli –komponen hxdp,hypervisor –lokasi /tmp/hxupgrade_bundle.tgz –hypervisor-bundle /tmp/esxiupgrade_bundle.zip

Example kanggo Server M5:
upgrade kluster stcli –komponen hxdp,hypervisor –lokasi /tmp/hxupgrade_bundle.tgz

• hypervisor-bundle /tmp/esxiupgrade_bundle.zip

M4 Server
# upgrade kluster stcli –komponen hxdp,hypervisor –lokasi /tmp/hxupgrade_bundle.tgz –hypervisor-bundle /tmp/esxiupgrade_bundle.zip

Example kanggo Server M4:

~# upgrade kluster stcli –komponen hxdp,hypervisor –lokasi /tmp/hxupgrade_bundle.tgz

• hypervisor-bundle /tmp/esxiupgrade_bundle.zip

Gabungan Upgrade Cisco HX Data Platform lan Cisco UCS Firmware

M5 Server
# stcli cluster upgrade –komponen hxdp,ucs-fw –location/tmp/ -vcenter-user -ucsm-host -ucsm-pangguna -ucsm5-fw-versi

M4 Server
# stcli cluster upgrade –komponen hxdp,ucs-fw –location/tmp/ -vcenter-user -ucsm-host -ucsm-pangguna -versi ucsfw

Example kanggo Server M4:
~# stcli cluster upgrade –komponen hxdp,ucs-fw –location /tmp/storfs-packages-1.8.1c-19712.tgz –vcenter-user administrator@vsphere.local –ucsm-host eng-fi16.eng.storvisor.com –ucsm-user admin –ucsfw-version '3.1(2b)'.

Miwiti Cluster lan Power On VMs

Sawise upgrade rampung lan kluster wis nganyari, metu lan mlebu maneh menyang vCenter kanggo ndeleng owah-owahan upgrade.

 tata cara

Langkah 1
Sawise upgrade rampung, miwiti kluster.

Langkah 2
Mlebet menyang VM pengontrol apa wae liwat SSH.
# stcli cluster wiwitan

Example:
HyperFlex StorageController 1.8 (1c) Mlebet pungkasan: Wed 21 September 23:54:23 2016 saka pguo-dev.eng.storvisor.com root@ucs-stclivm - 384 -1;~# stcli cluster upgrade-status Cluster upgrade kasil. Versi kluster: 1.8(1c) root@ucs-stctlvm-384;~# kluster stcli wiwit ngenteni Kluster diwiwiti ing simpul: [ucs-383, ucs-384, ucs-385, ucs-386]

Iki bakal miwiti kluster lan masang datastores HX. Ngenteni kluster teka online. Sampeyan bakal weruh pituduh:
Miwiti kluster ing simpul; [ucs-383, ucs-384, ucs-385, ucs-386] Kluster online root@ucs-stctlvm-384-1;~#.

Langkah 3
Enteni kluster dadi sehat sadurunge miwiti VM. Run printah:
~# stcli cluster info| kesehatan grep

Example:
root@SpringpathControllerZRVF040451;~# stcli cluster info | negara kesehatan grep: sehat.

negara: sehat
cluster panyimpenan sehat

Langkah 4
Sawise kluster sehat, bukak vSphere Web Klien utawa Klien Tebal, navigasi menyang Hosts and Cluster > Datacenter > Cluster > . Klik kanan, pilih Power > Power On to start the VMs.

Dokumen / Sumber Daya

cisco HyperFlex Hyper Converged Infrastructure [pdf] Pandhuan HyperFlex, Infrastruktur Konvergen Hyper, Infrastruktur Konvergen, HyperFlex, Infrastruktur

Referensi

• Manual pangguna