IQUNIX L80 Series Mechanical Keyboard
0G80 SERIES
MECHANICAL KEYBOARDS
We recommend that you read this manual thoroughly before using the product.
LED Indicator Status Description
Red Light Blinking
Low Battery Level
Blue Light Blinking / Flashing
Bluetooth Device #1 Re-Connecting / Pairing On
Turquoise Light Blinking / Flashing
Bluetooth Device #2 Re-Connecting / Pairing On
Yellow Light Blinking / Flashing
Bluetooth Device #3 Re-Connecting / Pairing On
Pink Light Blinking / Flashing
2.4GHz Device Re-Connecting / Pairing On
White Light On/ Blinking
Caps Lock On & Off / Special Keys Combination Enabled
Hold 
first, then corresponding keys to enable special keys combination.
Short Press: Hold FN first, then the corresponding key, and release both keys.
Long Press: Hold FN first, then the corresponding key. Hold for 5 seconds until the indicator starts blinking.
Three Ways of Connecting Devices
Bluetooth Mode
- Toggle the keyboard Mode Switch to the wireless side.
- Short Press +
to make the indicator blink in blue,
then Long Press + to make the indicator flash in blue. - Select the pairing device [IQUNIX L80 BT 1]. The indicator turns off when the keyboard is paired successfully.
In order to complete the pairing of the keyboard with a second or third new Bluetooth device, repeat the instructions from Step 8 and replace the “FN+1” with “FN+2” or “FN+3”. The devices will be shown as [IQUNIX L80 BT 2] and [IQUNIX L80 BT 3].
2.4GHz Mode
- Toggle the keyboard Mode Switch to the wireless side.
- Plug the 2.4GHz receiver into your computer.
- (D Press +
to enter 2.4GHz pairing mode. The indicator turns off when the keyboard is paired successfully.
Wired Mode
- Toggle the keyboard Mode Switch to the wired side.
- Plug the USB cable into your device.
*When being plugged into the computer, the keyboard will start to charge automatically.
*Caution: The rated power for the charger must not exceed 5V=1A. Connection to a higher power output will damage the keyboard.
Special Keys Combinations
Backlight Keys Combinations (Short Press)
Keyboard Layout
Follow us: IQUNIX
To learn more details, please reach out to us on official website or social media. Official website: www.lQUNIX.store
- Series: LSD
- Number of Keys: 83
- Input: 5V=1A
- Battery Specifications: 3.7V 4000mAh
- Precautions: See Warranty Card
- Manufacturer: Shenzhen Silver Storm Technology Co., Ltd. A905, Rongchaobinhai Bldg., Haixiu Rd., Bao’an District, Shenzhen, China
- Packing List: Keyboard, Dust Cover, USB Cable, 2.4GHz Receiver, Keycap & Switch Puller, Bluetooth Dongle, Manual, Warranty Card
SPECIFICATION
|
Product Specification |
Description |
|
Series |
OG80 |
|
Number of Keys |
83 |
|
Input |
5V=1A |
|
Battery Specifications |
3.7V 4000mAh |
|
Precautions |
See Warranty Card |
|
Manufacturer |
Shenzhen Silver Storm Technology Co., Ltd. A905, Rongchaobinhai Bldg., Haixiu Rd., Bao’an District, Shenzhen, China |
|
Packing List |
Keyboard, Dust Cover, USB Cable, 2.4GHz Receiver, Keycap & Switch Puller, Bluetooth Dongle, Manual, Warranty Card |
FAQS
The packing list includes the keyboard, dust cover, USB cable, 2.4GHz receiver, keycap & switch puller, Bluetooth dongle, manual, and warranty card.
To connect through wired mode, toggle the keyboard Mode Switch to the wired side. Plug the USB cable into your device. The keyboard will start to charge automatically.
To connect through 2.4GHz mode, toggle the keyboard Mode Switch to the wireless side. Plug the 2.4GHz receiver into your computer. Press “FN+D” to enter 2.4GHz pairing mode. The indicator turns off when the keyboard is paired successfully.
To connect through Bluetooth mode, toggle the keyboard Mode Switch to the wireless side. Short press “FN+1” to make the indicator blink in blue, then long press “FN+1” to make the indicator flash in blue. Select the pairing device [IQUNIX L80 BT 1]. The indicator turns off when the keyboard is paired successfully. To pair with a second or third new Bluetooth device, repeat the instructions and replace “FN+1” with “FN+2” or “FN+3”. The devices will be shown as [IQUNIX L80 BT 2] and [IQUNIX L80 BT 3].
The three ways of connecting devices are Bluetooth mode, 2.4GHz mode, and wired mode.
To enable special keys combinations, hold “FN” first, then the corresponding key. For short press, release both keys. For long press, hold for 5 seconds until the indicator starts blinking.
The LED indicator status descriptions are as follows: – Red Light Blinking: Low Battery Level – Blue Light Blinking / Flashing: Bluetooth Device #1 Re-Connecting / Pairing On – Turquoise Light Blinking / Flashing: Bluetooth Device #2 Re-Connecting / Pairing On – Yellow Light Blinking / Flashing: Bluetooth Device #3 Re-Connecting / Pairing On – Pink Light Blinking / Flashing: 2.4GHz Device Re-Connecting / Pairing On – White Light On/ Blinking: Caps Lock On & Off / Special Keys Combination Enabled
Documents / Resources
 |
IQUNIX OG80 Series Wormhole Wireless Mechanical Keyboard [pdf] Instruction Manual OG80 Series, OG80 Series Wormhole Wireless Mechanical Keyboard, Wormhole Wireless Mechanical Keyboard, Wireless Mechanical Keyboard, Mechanical Keyboard, Keyboard |
