Motorola Motobuds Charge SH067: Quick Start Guide
Product Information
Brand: Motorola
Model: Motobuds Charge SH067
Model Number: SH067
FCC ID: VLI-SH067
IC: 4522A-SH067
Frequency Band: 2.402 - 2.480GHz
Working Temperature: -10°C to 45°C
Manufacturer: Binatone Telecom Plc
1. Charging
Description: Fully charge the earbuds before first use. The charging case can be powered via a micro USB cable from any CE compliant power source.
Diagram: A USB-C cable connects the charging case to a power source. The earbuds are shown placed inside the case, with battery level indicators depicted.
Action: Use a micro USB cable ? to connect the charging case to a power source. The earbuds should be placed inside the case for charging ?.
2. Pairing
Description: Ensure both earbuds are inside the charging case. Remove both earbuds; they will flash blue and red ??, indicating they are in pairing mode.
Diagram: Shows earbuds being removed from the charging case.
Action: On your smartphone, select "Motobuds Charge" from the Bluetooth menu ? to connect.
3. Fitting
Description: For the best fit and audio experience, try different earbud sizes (L, M, S).
Diagram: Displays different ear tip sizes (Large, Medium, Small). Demonstrates the correct insertion and rotational adjustment of the earbud in the ear canal for a secure fit.
Action: Insert the Motobuds into your ear and rotate gently until they fit comfortably and securely.
4. Basic Operation
The Multi-Function Button (MFB) on each earbud controls various functions.
Diagram: Icons represent Multi-Function Button [MFB] controls:
- [Power Symbol] / [Play/Pause Symbol] ▶️⏸️: Power On/Off, Play/Pause Music, Answer/End Call ?
- [Next Track Symbol] ⏭️: Next Track, Reject Call ??
- [Previous Track Symbol] ⏮️: Previous Track
- [Volume Up Symbol] ?⬆️: Volume Up
- [Volume Down Symbol] ?⬇️: Volume Down
- [Voice Assistant Symbol] ?️: Activate Voice Assistant (e.g., Google Assistant/Siri)
Note: Specific button press combinations (e.g., single press, double press, long press) are detailed in the full manual.
Additional Operations
Factory Reset
Steps:
- Ensure earbuds are not connected to a phone.
- Double press the [MFB] on one earbud, then immediately press and hold the [MFB] for 5 seconds until the LED ? shows blue and red.
- Place both earbuds back into the charging case.
Call Handling
- Answer/End Call ?: Single press the [MFB].
- Reject Call ??: Press and hold the [MFB] for 2 seconds.
- Switch Call: Press and hold the [MFB] for 2 seconds during a call.
LED Indicator Status
| Status | Indicator Light |
|---|---|
| Pairing ?? | Alternating Blue and Red flashes |
| Standby (Connected) ? | Blue flashes |
| Charging Case (Earbuds inside) ? | Steady Red (on case) |
| Fully Charged (Earbuds inside) | Off (on case) |
| Low Battery ? | Red flashes |
Regulatory Compliance
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IC Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Model Details: Input: 5V 140mAh, Output: 5V 80mAh, Battery: 0.573Wh.
