IQUNIX OG80 SERIES MECHANICAL KEYBOARDS

We recommend that you read this manual thoroughly before using the product.

LED Indicator Status Description

The indicator is located between ESC and F1.

Red Light Blinking: Low Battery Level
Blue Light Blinking / Flashing: Bluetooth Device #1 Re-Connecting / Pairing On
Turquoise Light Blinking / Flashing: Bluetooth Device #2 Re-Connecting / Pairing On
Yellow Light Blinking / Flashing: Bluetooth Device #3 Re-Connecting / Pairing On
Pink Light Blinking / Flashing: 2.4GHz Device Re-Connecting / Pairing On
White Light On / Blinking: CapsLock On&Off / Special Keys Combination Enabled

Special Keys Combination Activation

Hold FN first, then corresponding keys to enable special keys combination.

Short Press: Hold FN first, then the corresponding key, and release both keys.

Long Press: Hold FN first, then the corresponding key. Hold for 5 seconds until the indicator starts blinking.

Three Ways of Connecting Devices

Bluetooth Mode

Toggle the keyboard Mode Switch to the wireless side. [Visual: Mode switch slider in wireless position, indicated by a Bluetooth symbol].
Short Press FN + 1 to make the indicator blink in blue, then Long Press FN + 1 to make the indicator flash in blue.
Select the pairing device [IQUNIX OG80 BT 1]. The indicator turns off when the keyboard is paired successfully.

In order to complete the pairing of the keyboard with a second or third new Bluetooth device, repeat the instructions from Step 2 and replace the "FN+1" with "FN+2" or "FN+3". The devices will be shown as [IQUNIX OG80 BT 2] and [IQUNIX OG80 BT 3].

2.4GHz Mode

Toggle the keyboard Mode Switch to the wireless side. [Visual: Mode switch slider in wireless position, indicated by a 2.4GHz symbol].
Plug the 2.4GHz receiver into your computer. [Visual: Laptop with a USB port, showing a small 2.4GHz wireless receiver plugged in].
Press FN + 4 to enter 2.4GHz pairing mode. The indicator turns off when the keyboard is paired successfully.

*Please find the 2.4GHz receiver under the magnetic cover of OBSC (On-Board Storage Compartment).

Wired Mode

Toggle the keyboard Mode Switch to the wired side. [Visual: Mode switch slider in wired position, indicated by a USB symbol].
Plug the USB cable into your device. [Visual: Laptop with a USB port, showing a USB cable connecting to it].

*Caution: The rated power for the charger must not exceed 5V-1A. Connection to a higher power output will damage the keyboard.

Special Keys Combinations

Press FN + [Key] for special functions. Refer to the keyboard layout diagram for key positions.

Long Press FN + TAB: Switch Between Mac/Windows Layout
Long Press FN + WIN: WinLock
Long Press FN + Space: Reset to Default
Short Press FN + Enter: Play/Pause
Short Press FN + ←: Previous
Short Press FN + →: Next
Short Press FN + B: Battery Level Check. The LED Indicator blinks 1, 2, 3,...10 times, which stands for 10%, 20%, 30%,...100% battery level.

Backlight Keys Combinations (Short Press)

Press FN + [Key] for backlight control. *Available for Backlit version only.

FN + DEL: Backlight On/Off
FN + PgUp: Brightness +
FN + PgDn: Brightness -
FN + Home: Backlight Effects Switching
FN + End: Backlight Colors Switching
FN + ↑: Backlight Speed +
FN + ↓: Backlight Speed -

Keyboard Layout

The keyboard features a standard QWERTY layout with dedicated function keys (F1-F12), navigation keys, and modifier keys. Specific key combinations for special functions and backlight control are detailed in their respective sections.

Product Specifications and Support

To learn more details, please reach out to us on official website or social media. Official website: www.IQUNIX.store

Specifications:

Series: OG80
Number of Keys: 83
Input: 5V-1A
Battery Specifications: 3.7V 4000mAh
Precautions: See Warranty Card
Manufacturer: Shenzhen Silver Storm Technology Co., Ltd.
Address: A905, Rongchaobinhai Bldg., Haixiu Rd., Bao'an District, Shenzhen, China

Packing List:

Keyboard
Dust Cover
USB Cable
2.4GHz Receiver
Keycap & Switch Puller
Bluetooth Dongle
Manual
Warranty Card

	IQUNIX OG80 Series Mechanical Keyboards User Guide Comprehensive user guide for the IQUNIX OG80 Series mechanical keyboards, detailing connection modes (Bluetooth, 2.4GHz, Wired), function key combinations, backlight controls, LED indicator status, and layout switching for enhanced usability.
	IQUNIX L80 Series Mechanical Keyboards User Manual Comprehensive user manual for the IQUNIX L80 Series Mechanical Keyboards, covering setup, connectivity modes (Bluetooth, 2.4GHz, Wired), special key combinations, backlighting, and technical specifications.
	IQUNIX F65 Series Mechanical Keyboard User Manual User manual for the IQUNIX F65 Series Mechanical Keyboard, covering Bluetooth and 2.4GHz connectivity, LED indicators, FN key combinations, and specifications.
	IQUNIX OG80 Mechanical Keyboard User Manual User manual for the IQUNIX OG80 Mechanical Keyboard, detailing setup, connectivity, features, and key combinations for Bluetooth, 2.4GHz, and wired modes.
	IQUNIX A80 Series Mechanical Keyboard User Guide Comprehensive user guide for the IQUNIX A80 Series mechanical keyboards, covering setup, connection modes (Bluetooth, 2.4GHz, Wired), key combinations, and LED indicator status.
	IQUNIX ZX75 Mechanical Keyboard User Manual User guide for the IQUNIX ZX75 mechanical keyboard. Learn about setup, connectivity (Bluetooth, 2.4G, Wired), indicator lights, key combinations, and product specifications. Includes manufacturer details and official website.
	IQUNIX L80 Series Mechanical Keyboard User Guide - Connectivity, Features, and Specifications Comprehensive user guide for the IQUNIX L80 Series Mechanical Keyboard, covering Bluetooth, 2.4GHz, and wired connection modes, function key combinations, LED indicator status, and regulatory information.
	IQUNIX M80 Mechanical Keyboard Quick User Guide A concise guide to the IQUNIX M80 Mechanical Keyboard, covering Bluetooth connection, key functions, LED indicators, and product specifications.