JUNIPER SYSTEMS MS4W Series Mesa 4 Rugged Tablet
Product Specifications
- Product Name: Non-incendive Mesa 4 Rugged Tablet
- Manufacturer: Juniper Systems, Inc.
- Approval: Met Labs approved NonIncendive Class I, II, III Division 2
- Conformance:
- UL Std. 121201 and UL Std.62368-1
- Cert. to CSA Std. C22.2#213 and CSA Std. C22.2#62368-1
- Model: MS4W Series
- Usage: Hazardous locations with ignitable concentrations under unusual circumstances
- Battery Pack: Excell Battery 2EXL7540 (JSPN 28000)
Product Usage Instructions
Warnings:
- Do not change or charge batteries.
- Do not insert or remove cards.
- Do not connect or disconnect any device or cable.
Usage in Hazardous Locations:
In hazardous locations, ensure the battery door is in place at all times.
Safety Document:
Refer to the provided safety document to learn how to safely operate the non-incendive Mesa 4 Rugged Tablet in potentially hazardous locations.
Note: The full Mesa 4 User Manual is available on the Mesa 4 device and on the manufacturer’s website at www.junipersys.com/support/mesa-4/documentation.
Frequently Asked Questions (FAQ)
- Q: Can I use any battery pack with the Mesa 4 Rugged Tablet?
A: No, only approved battery packs like Excell Battery 2EXL7540 (JSPN 28000) should be used with the Mesa 4 Rugged Tablet. - Q: What should I do if I need to change the battery?
A: Contact the manufacturer or refer to the user manual for instructions on safely changing the battery of the Mesa 4 Rugged Tablet.
Non-incendive Mesa 4 Rugged Tablet
Non-incendive Approval
The non-incendive Mesa 4 Rugged Tablet™ from Juniper Systems, Inc. is Met Labs approved Non-Incendive Class I, II, III Division 2.
Conforms to UL
- Std. 121201 and UL
- Std.62368-1
- Cert. to CSA Std.
- C22.2#213 and CSA Std.
- C22.2#62368-1
The non-incendive Mesa 4 (model MS4W Series) may be used in hazardous locations where ignitable concentrations of flammable gases, vapors, or liquids are not part of the normal environment but can become so under unusual circumstances.
Read this Document
Read this document to learn how to safely operate the non-incendive Mesa 4 Rugged Tablet in potentially hazardous locations.
This addendum is a supplement to the Mesa 4 User Manual.
Note: The Mesa 4 User Manual is available on the Mesa 4 and on our website at www.junipersys.com/support/mesa-4/documentation.
Battery Pack
Only use approved battery packs: Excell Battery 2EXL7540 (JSPN 28000).
Using the Mesa 4 Rugged Tablet in a Hazardous Location
The rules (warnings) that follow must be followed to maintain the Intertek Laboratory approved non-incendive standard and to prevent the possibility of serious injury.
WARNING – EXPLOSION HAZARD – In Hazardous Locations:
- Do not dock the Mesa 4.
- Do not change or charge batteries.
- Do not insert or remove cards.
- Do not connect or disconnect any device or cable.
In hazardous locations, the battery door must be in place as indicated below.
Avertissement
WARNING – EXPLOSION HAZARD – Servicing:
Substitution of components may impair suitability for Class I, II, III Division 2.
© Copyright Juniper Systems 09Oct2024. All rights reserved. All trademarks are registered or recognized by its respective owners. Specifications are subject to change without notice. JSPN 31295-01 • 435.753.1881 • 1132 W 1700 N • Logan, UT 84321 USA • junipersys.com
Documents / Resources
 |
JUNIPER SYSTEMS MS4W Series Mesa 4 Rugged Tablet [pdf] Owner's Manual MS4W Series, MS4W Series Mesa 4 Rugged Tablet, Mesa 4 Rugged Tablet, Tablet |
 |
JUNIPER SYSTEMS MS4W Series Mesa 4 Rugged Tablet [pdf] Instruction Manual MS4W Series, MS4W Series Mesa 4 Rugged Tablet, Mesa 4 Rugged Tablet, Rugged Tablet, Tablet |
