ITC 69641 Vertical Nav Light

PARTS / TOOLS NEEDED

Safety Instructions

• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not install any luminaire assembly closer than 6” from any combustible materials.
• Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
• All electrical connections should be made inside a watertight junction box

DIMENSION

1. Remove bezel if not already disassembled.
2. Determine the installation location for your light. Once determined drill a 0.5” hole.
3. Connect wires to power source.
4. Feed wires back through the hole and screw the light in place using the screws provided.
5. Reattach bezel.

3030 Corporate Grove Dr. Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com

For warranty information please visit www.itc-us.com/warranty-return-policy
Rev A • 11/02/22

Documents / Resources

ITC 69641 Vertical Nav Light [pdf] Instruction Manual 69641 Vertical Nav Light, 69641, 69641 Light, Vertical Nav Light, Nav Light, Vertical Light, Light

References

• User Manual