Zeta SMART Jikọọ Ntuziaka nwụnye ọtụtụ Loop Repeater

Nwụnye
The Smart Connect Multi-loop Repeater nwere ike ịbụ n'elu ma ọ bụ gbanye ya. Gbaa mbọ hụ na nrịgo kwesịrị ekwesị iji nye ohere na ọhụhụ dị mfe.

Njikọ Ike
Jikọọ ọkụ ọkụ na onye na-emegharị ya na-eso ntuziaka enyere na ntuziaka nwụnye.

Ntọala netwọkụ
Hazie onye na-emegharịgharị ka ọ jikọọ na netwọk Smart Connect Multi-loop njikwa mkpu ọkụ ọkụ. Soro ntuziaka ntọala netwọk nyere na ntuziaka.

Mmemme
Jiri ngwa nhazi ngwanrọ dabere na Windows, Smart Connect, iji hazie sistemụ dabere na ihe achọrọ arụ ọrụ. Rụtụ aka na ntuziaka maka ntuziaka mmemme zuru ezu.

Nleba anya na arụ ọrụ
Jiri ihe ngosi ihuenyo mmetụ 4.3 ″ yana ihe ngosi LED iji nyochaa ozi sistemụ ma jikwaa ogwe netwọkụ nke ọma.

Okwu mmalite

Banyere Smart Connect Multi-loop Repeater

Enwere ike iji Zeta Smart Connect Multi-loop Repeater Panel iji nyochaa, rụọ ọrụ na mmemme Smart Connect Multi-loop fire alarm control panels (FACPs) site na ebe ọ bụla n'ime usoro netwọk.

Repeater nwere ihe ngosi ihuenyo mmetụ agba 4.3 ”nke na-enye ozi sistemu dị mfe nghọta. A na-ahazi Repeater na ergonomically na LED, bọtịnụ na ntọala menu nke na-egosipụta nke ọma Smart Connect.
Ogwe njikwa ọtụtụ loop. Nke a ga-eme ka Repeater mara nke ọma iji maka ndị a zụrụ azụ/ahụmahụ na iji sistemụ Njikọ Smart.

Ọ nwere ike ịrụ ọrụ dị ka akụkụ nke sistemụ netwọkụ nke ruru 64 panel's peer-to-ther, yana nhọrọ mmemme siri ike nke na-enye ohere njikwa njikwa ma a na-ebufe ozi sitere na akụkụ ụfọdụ gburugburu netwọkụ ma ọ bụ nọrọ na mpaghara.
32-bit microcontroller (MCU) na obi panel na-eme ngwa ngwa mkpebi ndị ezi uche dị na ya dabere na ọnọdụ nke nchọpụta anwụrụ ọkụ na ngwaọrụ ndị ọzọ na-amalite iji chịkwaa mmepụta usoro. A na-eji ngwa nhazi ngwanrọ dabara na Windows
Hazie ọrụ sistemụ dabere na ihe ndị ahịa chọrọ ka ọ rụọ ọrụ, wee belata oge ntinye/nwụnye.

Sistemụ Smart na-enyocha sọftụwia na ngwaike niile maka ịrụ ọrụ nke ọma. Ọ na-enyocha ngwa ngwa eletrọnịkị njikwa njikwa, ihe nchekwa sistemu na mmemme sistemụ. Enyere sekit nche ngwaike iji hụ na mmemme Sistemu na-arụ ọrụ nke ọma. Ọ bụrụ na nsogbu amalite na mmemme ma ọ bụ ihe nrụpụta, sekit na-ahụ maka nchekwa na-etinye Sistemu n'ọnọdụ mmejọ sistemụ wee gbalịa ịtọgharịa ya.
Ihe mkpuchi Smart Connect Multi-loop Repeater nwere ike ịdị elu ma ọ bụ gbanye ya.

N'ozuzu atụmatụ

4.3" agba ihuenyo mmetụ aka.
8032 Ndekọ mmemme.

Ruo 64 panel netwọk ọgbọ-na-ọgbọ.
13 ọnọdụ LED egosi.

5 njikwa bọtịnụ ọrụ.
Repeater na-arụ ọrụ zuru oke na-enye ikike ịme mmemme njikwa njikwa njikwa ọtụtụ njikwa netwọkụ Smart Connect site na ihuenyo ihu.

Na-anabata ogologo wiring ruo mita 1000 site na njikwa njikwa maka imewe agbakwunyere na wụnye mgbanwe.
Netwọk anyị nwere ike ịgbanye n'ime ụgbọ ala ma ọ bụ mgbanaka topology ma ọ bụrụ na achọrọ ụzọ anaghị arụ ọrụ.

Akaụntụ ohere nchekwa paswọọdụ 8 dị (ọkwa nchịkwa 1, ọkwa onye ọrụ 7).
Ihe nlegharị anya na-enweghị mgbagwoju anya na nke nwere nghọta na-enye ohere Mkpu, nlekọta, na ihe omume nsogbu dị mfe viewed.

Mgbakọ akwụkwọ

Sekit na Mpaghara

sekit = Nke a na-ezo aka n'ezie eletriki interface, mmalite (nchọpụta), na-egosi (ịkọma), ma ọ bụ relay.

Mpaghara = nke a bụ echiche ezi uche dị na ya maka mpaghara nchekwa mkpuchi ọkụ, ọ ga-enwe ma ọ dịkarịa ala otu sekit.
A na-eji usoro mpaghara na sekit eme ihe n'otu oge n'ime akwụkwọ ntuziaka a.

Na sistemụ Multi-loop Smart Connect, sekit nwere ike ịbụ ihe ntinye ma ọ bụ ihe a ga-agwa ya. Ihe ntinye na ntinye aka siri ike, yana ntinye na ntinye nwere ike ịchịkọta ọnụ iji mepụta mpaghara ezi uche dị na ya.

Ọkụ oti mkpu ọkụ na-ahụkarị Smart Network

Ngwa sistemu

Gosipụta PCB (MMP/DSP)

4.3" agba ihuenyo mmetụ aka
32-bit microcontroller (MCU)
Jikọọ USB na PC software
Ntinye ngbanwe igodo 2

PCB kwụsịrị (MMP/REP_COM)

bọtịnụ nrụpụta CPU
RS485 IN & Out ọnụ
28VDC IN & Out ọnụ

Nwụnye panel na akụkụ

Akụkụ Mkpuchi
Lee tebụl 1 maka akụkụ zuru ezu.

Tebụl 1

Ogwe	A	B	C	D	E	F	Ọpụpụ ịkụ aka kacha elu	Ọpụpụ ịkụ aka	Mgbapụ ịkụ aka n'okpuru	Oke batrị kacha
SMART/REP	230mm	340mm	307mm	96mm	70mm	200mm	5	0	0	N/A

Nkọwa ihe nrụpụta panel

Emepụtara ihe niile sitere na Zintec.

Akụkụ niile 0.9 mm.
Agba agba maka igbe na ọnụ ụzọ bụ RAL9005 Black Leatherette.
Ndị internals bụ RAL9005 Black Leatherette.

Enwere ike ịkwanye ihe mgbochi ugboro ugboro n'ime mgbidi ma ọ bụ n'elu elu.

Ịchọta Ogwe njikwa mkpu ọkụ
Ekwesịrị ịwụnye panel njikwa kwa BS5839-1: ndụmọdụ 2017: -

Ogwe ahụ kwesịrị ịdị nso na ọnụ ụzọ isi nke ụlọ ahụ, ka o wee bụrụ viewed site na ndị ọrụ mgbanyụ ọkụ ọ bụla na-abanye n'ụlọ ahụ.

Ekwesịrị itinye ya na mgbidi siri ike nke na-agaghị agbanwe agbanwe na-enweghị isi.
Ekwesịrị ịkwanye ya n'ogo anya, ka ọ dị viewed enweghị mkpa nke ubube.
Ekwesịrị itinye ya n'ebe kpọrọ nkụ, nke na-egbochi ihu igwe, ọkachamma Ọ BỤGHỊ na ìhè anyanwụ kpọmkwem.

Ọ ga-adị mfe ịnweta ya, ka onye ọrụ ahụ nwee ike na-enyocha mkpu ọkụ ha mgbe niile.

Ogwe ahụ ga-anọrịrị n'ọnọdụ dị ọcha, kpọrọ nkụ, nke na-agaghị enwe oke ujo ma ọ bụ ịma jijiji ma ọ dịkarịa ala mita 2 site na sistemu pager ma ọ bụ akụrụngwa mgbasa ozi redio ọ bụla. Oke okpomọkụ na-arụ ọrụ bụ -5°C (23°F) ruo 40°C (104°F); oke iru mmiri bụ 95%. Ogwe ahụ ga-anagide mkpọtụ n'etiti 5 & 150 Hz.

Ịkwanye ogige ahụ
Dozie ihe mkpuchi ahụ na mgbidi ahụ site na iji ihe nkwụnye ihe niile enyere:
SMART/Rep: 3 x Ebe mgbago. Lee foto 1

Lelee ihe owuwu na ọnọdụ nke mgbidi iji kpebie nhazi nkedo kwesịrị ekwesị. The arịọnụ oghere e mere maka No 8 roundhead ma ọ bụ countersunk woodscrews (ma ọ bụ yiri). Wepu irighiri ihe ọ bụla n'ime ogige ahụ. Kpachara anya ka ị ghara imebi panel ahụ n'oge ntinye.

IHE: Egwula oghere ọ bụla n'ime akụkụ PCB nke Mkpuchi

Akụkụ Nrịgo ugwu

Atụmatụ ntinye eriri USB

Enwere ike iwepụ ndenye eriri Knock-out n'ụzọ dị mfe site na iji screwdriver ma ọ bụ chisel dabara adaba site na mpụga igbe azụ mkpuchi. N'aka nke ọzọ, enwere ike ịkụnye ntinye ahụ, na-eji onye na-egbutu oghere 20mm. Ekwesịrị ilebara anya ma ọ bụrụ na ị na-eji egwu egwu. Tụlee iwepụ PCB iji gbochie imebi ha.

Onye nkwughari na-abịa na oghere ntinye eriri 5. Ọ bụrụ na achọrọ oghere ntinye ọzọ, a na-atụ aro ka ọ bụrụ ọnụ ụzọ panel ahụ
wepụrụ iji zere mmebi mberede. Ọzọkwa, ekwesịrị iwepụ PCB ma chekwaa ya na ebe nchekwa. Nke a ga-enye aka mgbe ị na-edozi igbe azụ na mgbidi.

IHE: Ejila oghere mbata ọ bụla n'ime akụkụ ọnụ ụzọ nke Mkpuchi.

USB Grounding
The Repeater enweghị esịtidem ogwe osisi. A na-atụ aro ka jikọọ wiwi netwọk na ala na Smart Connect panel Control panel (naanị otu akụkụ nke wiwi netwọk kwesịrị ịgbatị).

DC Power Wiring
SMART/REP kwesịrị ịkwado ya site na ọkụ ọkụ 28VDC mpụga EN54 kwadoro. A ga-enwerịrị akara eriri ndị a na-eji maka nke a ọkụ.

Nkwanye
Ọdụdọ DC na Repeater kwesịrị idozi wiring, na-eji eriri ọkụ na-eguzogide 3-core (N'etiti 1 mm² na 2.5mm²), ma ọ bụ otu. Ekwesịrị inye nri AC na-enye PSU site na ngbanwe pọlụ abụọ (ma ọ bụ otu) dịpụrụ adịpụ fused spur, wee jikọta ya na 5A. Ekwesịrị ịchebe nke a site na ọrụ na-akwadoghị ma kaa ya akara 'Ọkụ Mkpu: agbanyụla'. Ọbịbịa ahụ ga-abụrịrị naanị maka onye na-emegharị ya.

Jikọọ ike DC
Ekwesịrị idowe eriri ọkụ DC na-abata iche na eriri netwọk RS485 iji nyere aka belata ndabichi.

IHE: Hụ na olulu mbata mapụtara nke emeghere, mana ejighi ekpuchi ya na grommets dabara adaba ma ọ bụ screws.

Ọ bụ ihe amamihe dị na ya itinye ike na onye na-emeghachi ya tupu ị jikọọ eriri netwọk ọ bụla, ịlele maka ịrụ ọrụ ziri ezi, yana ịmara onwe gị na njikwa akụkụ ndị ọzọ.
Ọ bụrụ na ewepụrụ knockout, jupụta oghere na eriri eriri kwesịrị ekwesị. Ọ bụrụ na ewepụrụ ọkpọ ọkpọ ọ bụla, mana emesịa ejighi ya, ekwesịrị kpuchie ya.

Ọgụgụ 4: 28V DC eriri ọnụ wiring

IHE: Lelee ikike dị mma tupu ịgbanye ike.

Ike mbụ
A na-atụ aro ka ịmalite ịgbanye onye na-emegharị ihe na-enweghị netwọk netwọk ejikọrọ iji gosi na panel ntọala na-arụ ọrụ dịka a tụrụ anya ya. Iji mee nke a:-

Lelee na ejikọrọ eriri DC nke ọma.

Mechie ọnụ ụzọ panel
Gbanwuo ike DC. A ga-ahụ ihe ndị a: -
- Ike, Mmejọ na Sistem Fault LEDs ga-enwu maka gburugburu 6 sekọnd
- Mmejọ na Sistemụ Fault LED ga-agbanyụ. Igwe ọkụ ọkụ ga-amụba anya ugboro ole na ole
- LCD ga-egosi mmetụ maka mmezi. Pịa ihuenyo n'ime sekọnd 3 iji mee mmezi ihuenyo. (A na-edozi ihuenyo ahụ na ụlọ ọrụ mmepụta ihe, yabụ, a naghị achọkarị usoro a)
- LCD na-egosi akara Zeta maka sekọnd ole na ole, ebe ọ na-enyocha iji hụ ihe modul dabara adaba. (Rịba ama: egosighi ọkọlọtọ "System Healthy" na-emebu n'oge nlele modul.)
- Hapụ panel ahụ gbanye maka 100 sekọnd.
- Ọ bụrụ na enweghị mmejọ a kọrọ, panel ahụ agafeela ike ya na ule. Enwere ike gbanyụọ ya ugbu a yana eriri netwọk nwere ike ịkwado ya.

Ubi wiring

IHE: A na-ewepụ ihe mgbochi ọnụ iji mee ka wiwi dị mfe.

Njikọ netwọkụ RS485view
Topology ụgbọ ala

Ring Topology

IHE: A na-atụ aro ka ịwụnye netwọkụ na mgbanaka topology maka nchebe pụọ na mmejọ sekit mepere emepe na mkpụmkpụ.

Ntụnye wiring maka wiwi netwọkụ
Netwọk smart nwere ike ịkwado ihe ruru 64 panel.

CABLE akwadoro: Belden ma ọ bụ dakọtara

Nkọwa netwọkụ

RS485 netwọkụ
Oke netwọk kacha	64 Ọnụ
Kachasị anya n'etiti ọnụ	1km (ya na eriri data enyo enyo) 100M (iji eriri ọkụ na-ekpuchi ọkụ)*
Protocol nzikọrịta ozi	RS485
Ụdị Wiring netwọkụ	Ụgbọ ala ma ọ bụ mgbanaka

* BS 5839-1: 2017 chọrọ ka eriri netwọk bụrụ ọkọlọtọ ọkụ ọkụ (enwere ike ịchọrọ eriri ọkụ ọkụ maka nrụnye akọwapụtara).

Ọrụ

Rụtụ aka na ntuziaka ọrụ nke Smart Connect Multi-loop Operation (Doc: GLT-261-7-11).

Ịchọta mmejọ
Rụtụ aka na ngalaba nchọpụta nsogbu na Smart Connect Multi-loop Operation Manual (Doc: GLT-261-7-11).

Ihe mgbakwunye A: NKWUO

Koodu
Nkọwa	Smart Connect Multi-loop Repeater
Isi ọkọnọ
Nrụ ọrụ Voltage	28VDC
Quiescent dị ugbu a	78mA
Kachasị ugbu a	100mA
Netwọk
Protocol nzikọrịta ozi	RS485
Oke netwọk kacha	64 Ọnụ
Kachasị anya n'etiti ọnụ	1km (na-eji eriri data enyo enyo) 100m (na-eji ọkọlọtọ ọkụ anaghị ekpuchi eriri)
Ụdị Wiring netwọkụ	Ụgbọ ala mgbanaka (atụ aro)
Ngwa ngwa
Ndekọ mmemme kacha	8032 Ihe omume
Mmemme ngwanrọ	LCD mmetụ ihu
Ngosipụta
LCD	Ihuenyo mmetụ na-eguzogide 4.3. 480 x 272 pikselụ mkpebi
Ihe ngosi LED	2 Red (1 x Ọkụ, 1 x Sounder Active), 1 Green (Ike), 10 Yellow (1 x Relay Delay, 1 x Fault, 1 x Sounder Delay, 1 x Control Active, 1 x General Disablement, 1 x General Test, 1 x Sounder Fault/Disablement, 1 x Sounder Ọnwụ, 1 x Mmejọ Sistemu, 1 x More Data).
Njikwa bọtịnụ	Kwụsị ndị na-ada ụda, ịgbachi nkịtị Buzzer, Ngosipụta Pịgharịa, Tọgharia, malite ụda olu
Mkpuchi
Akụkụ H x W x D (mm)	230mm x 340mm x 96mm
Ibu	2.3kg
Ntinye USB	5 (Ihe ndenye kachasị)
Nha Wiring Terminal	1mm² - 2.5 mm²
gburugburu ebe obibi
Okpomọkụ na-arụ ọrụ	-5°C ruo 40°C
Iru mmiri dị nso	93% na-abụghị condensing

www.zetaalarmsystems.com

FAQ

Ajụjụ: Enwere ike iji Smart Connect Multi-loop Repeater na ogwe njikwa mkpu ọkụ ndị ọzọ?
- A: Emebere onye nkwugharị ahụ ka ọ rụọ ọrụ na ogwe njikwa ọkụ Smart Connect Multi-loop ma ọ nwere ike ọ gaghị adaba na sistemụ ndị ọzọ.
Ajụjụ: Kedu ihe omume ole enwere ike ịchekwa na ndekọ mmemme?
- A: Onye na-emegharị ihe nwere ike ịchekwa ihe ruru 8032 na ndekọ ihe omume maka ntụaka na ebumnuche nchọpụta.

Akwụkwọ / akụrụngwa

Zeta SMART jikọọ Multi Loop Repeater [pdf] Ntuziaka nwụnye
GLT-261-7-1.

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Zeta SMART jikọọ Multi Loop Repeater

Ozi ngwaahịa