iTC 69641 Vertical Mount LED Navigation Light 
Product Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not use in damp or wet locations unless specified otherwise.
- Do not install any luminaire assembly closer than 6″ from any curtain or other combustible material.
SERVICE
There are no user-serviceable parts inside. Opening unit will void warranty.
WARRANTY
For information on our warranty policy please visit our website at http://www.itc-marine.com/resources/warranty/
Installation Instructions
Step 1: Remove bezel if not already disassembled.
Step 2: Determine the installation location for your light. Once determined drill a 0.5” hole.
Step 3: Connect wires to power source.
Step 4: Feed wires back through the hole and screw the light in place using the screws provided. Step 5: Reattach bezel.
**All electrical connections should be made inside a watertight junction box.
230 E. Lakewood Blvd.
- P.O. Box 8338
- Holland, MI
- 49422-8338
- Phone: 616-396-1355
- Fax: 616-396-1152
- www.itc-us.com
- sales@itc-us.com Revision Date: 01/26/22
Documents / Resources
 |
iTC 69641 Vertical Mount LED Navigation Light [pdf] Instruction Manual 69641 Vertical Mount LED Navigation Light, 69641, Vertical Mount LED Navigation Light |
