ITC Ace Courtesy Light Instruction Manual
|
PARTS / TOOLS NEEDED: |
|||
|
|
|
|
|
| Ace Courtesy Light | Bezel | Power Drill (not provided) | Screws (2) |
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not install any luminaire assembly closer than 6” from any combustible materials.
- Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
Assembly Instruction
- Drill a hole in the customer provided mounting surface.
Feed the wires into the hole, and mark the location of the screw holes. (Pre-drill)
- Attach the light using the provided screws.
- Snap the bezel onto the light. Face the slit towards the surface you would like the light to focus on.
- Follow the wiring diagram below to wire the light to your system.
Single Color Wiring
RGBW Wiring
*If installing an RGB version the light will not have a white wire.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Documents / Resources
 |
ITC Ace Courtesy Light [pdf] Instruction Manual Ace Courtesy Light, Ace Light, Courtesy Light, Light, 696AX-SS-KK |
