jONSBO C6 PC Case User Manual

jONSBO-C6-PC-Case-logo

jONSBO C6 PC Case

jONSBO-C6-PC-Case-product

Package ContentjONSBO-C6-PC-Case-fig-11

ConnectorsjONSBO-C6-PC-Case-fig-1

Parts DiagramjONSBO-C6-PC-Case-fig-2

Parts

  • Top Mesh Panel
  • Right Mesh Panel
  • Left Mesh Panel
  • Front Mesh Panel
  • PCI slot Cover
  • PCI slot bracket
  • Main Chassis

PSU installationjONSBO-C6-PC-Case-fig-3

  1. Press the button on the rear panel of the chassis to open the top panel.
  2. push the side panel and front panel out of the inside of the case.

Before installation, please also remove alljONSBO-C6-PC-Case-fig-4

  • Remove the multi-functional brackets

Motherboard Installation
Insert the MB diagonally through the front case into the case, secure with screwsjONSBO-C6-PC-Case-fig-5

Motherboard InstallationjONSBO-C6-PC-Case-fig-6

  1. Remove PCI slot cover, and PCI slot brackets
  2. Insert the graphics card to MB slot, secure with screw

Fan bracket installationjONSBO-C6-PC-Case-fig-7

  1. Install the fan brackets to the fan
  2. Insert the fan assembly into the chassis, and secure.

Storage device installation
2.5″ SSD or 3.5″ HDD install on the multi-functional brackets, and than mount on the corresponding mounting pointsjONSBO-C6-PC-Case-fig-8

PSU installationjONSBO-C6-PC-Case-fig-9

  1. Connect all the cables before mounting the PSU into the case
  2. Put the PSU on the mounting area and fix it with screws

Mesh panel installationjONSBO-C6-PC-Case-fig-10

  • Install the mesh panels

2022 JONSBO Technology Co., Ltd. All right reserved. Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others.

Documents / Resources

PDF thumbnailC6 PC Case
User Manual · C6 PC Case, C6, PC Case, Case

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. How do you connect the fan to the base of the frame?

    Unwanted Life asks How do you connect the fan to the base of the frame?
    Manuals+ clarified question
    Question

    How do I install a fan at the bottom of the JONSBO C6 case?

    Answer

    To install a fan at the base (bottom) of the JONSBO C6 frame, follow these steps based on the Fan Bracket Installation section of the manual:

    • Prepare the Fan: Attach the fan brackets to your fan first. Use the provided fan screws (labeled 'H' in the package content list) to secure the brackets to the fan.
    • Mount to Chassis: Once the brackets are attached to the fan, insert the entire fan assembly into the bottom of the chassis.
    • Secure: Secure the assembly to the frame to ensure it is stable.

    The case supports either 120mm or 140mm fans at the bottom. Note that you may need to remove the multi-functional brackets first if they are currently installed in that area.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.