Owner's Manual for JUNIPER SYSTEMS models including: MS4W Series, MS4W Series Mesa 4 Rugged Tablet, Mesa 4 Rugged Tablet, Tablet
Manuals for Mesa 4 Windows
File Info : application/pdf, 1 Pages, 205.73KB
DocumentDocumentNon-incendive Mesa 4 Rugged Tablet Non-incendive Approval The non-incendive Mesa 4 Rugged TabletTM from Juniper Systems, Inc. is Met Labs approved NonIncendive Class I, II, III Division 2. Conforms to UL Std. 121201 and UL Std.62368-1 Cert. to CSA Std. C22.2#213 and CSA Std. C22.2#62368-1 The non-incendive Mesa 4 (model MS4W Series) may be used in hazardous locations where ignitable concentrations of flammable gases, vapors, or liquids are not part of the normal environment but can become so under unusual circumstances. Using the Mesa 4 Rugged Tablet in a Hazardous Location The rules (warnings) that follow must be followed to maintain the Intertek Laboratory approved non-incendive standard and to prevent the possibility of serious injury. WARNING EXPLOSION HAZARD In Hazardous Locations: Do not dock the Mesa 4. Do not change or charge batteries. Do not insert or remove cards. Do not connect or disconnect any device or cable. In hazardous locations, the battery door must be in place as indicated below. Read this Document Read this document to learn how to safely operate the non-incendive Mesa 4 Rugged Tablet in potentially hazardous locations. This addendum is a supplement to the Mesa 4 User Manual. Note: The Mesa 4 User Manual is available on the Mesa 4 and on our website at www.junipersys.com/support/ mesa-4/documentation. Battery Pack Only use approved battery packs: Excell Battery 2EXL7540 (JSPN 28000). Avertissement Risque D'Explosion Dans des zones dangereuses: N'amarrez pas l'unité, ne changez pas et ne chargez pas les batteries, n'insérez et ne retirez pas de cartes et n'établissez ni ne rompez aucune connexion. Les caches de protection des ports et des batteries doivent toujours rester installés. WARNING EXPLOSION HAZARD Servicing: Substitution of components may impair suitability for Class I, II, III Division 2. Avertissement Risque D'Explosion La substitutiond e composantsp eutr endre ce materiel inacceptable pour les emplacements de Class I, II, III Division 2. © Copyright Juniper Systems 09Oct2024. All rights reserved. All trademarks are registered or recognized by its respective owners. Specifications are subject to change without notice. JSPN 31295-01 · 435.753.1881 · 1132 W 1700 N · Logan, UT 84321 USA · junipersys.com