Notendahandbók um ljósstraum í gangi og sérsníða ljóssviðsmyndir
Player V2 Δημιουργία τρεξίματος και προσαρμογής φωτεινών σεναρίων
Εξοπλισμός
| • Light Stream Player V2 | • Μετατροπέας Light Stream | • Λογισμικό Light Stream |
|
 |
 |
Raflagnamynd
Accessing Light Stream Player
Accessing Light Stream Player is done using a web-vafra á tilteknu IP-tölu úr tölvu, síma eða spjaldtölvu með netaðgangi.
To connect, the network card and Light Stream Player must be on the same subnet.
Ef nauðsyn krefur skaltu breyta IP tölu netkortsins.
Example: Windows 10
- Farðu í nettengingar (stjórnborð/net og internet/nettengingar)
Select an active network connection, right-click (right mouse button) and select Properties.
- Næsta IP útgáfa 4 (TCP/IPv4) -> Eiginleikar.
- Since the Light Stream Player has a default
IP vistfang: 192.168.0.205
Til dæmisample, leIP Address: 192.168.0.112
This address must be unique and must not be repeated with other devices on the network.
Undirnetmaska: 255.255.255.255.0
Then, go to your web vafra og sláðu inn eftirfarandi færibreytur.
Sjálfgefin aðgangsskilríki:
You are now in the Light Stream Player interface.
Next, it is necessary to change the network parameters of the Light Stream Player to complete the configuration.
Change Light Stream Player network parameters
Network settings using the Player V2 menu display and control buttons.
Í Network hlutanum geturðu view núverandi breytur:
IP tölu, gríma, gátt og MAC vistfang á Ethernet tengi 1 og 2.
Til að breyta netstillingum úr hvaða hlut sem er á Ethernet 1 eða 2 skjánum, ýttu á
.
Static IP Configuration.
On the IP Address screen, place the cursor on the desired value and change the value using og .
To move to the next NETMASK screen, place the cursor on the rightmost digit and press the button again .
On the NETMASK screen, you can change the network mask using the og hnappar .
Then, press the button to move to the Set Gateway screen.
Ef þú þarft að stilla IP-gáttina skaltu velja Já og tilgreina IP-tölu hennar.
Þú munt þá fara aftur á Ethernet 1 eða 2 skjáinn.
Það mun taka 2-3 sekúndur í viðbót að uppfæra netstillingarnar.
Sæktu netstillingar í gegnum DHCP.
Á IP Assignment skjánum, veldu dhcp og ýttu á .
Það mun taka 2-3 sekúndur í viðbót að uppfæra netstillingarnar.
Changing the network parameters of the Light Stream Converter
The network card and the Light Stream Converter must be on the same subnet.
Ef nauðsyn krefur skaltu breyta IP tölu netkortsins.
The default IP address and other data are indicated on the device information label.
Go to the Light Stream software and then:
Programs->Search->Ethernet Device->Search
Auðkenndu breytirinn sem fannst-> Stillingar.
Breyttu IP tölunni í viðkomandi IP tölu.
Changing the network settings of the Light Stream Converter is complete.
Stilla dagsetningu og tíma
To configure network settings Go to Settings->Date & Time
Varúð: These settings may affect the operation of the Programmer mode.
Bætir við Art-Net tækjum og alheimum
Further work will require adding devices and universes.
Go to Settings-> Universe and devices.
Bættu tækjum og alheimum við á tvo vegu:
Aðferð 1: Notaðu Bæta við hnappana handvirkt.
Click Add ArtNet Device
In the Add Devices window, fill in:
- Name – name of the device.
- Network mode -unicast (preferred);
- IP address – network address of the device.
- Port - sjálfgefið 6454;
- Lýsing – lýsing, td senunúmer.
To add universes, click Add Universe and in the window that opens, fill in:
- Number – universe number (numbering is end-to-end according to the ArtNet v.4 protocol), in addition, the universe number according to the ArtNet v.3 protocol (Net.Subnet.Universe) is displayed.
- ArtNet tæki – veldu tækið sem áður var bætt við.
Aðferð 2: Automatically import from Light Stream software.
Go to Light Stream, then: Photos-> select Light Stream Player-> enter Username and Password-> click the Submit button.
After that, refresh the Light Stream Player web-browser page.
ArtNet tækjum og alheimum bætt við.
Að búa til og hlaða hreyfimyndir
You will need ready-made animations for download, and you can learn how to create them on our YouTube channel ( https://www.youtube.com/@lightstreampro/featured ) and, in particular, in the video (Quick Start in the Light Stream Program) at the link: https://www.youtube.com/watch?v=7yMR__kkpFY&ab_channel=LightStream
Exporting completed animations from Light Stream
Farðu síðan í web-interface of Light Stream Player and download ready-made animations
Cues flipi-> Upload Cue hnappur
Synchronize the frame rate of animations in the settings of Light Stream Software and Light Stream Player.
Go to the Settings->Player tab, and in the FPS line.set the value equal to the Frame rate parameter (the window pops up when you press the left button during animation in Light Stream software).
The cartoons have been uploaded.
Búðu til lagalista
Go to the “Playlists” tab and click “Add Playlist.”
Click Add hint.
Select the animations you want and click Add.
Playlist creation completed
Creating events and scenarios
To create an event, go to the Schedule tab->Event List->Add Event
Read more about the Repeat function.
There are several ways to select Frequency:
Hourly ham.
Create a backup copy
To save backup settings or to transfer settings from one player to another, use the Backup function.
In the Light Stream Player web-interface, go to the Settings->Maintenance tab.
Til hamingju!
Grunnstillingar eru gerðar!
www.lightstream.pro
Flýtileiðarvísir
Uppfært: Nóvember 2024
Skjöl / auðlindir
 |
Ljósstraumur í gangi og sérsníða ljóssviðsmyndir [pdfNotendahandbók V1, V1, EN.v0.14.5, keyra og sérsníða ljóssviðsmyndir, sérsníða ljóssviðsmyndir, ljóssviðsmyndir |