JONSBO - logoC6-ITX
User Manual

Package Content

Image Q’ty

Used for

JONSBO C6 ITX Micro ATX Mesh Case - icon

12

Screw – PSU, MB, HDD,

JONSBO C6 ITX Micro ATX Mesh Case - icon1

12

Washer

JONSBO C6 ITX Micro ATX Mesh Case - icon2

4

Screw – SSD

JONSBO C6 ITX Micro ATX Mesh Case - icon3

5

Cable tie

JONSBO C6 ITX Micro ATX Mesh Case - icon4

12

Fan Screw

JONSBO C6 ITX Micro ATX Mesh Case - icon5

1

Braided handles

Connectors

USB 3.0 HD AUDIO
JONSBO C6 ITX Micro ATX Mesh Case - icon6 JONSBO C6 ITX Micro ATX Mesh Case - icon7
F_PANEL
JONSBO C6 ITX Micro ATX Mesh Case - icon8
The connector diagram only shows the line sequence reltionship. Please refer to the actual product for functions

Parts Diagram

JONSBO C6 ITX Micro ATX Mesh Case -

Parts
1 Main Chassis
2 Power stand
3 Top Mesh Panel
4 PCI slot bracket
5 Handles
6 Right Mesh Panel
7 Front Mesh Panel
8 Bottom filter
9 Foot base
10 PCIE cover
11 Left Mesh Panel

Installation Guide

  1. Disassemble the stencil before installing the hardware
    JONSBO C6 ITX Micro ATX Mesh Case -panel
    1. Press the button on the rear panel of the chassis to open the top panel.
    2.Push the side panel and front panel out of the inside of the case.
  2. Before installation, please also remove all the multi-functional brackets
    JONSBO C6 ITX Micro ATX Mesh Case -panel1
    Remove the multi-functional brackets
  3. Motherboard Installation
    JONSBO C6 ITX Micro ATX Mesh Case -panel2The motherboard is placed into the chassis and locked with screws.
  4. PSU installation
    JONSBO C6 ITX Micro ATX Mesh Case -panel3
    1.Remove the power rack.
    2.The SFX power supply i installed on the bracket vith screws.
    3 When instaling the ATX powier supply, firt break offthe SFX half-piece, and then instll the power Supply:
  5. Fan bracket installation
    JONSBO C6 ITX Micro ATX Mesh Case -panel4
    1. Assemble the top fan and bracket and install them into the chassis
    2. Top 120mm”L, rear panel 120mm1, bottom panel 120mm”1
  6. Storage device installation
    JONSBO C6 ITX Micro ATX Mesh Case -panel5
    The hard disk is installed on the bottom plate, and the mounting holes are locked with screws.
    The 3.5HDD hard drive and fan share the same installation location.
  7. Graphics card installation
    JONSBO C6 ITX Micro ATX Mesh Case -panel6
    1. Remove the PCI cover and PCI-E card strip.
    2. Insert the graphics card into the motherboard card slot and lock it with a screw.
  8. Mesh panelinstallation
    JONSBO C6 ITX Micro ATX Mesh Case -panel7
    Install the mesh panels
  9. Strap Handle installation
    JONSBO C6 ITX Micro ATX Mesh Case -panel8
    Strap Handle installation

Dongguan Sibositong Industrial Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China
©2023 Dongguan Sibositong Industrial Co., Ltd. Al right reserved. Specifications are subject to
change without prior notice. Some trademark may be claimed s the property of others.

Documents / Resources

JONSBO C6-ITX Micro ATX Mesh Case [pdf] User Manual
C6-ITX, C6-ITX Micro ATX Mesh Case, Micro ATX Mesh Case, ATX Mesh Case, Case

References

Leave a comment

Your email address will not be published. Required fields are marked *