UNITRONICS EX-RC1 Input Nesa ko Adaftar fitarwa

EX-RC1 Jagorar Mai Amfani

EX-RC1 adaftar I/O ce mai nisa wacce ke ba da damar sadarwa tsakanin Unitronics Vision OPLCs da Modulolin Faɗawa I/O na nesa a cikin tsarin ku. Ana haɗa wannan adaftan zuwa PLC ta hanyar CANbus kuma ana iya haɗa shi zuwa Modules Expansion Modules 8 I/O. Cibiyar sadarwa na iya haɗawa har zuwa nodes 60, gami da PLCs da masu adaftar, sadarwa ta hanyar UniCAN – Unitronics' na mallakar CANbus yarjejeniya.

Fahimtar Abunda

EX-RC1 na iya ko dai a ɗora shi a kan dogo na DIN ko kuma a ɗaure shi a kan faranti mai hawa. Gane bangaren shine:

1. Alamun matsayi
2. PC zuwa EX-RC1 tashar haɗin gwiwa
3. Wuraren haɗin wutar lantarki
4. EX-RC1
   

   to fadada module dangane tashar jiragen ruwa

5. CANbus tashar jiragen ruwa
6. Sauyawa DIP - ID na hanyar sadarwa, CANbus

Umarnin Amfani da samfur

• Kafin amfani da EX-RC1, yana da mahimmanci don karantawa da fahimtar littafin mai amfani da takaddun rakiyar. An yi nufin wannan samfurin don amfani da horarwa da ƙwararrun ma'aikata waɗanda suka saba da ƙa'idodin lantarki na gida da na ƙasa.
• Lokacin shigar da na'urar, yana da mahimmanci don tabbatar da cewa ba a shigar da ita a wuraren da ke da ƙura mai ƙura ko ƙura, gurɓataccen gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza tasiri na yau da kullun, ko firgita. Da zarar an shigar, ya kamata a bi jagororin masu zuwa:
  • Bincika shirin mai amfani kafin gudanar da shi
  • Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini
  • Shigar da na'urar da'ira ta waje kuma ɗauki matakan tsaro masu dacewa game da gajeriyar kewayawa a cikin wayoyi na waje
  • Don guje wa lalata tsarin, kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne
• Ana gudanar da EX-RC1 ta aikace-aikacen da aka shigar da masana'anta kuma yana iya ganowa ta atomatik I/O Fadada Modules na dijital. Koyaya, idan tsarin ya ƙunshi nau'ikan analog, aikace-aikacen dole ne a gyara shi. Don ƙarin bayani, koma zuwa batutuwan I/O Nesa a cikin tsarin Taimakon VisiLogic.
• Gabaɗaya, EX-RC1 wani muhimmin sashi ne don sadarwa tsakanin Unitronics Vision OPLCs da Modulolin Fadada I/O mai nisa, kuma idan aka yi amfani da su daidai, na iya taimakawa tabbatar da aminci da ingantaccen aiki na tsarin ku.

GAME DA KYAUTA

• Abubuwan mu'amala na EX-RC1 tsakanin Unitronics Vision OPLCs da Modulolin Fadada I/O na nesa waɗanda aka rarraba cikin tsarin ku.
• Ana haɗa adaftar zuwa PLC ta CANbus. Ana iya haɗa kowane adaftar zuwa Modulolin Fadada I/O 8. Cibiyar sadarwa na iya ƙunsar har zuwa nodes 60, gami da PLCs da adaftar; lura cewa dole ne PLC ta ƙunshi tashar CANbus. Sadarwa ta hanyar UniCAN, ka'idar CANbus ta Unitronics.
• Ana gudanar da EX-RC1 ta aikace-aikacen da aka shigar da masana'anta. Adaftan na iya gano nau'ikan Faɗawar I/O na dijital ta atomatik. Idan tsarin ya ƙunshi nau'ikan analog, aikace-aikacen dole ne a gyara shi. Don ƙarin bayani koma zuwa batutuwan I/O Nesa a cikin tsarin Taimakon VisiLogic.
• EX-RC1 na iya ko dai a ɗora shi a kan titin dogo na DIN, ko kuma a ɗora shi a kan faranti mai hawa.

Gane bangaren

1	Alamun matsayi
2	PC zuwa EX-RC1 tashar haɗin gwiwa
3	Wuraren haɗin wutar lantarki
4	EX-RC1 zuwa tashar haɗin haɗin haɗin gwiwa
5	CANbus tashar jiragen ruwa
6	Farashin DIP

• Kafin amfani da wannan samfur, alhakin mai amfani ne ya karanta da fahimtar wannan daftarin aiki da duk wani takaddun da ke biye.
• Duk examples da zane-zane da aka nuna a nan an yi su ne don taimakawa fahimta, kuma ba su da garantin aiki. Unitronics ba ya karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples.
• Da fatan za a zubar da wannan samfurin daidai da ƙa'idodi da ƙa'idodi na gida da na ƙasa.
• ƙwararrun ma'aikatan sabis ne kawai ya kamata su buɗe wannan na'urar ko su yi gyara.

Tsaron mai amfani da jagororin kariyar kayan aiki

• Wannan takarda an yi niyya ne don taimaka wa ƙwararrun ƙwararrun ma'aikata a cikin shigar da wannan kayan aikin kamar yadda umarnin Turai na injiniyoyi suka ayyana, low vol.tage, da EMC. Mai fasaha ko injiniya ne kawai wanda ya horar da ma'aunin lantarki na gida da na ƙasa ya kamata ya yi ayyukan da ke da alaƙa da na'urar lantarki.
• Ana amfani da alamomin don haskaka bayanan da suka shafi amincin mai amfani da kariyar kayan aiki a cikin wannan takaddar.
• Lokacin da waɗannan alamomin suka bayyana, dole ne a karanta bayanan haɗin gwiwa a hankali kuma a fahimce su sosai.

  

  • Rashin bin ƙa'idodin aminci masu dacewa na iya haifar da mummunan rauni na mutum ko lalacewar dukiya. Koyaushe yi taka tsantsan yayin aiki da kayan lantarki.
  • Bincika shirin mai amfani kafin gudanar da shi.
  • Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini.
  • Shigar da na'urar da'ira ta waje kuma ɗauki matakan tsaro masu dacewa game da gajeriyar kewayawa a cikin wayoyi na waje.
  • Don guje wa lalata tsarin, kar a haɗa / cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli

• Kar a sanyawa a cikin wuraren da: ƙura mai wuce gona da iri, gurɓataccen iskar gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza ta yau da kullun ko firgita.
• Bar mafi ƙarancin sarari na 10mm don samun iska tsakanin saman sama da gefen ƙasa na na'urar da bangon shinge.
• Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
• Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.

Farashin UL

• Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.
• Samfura masu zuwa: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8,
  IO-DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X an jera UL don wurare masu haɗari.
• Samfura masu zuwa: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IOAI4-AO2, IO-AI4-AO2-B, IO-AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-L, IO-DI8 RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO-LC3, IO-PT4, IOPT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X, EX-RC1 an jera UL don Wuri na Musamman.

Ƙididdigar UL, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu Haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.

Tsanaki

• Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wurare marasa haɗari kawai.
• Wayoyin shigarwa da fitarwa dole ne su kasance daidai da Class I, hanyoyin wayoyi na Division 2 kuma daidai da ikon da ke da iko.
•  GARGADI — Fashewa Hazard-masanin abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
• GARGADI – HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
• GARGADI - Bayyanawa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
• Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.

Ƙimar Juriya na Relay

• Samfuran da aka jera a ƙasa sun ƙunshi abubuwan da aka fitar:
• Abubuwan haɓaka shigarwa / fitarwa, Samfura: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L
• Lokacin da aka yi amfani da waɗannan takamaiman samfuran a wurare masu haɗari, ana ƙididdige su a 3A res, lokacin da ake amfani da waɗannan takamaiman samfuran a cikin yanayin muhalli marasa haɗari, ana ƙididdige su a 5A res, kamar yadda aka bayar a cikin ƙayyadaddun samfurin.

Hawan Module

DIN-dogo hawa
Dauke na'urar a kan layin dogo na DIN kamar yadda aka nuna a ƙasa; Module ɗin zai kasance daidai a kan layin dogo na DIN.

Screw-Mounting

• Ba a zana hoton da ke ƙasa zuwa sikeli ba. Ana iya amfani da shi azaman jagora don dunƙule-hawan module.
• Nau'in hawa dunƙule: ko dai M3 ko NC6-32.

  

Saita lambar ID na Unit

• Adadin lambar ID yana daga 1 zuwa 60.
• Saitunan sauyawa na DIP suna wakiltar lambar ID azaman ƙimar binary kamar yadda aka nuna a cikin waɗannan adadi.

  

Haɗa Modulolin Faɗawa

Adafta yana ba da haɗin kai tsakanin OPLC da tsarin haɓakawa. Don haɗa tsarin I/O zuwa adaftar ko zuwa wani tsarin:

1. Tura mai haɗa module-zuwa-module cikin tashar tashar da ke gefen dama na na'urar.
   Lura cewa akwai hular kariya da aka tanada tare da adaftan. Wannan hular tana rufe tashar tashar I/O module ta ƙarshe a cikin tsarin.
   Don guje wa lalata tsarin, kar a haɗa ko cire haɗin na'urar lokacin da wuta ke kunne.

Gane bangaren

1	Module-zuwa-module mai haɗawa
2	hular kariya

Waya

• Kar a taɓa wayoyi masu rai.
• Kada a haɗa fil ɗin da ba a yi amfani da shi ba. Yin watsi da wannan umarnin na iya lalata na'urar.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.
• Kar a haɗa siginar 'Neutral ko' Layi' na 110/220VAC zuwa fil ɗin 0V na na'urar.
• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.
•  Sau biyu duba duk wayoyi kafin kunna wutar lantarki.

Hanyoyin Waya

• Yi amfani da crimp tashoshi don wayoyi; yi amfani da 26-14 AWG waya (0.13 mm 2-3.31 mm2) don duk dalilai na wayoyi.
  1. Cire waya zuwa tsayin 7± 0.5mm (0.250-0.2.08 inci).
  2. Cire tashar zuwa mafi girman matsayi kafin saka waya.
  3. Saka waya gaba daya a cikin tashar don tabbatar da cewa za a iya yin haɗin da ya dace.
  4. Maƙarƙashiya don kiyaye waya daga ja kyauta.
• Don guje wa lalata waya, kar a wuce iyakar ƙarfin 0.5 N·m (5 kgf·cm).
• Kada a yi amfani da gwangwani, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Wutar Wutar Lantarki

Haɗa kebul na "tabbatacce" zuwa tashar "+V", da "mara kyau" zuwa tashar "0V".

Ƙaddamar da Wutar Lantarki
Don haɓaka aikin tsarin, guje wa tsangwama ta hanyar:

• Hawan module a kan wani karfe panel.
• Ƙaddamar da wutar lantarki ta module: haɗa ƙarshen waya 14 AWG zuwa siginar chassis; haɗa sauran ƙarshen zuwa panel.
  Lura: Idan za ta yiwu, wayar da ake amfani da ita don ƙasa wutar lantarki kada ta wuce 10 cm tsayi. Koyaya, ana ba da shawarar yin ƙasa da tsarin a kowane yanayi.

  

Sadarwa

Haɗa EX-RC1 zuwa PC
Haɗa PC zuwa adaftar ta hanyar kebul na shirye-shirye. Wurin da ke ƙasa yana nuna alamun tashar jiragen ruwa na RS232.

Haɗa EX-RC1 zuwa cibiyar sadarwar CANbus

• Haɗa adaftar EX-RC1 zuwa OPLC kamar yadda aka nuna a ƙasa. Samfurin yana sadarwa ta hanyar ka'idar UniCAN ta mallaka ta Unitronics. UniCAN na iya ƙunsar har zuwa nodes 60, gami da PLCs da EX-RC1 adaftan I/O mai nisa.
• Tashar jiragen ruwa ta CANbus ta keɓe.

CANbus Wiring

• Ƙarshen hanyar sadarwa: Sanya masu ƙarewa a kowane ƙarshen hanyar sadarwar CANbus.
• Dole ne a saita juriya zuwa 1%, 121Ω, 1/4W.
• Haɗa siginar ƙasa zuwa ƙasa a wuri ɗaya kawai, kusa da wutar lantarki.
• Ba dole ba ne wutar lantarki ta hanyar sadarwa ta kasance a ƙarshen hanyar sadarwa.

  

CANbus Connector

Tsarin hanyar sadarwa

EX-RC1 yana ba ku damar gano I/Os mai nisa har zuwa kilomita 1 daga PLC. Kuna iya haɗa PLCs da adaftar a kan hanyar sadarwar UniCAN, har zuwa jimlar nodes 60.

Bayanin Fasaha na EX-RC1

• I/O module iya aiki: Har zuwa 8 I/O modules za a iya haɗa su zuwa adaftan guda ɗaya. Yawan I/Os na iya bambanta bisa ga tsarin.
• Tushen wutan lantarki: 12VDC ko 24VDC
• Kewayon halatta: 10.2 zuwa 28.8VDC
• Kwanciyar halin yanzu: 90mA@12VDC; 50mA@24VDC
• Max. amfani na yanzu: 650mA @ 12VDC; 350mA @ 24VDC
• Abubuwan da ake bayarwa na yanzu don samfuran I/O: Matsakaicin 800mA daga 5V. Duba bayanin kula 1
• Alamun matsayi
  • (PWR) Green LED- Yana kunna lokacin da aka samar da wutar lantarki.
  • (I/O COMM.) Green LED- Yana kunna lokacin da aka kafa sadarwa tsakanin adaftan zuwa sauran raka'a. Kiyaye 0.5sec ON 0.5sec lokacin da adaftar ke cikin Yanayin Tsaya.
  • (Bas COMM.) Green LED- Lit lokacin da aka kafa sadarwa tsakanin adaftan da OPLC.
    Bayanan kula
    Example: 2 IO-DI8-TO8 raka'a suna cinye iyakar 140mA na 5VDC wanda adaftar ke bayarwa.

Sadarwa

• RS232 tashar jiragen ruwa: 1
  • Warewa Galvanic: A'a
  • Voltage iyaka: 20V
  • Tsawon kebul: Har zuwa 15m (50')
• CANbus tashar jiragen ruwa 1
  • Nodes 60
  • Bukatun wutar lantarki 24VDC (± 4%), 40mA max. kowace raka'a
  • Galvanic kadaici Ee, tsakanin CANbus da adaftar
  • Nau'in kebul Tsuntsaye-biyu; DeviceNet® mai kauri mai kauri mai kauri mai murɗaɗɗen kebul ana shawarar.
  • Tsawon kebul / ƙimar baud
    • 25m: 1Mbit/s
    • 100m: 500Mbit/s
    • 250m: 250Mbit/s
    • 500m: 125Mbit/s
    • 500m: 100Mbit/s
    • 1000m: 50Mbit/s
    • 1000m: 20Mbit/s

Muhalli

• Yanayin aiki 0 zuwa 50C (32 zuwa 122F)
• Yanayin ajiya -20 zuwa 60C (-4 zuwa 140F)
• Dangantakar Humidity (RH) 5% zuwa 95% (ba mai tauri)
• Girma (WxHxD) 80mm x 93mm x 60mm (3.15" x 3.66" x 2.36")
• Nauyi 135g (4.76 oz.)
• Yin hawa Ko dai a kan 35mm DIN-rail ko dunƙule-saka.

GAME DA KAMFANI

• Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci janye kowane daga cikinsu. da forgoing daga kasuwa.
• Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyanawa ko bayyananne, gami da amma ba'a iyakance ga kowane garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanan da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin.
• Sunayen kasuwanci, alamun kasuwanci, tambura da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izini na farko ba. na Unitronics ko wani ɓangare na uku wanda zai iya mallake su.

Takardu / Albarkatu

UNITRONICS EX-RC1 Input Nesa ko Adaftar fitarwa [pdf] Jagorar mai amfani EX-RC1.

Magana

• Manual mai amfani