Motorola MOTO BUDS 250 Quick Start Guide

1. Charging

Fully charge before use.

The device can be powered through a USB-C from any CE compliant power source that implements the European interface as requested by EN 301 489-52.

Visual Description: Diagram shows a charging case with two earbuds. Indicators show '100%' for a full charge and '<100%' for a partial charge.

2. Pairing

2.1 Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.

Visual Description: Diagram shows two earbuds being removed from a charging case, with visual indicators of blue and red flashing lights.

2.2 Select "MOTO BUDS 250" from your smartphone's Bluetooth menu.

3. Fitting

3.1 Insert the MOTO BUDS into your ear and rotate to fit comfortably.

Visual Description: Diagram shows three sizes of earbud tips (S, M, L) and an illustration of inserting an earbud into the ear and rotating it for a comfortable fit.

3.2 To optimize the best fit and audio experience, it is recommended to try different earbud sizes.

4. Basic Operation

The Multi-Function Button (MFB) on each earbud controls various functions.

Power On/Off

Press and hold MFB for 4 seconds (4S).

Activate Siri/Google Assistant

Press and hold MFB for 2 seconds (2S).

Reject a call

Press and hold MFB for 2 seconds.

Receive incoming call and hold ongoing call

Single press MFB (x1).

Visual Description: Diagrams illustrate button operations: Single press (x1), Double press (x2), Triple press (x3), Long press (2S or 4S).

5. LED Indicator

Pairing

Red-blue flash

Standby

Blue flash

Charging

Red steady

Fully charged

Off

Battery low

Red flash

6. Compliance and Disposal

FCC ID: 2ARRB-MB250

IC: 20353-MB250

Disposal of the Device (environment): At the end of the product life cycle, do not dispose of this product with normal household waste. Take it to a collection point for the recycling of electrical and electronic equipment.

European Union Directives Conformance Statement: MZGW declares that this product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and all other relevant EU Directives. The Declaration of Conformity can be obtained at motorolasound.com.

UK Declaration of Conformity: MZGW declares that this product is in compliance with the requirements for UKCA marking. The Declaration of Conformity can be obtained at motorolasound.com.

Imported and distributed by: A.I.&E., Adriaan Mulderweg 9-11, 5657 EM Eindhoven, The Netherlands. Edco UK Ltd, 1st Floor, Two Chamberlain Square, Birmingham, B3 3AX, UK.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. This device complies with Industry Canada licence-exempt RSS standard(s).