Motorola Pulse Escape Bluetooth Headphones

At a Glance

Model: Pulse Escape Bluetooth headphones

Frequency Band: 2.402 – 2.480 GHz

Maximum RF power: 3.36 dBm

Product ID: SH012

FCC ID: VLJ-SH012

IC: 4522A-SH012

Bluetooth ID: D034992

Working temperature: 0 °C to 45 °C

Key Components:

• Power Switch
• Aux-in Port
• Status Light
• Microphone (MIC)
• Charging Port (Micro USB)
• Volume Down Button
• Play/Pause Button
• Volume Up Button

Note: Fully charge before use. Attempting to remove or replace the battery will damage the headset.

Charging and Powering On

Charging: Before first use, charge the headphones until the status light turns blue.

The device can be powered through a micro USB from any CE compliant power source.

(Wall charger not included)

Powering On: Turn the headset on by pressing and holding the power button for 2 seconds.

Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used product properly.

Note: The battery should only be removed by a recycling facility. Any attempt to remove or replace the battery will damage the product and void your warranty.

Connect and Go

Enable Bluetooth: Turn on Bluetooth on your device.

Pairing:

• Turn the headset on (charge before use). The status light will flash blue/red rapidly.
• Go to your device's Bluetooth settings and pair with 'Pulse Escape'.

Button Operations

Music Controls:

• Play/Pause: Press the Play/Pause button.
• Volume Down/Up: Press the Volume Down or Volume Up button.
• Previous/Next Track: Long press the Volume Down or Volume Up button.

Call Controls:

• Answer/End Call: Press the Play/Pause button.
• Reject Call: Long press the Play/Pause button.
• Mute during call: Double press the Play/Pause button.
• Redial last call: Double press the Play/Pause button.

Voice Commands:

• Issue a voice command: Double press the Play/Pause button in idle mode, then speak your command.

Pairing Management:

• Clear Pair List: Long press the Volume Down and Volume Up buttons simultaneously.
• Battery Level Check: Press and hold the Volume Up button.

General Information and Warranty

For troubleshooting, consult the User's Guide or contact Customer Service.

Contact:

• Email: support@motorolahome.com
• Web: www.motorolahome.com/support

This product is manufactured under license by Binatone Electronics International LTD. The warranty covers defects in materials and workmanship under normal consumer usage for a specified period (typically 2 years for products, 90 days for accessories). It excludes normal wear and tear, misuse, unauthorized service, and non-Motorola accessories.

For full details on your rights, consult your country's laws.

Environmental Disposal

Do not dispose of this product with normal household waste. Take it to a collection point for the recycling of electrical and electronic equipment. This is indicated by the symbol on the product, user's guide, or box. Reusing parts or raw materials contributes to environmental protection.

Compliance Information

This product complies with EU directives such as 2014/53/EU. The Declaration of Conformity can be obtained from the full user guide at www.motorolahome.com.

Manufactured by: Binatone Telecom Plc, 1 Apsley Way, London NW2 7HF

Imported by: Binatone Communications Europe, Bosstraat 54/4, 3560 Lummen, Belgium

© 2017 Motorola Mobility LLC. All rights reserved.