UNITRONICS EX-RC1 Ntinye aka ma ọ bụ ihe nrụpụta

Ntuziaka onye ọrụ EX-RC1

EX-RC1 bụ ihe nkwụnye I/O dịpụrụ adịpụ nke na-enyere aka nkwurịta okwu n'etiti Unitronics Vision OPLCs na modul I/O Expansion Modules na sistemụ gị. Ejikọrọ ihe nkwụnye a na PLC site na CANbus ma nwee ike jikọọ ya na modul Mgbasawanye 8 I/O. Netwọk ahụ nwere ike ịgụnye ihe ruru ọnụ 60, gụnyere ma PLC na ihe nkwụnye, na-ekwurịta okwu site na ụkpụrụ UniCAN - Unitronics' proprietary CANbus protocol.

Njirimara akụrụngwa

Enwere ike itinye EX-RC1 n'ụgbọ okporo ígwè DIN ma ọ bụ tinye ya n'elu efere mgbago. Ihe njirimara akụrụngwa bụ:

1. Ngosipụta ọnọdụ
2. PC na EX-RC1 ọdụ ụgbọ mmiri
3. Ebe njikọ ọkọnọ ike
4. EX-RC1
   

   n'ọdụ ụgbọ mmiri njikọta modul

5. CANbus ọdụ ụgbọ mmiri
6. Mgbanwe DIP - NJ netwọkụ, CANbus

Ntuziaka ojiji ngwaahịa

• Tupu iji EX-RC1, ọ dị mkpa ịgụ na ịghọta akwụkwọ ntuziaka onye ọrụ na akwụkwọ so ya. Ezubere ngwaahịa a maka ndị ọrụ a zụrụ azụ na ndị tozuru etozu bụ ndị maara ụkpụrụ eletrik nke mpaghara na nke mba.
• Mgbe ị na-etinye ngwaọrụ ahụ, ọ dị mkpa ijide n'aka na etinyeghị ya na mpaghara nwere oke uzuzu ma ọ bụ nke na-eduzi, gas na-emebi emebi ma ọ bụ ọkụ ọkụ, mmiri ma ọ bụ mmiri ozuzo, oke okpomọkụ, mmetụta mmetụta mgbe niile, ma ọ bụ oke ịma jijiji. Ozugbo etinyere ya, ekwesịrị ịgbaso ntuziaka ndị a:
  • Lelee mmemme onye ọrụ tupu ịme ya
  • Anwala iji ngwaọrụ a nwere parampat gafere ọkwa ekwenyere
  • Wụnye ihe mgbawa sekit dị n'èzí wee were usoro nchekwa kwesịrị ekwesị megide obere mkpirisi na waya mpụga
  • Iji zere imebi sistemu ahụ, ejikọla/ịpụpụ ngwaọrụ mgbe ọkụ dị
• EX-RC1 bụ ngwa arụnyere ụlọ ọrụ na-arụ ma nwee ike chọpụta modul Mgbasa I/O dijitalụ. Agbanyeghị, ọ bụrụ na sistemụ ahụ gụnyere modul analog, a ga-edezi ngwa ahụ. Maka ozi ndị ọzọ, rụtụ aka na isiokwu I/O Remote dị na sistemụ enyemaka VisiLogic.
• N'ozuzu, EX-RC1 bụ ihe dị mkpa maka ịkparịta ụka n'etiti Unitronics Vision OPLCs na modul I/O Expansion Modules, na mgbe ejiri ya mee ihe nke ọma, nwere ike inye aka hụ na arụ ọrụ nke sistemu gị dị mma.

Banyere ngwaahịa

• Oghere EX-RC1 dị n'etiti Unitronics Vision OPLCs na modul mgbasawanye I/O dịpụrụ adịpụ ekesara na sistemụ gị niile.
• Ejikọrọ ihe nkwụnye ọkụ na PLC site na CANbus. Enwere ike jikọọ nkwụnye ọkụ ọ bụla ruo 8 I/O Modul Mgbasawanye. Netwọk nwere ike ịnwe ihe ruru ọnụ 60, gụnyere ma PLC na nkwụnye; mara na PLC ga-enwerịrị ọdụ ụgbọ mmiri CANbus. Nzikọrịta ozi sitere na UniCAN, Unitronics 'nwere CANbus protocol.
• EX-RC1 bụ ngwa arụnyere ụlọ nrụpụta. Ihe nkwụnye ọkụ nwere ike chọpụta modul Mgbasa I/O dijitalụ na akpaghị aka. Ọ bụrụ na sistemụ ahụ gụnyere modul analog, a ga-edezi ngwa ahụ. Maka ozi ndị ọzọ rụtụ aka na isiokwu I/O Remote dị na sistemụ enyemaka VisiLogic.
• Enwere ike itinye EX-RC1 n'ụgbọ okporo ígwè DIN, ma ọ bụ gbanye ya n'elu efere mgbago.

njirimara akụrụngwa

1	Ngosipụta ọnọdụ
2	PC na EX-RC1 ọdụ ụgbọ mmiri
3	Ebe njikọ ọkọnọ ike
4	EX-RC1 na ọdụ ụgbọ mmiri njikọta modul
5	CANbus ọdụ ụgbọ mmiri
6	Mgbanwe DIP

• Tupu iji ngwaahịa a, ọ bụ ọrụ dịịrị onye ọrụ ịgụ na ịghọta akwụkwọ a na akwụkwọ ọ bụla so ya.
• All examples na eserese dị n'ime ebe a bụ iji nyere nghọta aka, anaghị ekwe nkwa ịrụ ọrụ. Unitronics anaghị anabata ọrụ ọ bụla maka iji ngwaahịa a n'ezie dabere na examples.
• Biko tụfuo ngwaahịa a dịka ụkpụrụ na ụkpụrụ mpaghara na obodo siri dị.
• Naanị ndị ọrụ ruru eru kwesịrị imepe ngwaọrụ a ma ọ bụ rụzie ya.

Ntuziaka nchekwa na akụrụngwa nchekwa onye ọrụ

• Ezubere akwụkwọ a iji nyere ndị ọrụ a zụrụ azụ na ndị ruru eru n'itinye akụrụngwa a dịka ntuziaka European si kọwaa maka igwe, obere vol.tage, na EMC. Naanị onye ọrụ nka ma ọ bụ injinia a zụrụ azụ n'ụkpụrụ ọkụ eletrik nke mpaghara na nke mba kwesịrị ịrụ ọrụ ndị metụtara wiwi eletriki nke ngwaọrụ ahụ.
• A na-eji akara iji gosipụta ozi gbasara nchekwa onwe onye na nchekwa akụrụngwa nke onye ọrụ n'ime akwụkwọ a.
• Mgbe akara ndị a pụtara, a ga-agụrịrị ozi metụtara nke ọma wee ghọta nke ọma.

  

  • Ọdịda irube isi na ụkpụrụ nchekwa kwesịrị ekwesị nwere ike bute mmerụ ahụ dị ukwuu nke onwe ma ọ bụ mmebi ihe onwunwe. Na-akpachapụ anya mgbe niile mgbe ị na-eji ngwa eletrik arụ ọrụ.
  • Lelee mmemme onye ọrụ tupu ịme ya.
  • Anwala iji ngwaọrụ a nwere parampat gafere ọkwa ekwenyere.
  • Wụnye ihe mgbawa sekit dị n'èzí wee were usoro nchekwa kwesịrị ekwesị megide obere mkpirisi na waya mpụga.
  • Ka ịzenarị imebi sistemu ahụ, ejikọla/ịpụpụ ngwaọrụ mgbe ọkụ dị.

Ihe gbasara gburugburu ebe obibi

• Awụnyela na mpaghara nwere: oke uzuzu ma ọ bụ nke na-eduzi, gas na-emebi emebi ma ọ bụ nke na-ere ọkụ, mmiri ma ọ bụ mmiri ozuzo, oke okpomoku, mmetụ mmetụta mgbe niile ma ọ bụ oke ịma jijiji.
• Hapụ opekempe nke 10mm ohere maka ikuku ikuku n'etiti elu na ala ala nke ngwaọrụ na mgbidi mkpuchi.
• Edokwala n'ime mmiri ma ọ bụ kwe ka mmiri wụsa na unit ahụ.
• Ekwela ka irighiri ihe daa n'ime unit mgbe echichi.

Nkwekọrịta UL

• Akụkụ na-esote dabara na ngwaahịa Unitronics nke edepụtara na UL.
• Ụdị ndị a: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8,
  IO-DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X bụ UL edepụtara maka ebe dị egwu.
• Ụdị ndị a: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IOAI4-AO2, IO-AI4-AO2-B, IO-AI8, IO-AI8, IO-AI6, IO-AI8Y IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8-L, IO-DI8-RO8 IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO-LC3, IO-PT4, IOPT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TORCD16, EX-din, bụ ndị e depụtara. Ebe.

Ogo UL, ndị njikwa mmemme maka ojiji na ebe dị ize ndụ, Klas I, Nkeji 2, Otu A, B, C na D
Ihe ndetu mwepụta ndị a metụtara ngwaahịa Unitronics niile nwere akara UL ejiri akara ngwaahịa akwadoro maka ojiji na ebe dị ize ndụ, Klas I, Nkeji 2, Otu A, B, C na D.

Ịkpachara anya

• Ngwa a dabara adaba maka ojiji na Klas I, Nkeji 2, Otu A, B, C na D, ma ọ bụ naanị ebe adịghị ize ndụ.
• Ntinye na ntinye wiwi ga-adịrịrị na klaasị I, usoro nkewa nkewa nke abụọ yana dabere na ikike nwere ikike.
•  ỊDỌ AKA NA NTỊ—Mgbawa Ihe ize ndụ—ngbanwe nke akụrụngwa nwere ike imebi adabara klaasị I, Nkeji 2.
• Ịdọ aka ná ntị – Ihe egwu mgbawa – Ejikọtala ma ọ bụ kwụpụ akụrụngwa ọ gwụla ma agbanyụrụ ọkụ ma ọ bụ mara na mpaghara ahụ adịghị ize ndụ.
• Ịdọ aka ná ntị – Ikpughe na ụfọdụ kemịkalụ nwere ike weda njirimara akara nke ihe eji na Relays.
• A ga-etinyerịrị akụrụngwa a site na iji ụzọ wiwi dị ka achọrọ maka Klas I, Nkeji 2 dịka NEC na/ma ọ bụ CEC siri dị.

Ntụle Nguzogide Mmepụta Relay

• Ngwaahịa ndị e depụtara n'okpuru nwere nsonaazụ relay:
• Ntinye / mmepụta modul mgbasawanye, Ụdị: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L
• Mgbe a na-eji ngwaahịa ndị a kpọmkwem na ebe dị ize ndụ, a na-enye ha na 3A res, mgbe a na-eji ngwaahịa ndị a kpọmkwem na ọnọdụ gburugburu ebe obibi na-adịghị ize ndụ, a na-edepụta ha na 5A res, dị ka e nyere na nkọwa ngwaahịa ahụ.

Ịkwalite Module

DIN-ụgbọ okporo ígwè arịọnụ
Snap ngwaọrụ n'elu DIN okporo ígwè dị ka egosiri n'okpuru; modul ahụ ga-adị n'akụkụ okporo ụzọ DIN.

Ịghasa-nkwalite

• Esereghị ọnụ ọgụgụ dị n'okpuru na nha. Enwere ike iji ya dịka ntuziaka maka ịwụnye modul.
• Ịkwado ịghasa ụdị: ma M3 ma ọ bụ NC6-32.

  

Ịtọlite ​​nọmba ID Unit

• Nọmba ID sitere na 1 ruo 60.
• Ntọala ngbanwe DIP na-anọchi anya nọmba ID dị ka ọnụọgụ ọnụọgụ abụọ dịka egosiri na ọnụ ọgụgụ ndị a.

  

Na-ejikọta modul Mgbasawanye

Ihe nkwụnye ọkụ na-enye interface n'etiti OPLC na modul mgbasawanye. Iji jikọọ modul I/O na nkwụnye ọkụ ma ọ bụ na modul ọzọ:

1. Pịa njikọ modul-na-modul n'ime ọdụ ụgbọ mmiri dị n'akụkụ aka nri nke ngwaọrụ ahụ.
   Rịba ama na enwere okpu nchebe nyere ya na nkwụnye. Okpu a na-ekpuchi ọdụ ụgbọ mmiri nke modul I/O ikpeazụ na sistemụ.
   Iji zere imebi sistemu ahụ, ejikọla ma ọ bụ kwupu ngwaọrụ mgbe ọkụ dị.

njirimara akụrụngwa

1	Module-na-modul njikọ
2	Okpu mkpuchi

Wiring

• Emetụla waya ndị dị ndụ aka.
• E kwesịghị ijikọ atụdo ejighi ya. Ileghara ntuziaka a nwere ike imebi ngwaọrụ ahụ.
• Lelee wiwi niile ugboro abụọ tupu ịgbanye ọkụ ọkụ.
• Ejikọla akara 'Neutral' ma ọ bụ 'Line' nke 110/220VAC na pin 0V nke ngwaọrụ ahụ.
• N'ihe omume nke voltage mgbanwe ma ọ bụ enweghị nkwekọrịta na voltage nkọwapụta ọkụ eletrik, jikọọ ngwaọrụ na ọkọnọ ike ahaziri.
•  Lelee wiwi niile ugboro abụọ tupu ịgbanye ọkụ ọkụ.

Usoro waya

• Jiri ọnụ crimp maka wiring; jiri 26-14 AWG waya (0.13 mm 2-3.31 mm2) maka ebumnuche wiring niile.
  1. Wepụ waya ahụ n'ogologo 7± 0.5mm (0.250-0.2.08 inch).
  2. Kpọghee ọnụ ọnụ ahụ n'ebe kacha obosara tupu ịtinye waya.
  3. Fanye waya kpamkpam n'ime ọnụ iji hụ na enwere ike ịme njikọ kwesịrị ekwesị.
  4. Jidesie ike ka waya ghara ịdọrọ n'efu.
• Iji zere imebi waya, agabigala oke ike nke 0.5 N·m (5 kgf·cm).
• Ejila tin, solder, ma ọ bụ ihe ọ bụla ọzọ dị na waya a dọwara apụ nwere ike ime ka eriri waya gbajie.
• Wụnye n'ebe dị anya site na elu-voltage cables na ike akụrụngwa.

Ntinye ike wiring

Jikọọ eriri "ezigbo" na ọdụ "+ V", yana "adịghị mma" na njedebe "0V".

Ịmepụta ihe na-enye ike
Iji bulie arụmọrụ sistemu, zere nnyonye anya electromagnetic site na:

• Ịkwanye modul na panel metal.
• Ịkwado ọkụ eletrik modul: jikọọ otu njedebe nke waya 14 AWG na mgbama chassis; jikọọ nsọtụ nke ọzọ na panel.
  Mara: Ọ bụrụ na ọ ga-ekwe omume, waya a na-eji ala ọkụ eletrik ekwesịghị ịfe 10 cm n'ogologo. Agbanyeghị, a na-atụ aro ka ala modul n'ọnọdụ niile.

  

Nkwukọrịta

Jikọọ EX-RC1 na PC
Jikọọ PC na nkwụnye site na eriri mmemme. Pinout dị n'okpuru na-egosi akara ọdụ ụgbọ mmiri RS232.

Jikọọ EX-RC1 na netwọk CANbus

• Jikọọ ihe nkwụnye EX-RC1 na OPLC dịka egosiri n'okpuru. Modul a na-ekwurịta okwu site na ụkpụrụ UniCAN nwe nke Unitronics. UniCAN nwere ike ịnwe ihe ruru ọnụ 60, gụnyere PLCs na EX-RC1 ihe nkwụnye I/O dịpụrụ adịpụ.
• Ọdụ ụgbọ mmiri CANbus dịpụrụ adịpụ nke ukwuu.

CANbus Wiring

• Ndị na-akwụsị netwọkụ: Debe nkwụsịtụ na njedebe ọ bụla nke netwọk CANbus.
• Ekwesịrị ịtọ nguzogide ka ọ bụrụ 1%, 121Ω, 1/4W.
• Jikọọ mgbaàmà ala na ụwa naanị otu ebe, n'akụkụ ọkụ ọkụ.
• Ọdụdọ ike netwọkụ ekwesịghị ịdị na njedebe nke netwọkụ.

  

Njikọ CANbus

Nhazi netwọkụ

EX-RC1 na-enyere gị aka ịchọta I/Os dịpụrụ adịpụ ruo otu kilomita site na PLC. Ị nwere ike ịgụnye ma PLC na nkwụnye ọkụ na netwọk UniCAN, ruo ngụkọta nke ọnụ 1.

Nkọwa nka nka EX-RC1

• I/O modul ike: Ruo 8 I / O modul nwere ike jikọọ na otu nkwụnye. Ọnụọgụ nke I/O nwere ike ịdịgasị iche dịka modul siri dị.
• Ịnye ọkụ: 12VDC ma ọ bụ 24VDC
• Oke ekwenyere: 10.2 ka 28.8VDC
• Ugbu a na-adịghị agwụ agwụ: 90mA @ 12VDC; 50mA @ 24VDC
• Oke. oriri ugbu a: 650mA @ 12VDC; 350mA @ 24VDC
• Ọdịnaya dị ugbu a maka modul I/O: 800mA kacha site na 5V. Lee ndetu 1
• Ngosipụta ọnọdụ
  • (PWR) Green LED - na-enwu mgbe enyere ike.
  • (M/O COMM.) Green LED- Na-enwu mgbe emebere nkwurịta okwu n'etiti nkwụnye ọkụ na nkeji ndị ọzọ. Na-anya ọkụ 0.5sec NA 0.5sec gbanyụrụ mgbe ihe nkwụnye ọkụ nọ na ọnọdụ Kwụsị.
  • (Bus COMM.) Green LED- Na-enwu mgbe emebere nkwukọrịta n'etiti nkwụnye na OPLC.
    Ihe ndetu
    Example: 2 IO-DI8-TO8 nkeji na-eri kacha nke 140mA nke 5VDC wetara site nkwụnye.

Nkwukọrịta

• RS232 ọdụ ụgbọ mmiri: 1
  • Mwepu Galvanic: Mba
  • Voltage ókè: 20V
  • Ogologo eriri USB: Ruo 15m (50')
• CANbus ọdụ ụgbọ mmiri 1
  • Ọnụ ụzọ 60
  • Ike chọrọ 24VDC (± 4%), 40mA max. kwa unit
  • Mwepu nke Galvanic Ee, n'etiti CANbus na nkwụnye
  • Ụdị eriri Agbagọ-ụzọ; A na-atụ aro eriri ụzọ igwe gbagọrọ agbagọ nke DeviceNet®.
  • Ogologo eriri USB/ọnụego baud
    • 25 m: 1 Mbit/s
    • 100 m: 500 Mbit/s
    • 250 m: 250 Mbit/s
    • 500 m: 125 Mbit/s
    • 500 m: 100 Mbit/s
    • 1000 m: 50 Mbit/s
    • 1000 m: 20 Mbit/s

gburugburu ebe obibi

• Ọnọdụ okpomọkụ na-arụ ọrụ 0 ruo 50C (32 ruo 122F)
• Ọnọdụ nchekwa -20 ruo 60C (-4 ruo 140F)
• Iru mmiri dị ala (RH) 5% ruo 95% (na-abụghị condensing)
• Akụkụ (WxHxD) 80mm x 93mm x 60mm (3.15" x 3.66" x 2.36")
• Ibu 135g (4.76 oz.)
• Ịkwanye Ma na DIN-rail 35mm ma ọ bụ kposara-ndokwasa.

Banyere ụlọ ọrụ

• Ozi dị na akwụkwọ a na-egosipụta ngwaahịa na ụbọchị mbipụta. Unitronics na-edobe ikike, dabere na iwu niile dị, n'oge ọ bụla, na ikike ya, na-enweghị ọkwa, ịkwụsị ma ọ bụ gbanwee atụmatụ, atụmatụ, ihe na nkọwapụta ngwaahịa ya, yana ma ọ bụ na-adịgide adịgide ma ọ bụ nwa oge wepụ ihe ọ bụla. ndị na-apụ apụ n'ahịa.
• Enyere ozi niile dị n'ime akwụkwọ a “dị ka ọ dị” na-enweghị ikike ụdị ọ bụla, ma ọ bụ ekwupụta ma ọ bụ akọwapụta ya, gụnyere mana ọnweghị oke na ikike azụmaahịa ọ bụla egosipụtara, mma maka otu ebumnuche, ma ọ bụ enweghị mmebi iwu. Unitronics anaghị eburu ibu ọrụ maka mmejọ ma ọ bụ mwepu na ozi ewepụtara na akwụkwọ a. Ọ nweghị ihe ọ bụla Unitronics ga-akwụ ụgwọ maka mmebi ọ bụla pụrụ iche, mberede, na-apụtaghị ìhè ma ọ bụ nke ga-akpatara ụdị ọ bụla, ma ọ bụ mmebi ọ bụla sitere na ma ọ bụ na njikọ iji ma ọ bụ arụmọrụ nke ozi a.
• Aha ụghalaahịa, ụghalaahịa, akara ngosi na akara ọrụ ewepụtara n'akwụkwọ a, gụnyere imewe ha, bụ ihe onwunwe nke Unitronics (1989) (R”G) Ltd. ma ọ bụ ndị ọzọ ọzọ ma enyeghị gị ikike iji ha na-enweghị nkwenye ederede mbụ. nke Unitronics ma ọ bụ ndị ọzọ nwere ike ịnwe ha.

Akwụkwọ / akụrụngwa

UNITRONICS EX-RC1 Ntinye aka ma ọ bụ ihe nrụpụta [pdf] Ntuziaka onye ọrụ EX-RC1, ihe ntinye aka ma ọ bụ ihe nrụpụta, EX-RC1 ihe nkwụnye ihe ntanetị ma ọ bụ ihe nkwụnye ihe, ihe nkwụnye ọkụ, ihe nkwụnye ọkụ, ihe nkwụnye ọkụ

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ