Motorola Vervebuds 500 Quick Start Guide
This guide provides essential information for setting up and using your Motorola Vervebuds 500 wireless earbuds.
Getting Started
Unboxing and Fit: The Motorola Vervebuds 500 are presented as a pair of wireless earbuds and their accompanying charging case. The earbuds are small, ergonomic in-ear devices designed for a comfortable fit. The charging case is a compact, oval-shaped unit with a lid, serving to store and recharge the earbuds.
Inserting the Earbuds: An illustration demonstrates the correct method for inserting the Vervebuds 500 into the ear. It shows an earbud being placed into the ear canal, followed by a gentle twist to secure it for optimal fit and sound quality. Ensure a snug fit for the best audio experience and noise isolation.
Pairing Your Vervebuds 500
Initiating Pairing: To connect your Vervebuds 500 to a Bluetooth-enabled device (such as a smartphone or tablet), first ensure the earbuds are placed inside their charging case. Open the charging case lid. The earbuds will automatically enter pairing mode, indicated by flashing lights.
Connecting via Bluetooth: On your smartphone or device, navigate to the Bluetooth settings. Search for available devices and select "Vervebuds 500" from the list. Once selected, the earbuds will connect to your device. A confirmation sound or light indicator will typically confirm a successful connection.
Charging Your Vervebuds 500
Charging the Earbuds: Place the Vervebuds 500 into their respective slots within the charging case. Ensure they are seated correctly to make contact with the charging pins. The LED indicators on the earbuds will typically show a solid red light while charging.
Charging the Case: Connect the charging case to a power source using the provided micro USB cable. The LED indicator on the charging case will show a solid white light while charging and turn off when fully charged. A full charge of the case typically takes approximately 2 hours.
Basic Operations and Controls
The Vervebuds 500 feature touch-sensitive controls on the exterior of each earbud, allowing for convenient management of audio and calls without needing to access your device.
- Play/Pause Music: Single tap the touch control area on either earbud.
- Answer/End Calls: Single tap the touch control area on either earbud when a call is incoming or active.
- Next Track: Double tap the touch control area on the right earbud.
- Previous Track: Double tap the touch control area on the left earbud.
- Activate Voice Assistant: Long press the touch control area on either earbud to activate your device's default voice assistant (e.g., Google Assistant, Siri).
Specifications
| Specification | Details |
|---|---|
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10m (33ft) |
| Earbud Battery Life | Up to 3 hours playback |
| Charging Case Battery Life | Up to 10 hours additional playback |
| Earbud Charging Time | Approx. 1.5 hours |
| Case Charging Time | Approx. 2 hours |
| Water Resistance | IPX5 (Splashproof) |
| Driver Size | 6mm |
LED Indicators
The LED lights on the earbuds and charging case provide status information:
Earbuds:
- Solid Blue: Connected to a device.
- Flashing Blue/Red: Pairing mode.
- Solid Red: Charging.
- Off: Fully charged or not in use.
Charging Case:
- Solid White: Charging the case.
- Off: Case is fully charged or not connected to power.
