UCTRONICS RM0004 Pi Rack Pro maka ntuziaka nwụnye Raspberry Pi 4B
Kwado i2c1 wee tọọ ọsọ
sudo nano /boot/config.txt Tinye iwu na-esonụ na /boot/config.txt file: dtparam=i2c_arm=na,i2c_arm_baudrate=400000
Chekwa ma pụọ.
Tinye ọrụ nkwụsị
Pịa bọtịnụ ike wee hazie script na-esonụ ka iji ọrụ nkwụsịtụ nchekwa.
sudo nano /boot/config.txt
Tinye iwu a na /boot/config.txt file:
dtoverlay = gpio-emechi, gpio_pin = 4, active_low = 1, gpio_pull = elu
Chekwa ma pụọ, wee malitegharịa:
sudo reboot
Hazie edemede mmalite akwụkwọ ntuziaka
Clone SKU_RM0004 ọba akwụkwọ
git clone https://github.com/UCTRONICS/SKU RM0004.git
Gbakọta
cd SKU RM0004
mee
Gbaa ọsọ
./ ngosi
Mgbe ahụ Tinye edemede mmalite akpaka
Mepee rc.local file
sudo nano /etc/rc.local
Tinye iwu na0 nke rc. mpaghara file
cd /home/pi/SKU RM0004
mee ka ọ dị ọcha
mee
./ ngosi &
Chekwa ma pụọ, wee malitegharịa: sudo reboot
Nwee obi ụtọ
Ugbu a, ahaziri ihe ngosi OLED gị ka ọ gosipụta IP/CPU/RAM/DISK/TEMP, ka ị na-anụ ụtọ mmechi na ịgbanye naanị site na ịpị bọtịnụ mgbanyụ / gbanyụọ.
Ọdịnaya ngwugwu
NKWUKWU VIEW
Ịwụnye
KPỌTỤRỤ ANYỊ
Ọ bụrụ na nsogbu ọ bụla, nweere onwe gị ịkpọtụrụ anyị.
Websaịtị: www.uctronics.com
Embail: support@uctronics.com
Akwụkwọ / akụrụngwa
 |
UCTRONICS RM0004 Pi Rack Pro maka Raspberry Pi 4B [pdf] Ntuziaka nwụnye RM0004 Pi Rack Pro maka Raspberry Pi 4B, RM0004, Pi Rack Pro maka Raspberry Pi 4B, Raspberry Pi 4B |
