Mgbakọ ụyọkọ Raspberry Pi UCTRONICS
Ihe ngwugwu
 8cmx8cm onye ofufe x2 |
 Akụkụ akụkụ x2 |
 Ogwe kacha elu x1c |
 Raspberry Pi baseplate x4 |
 Fans gbagwojuru anya x1 |
 Countersunk skru maka elu panel na RPi baseplates (M2.5*4) x 12 |
 Fan kposara x8 |
 Mkpọsa isi okirikiri maka bọọdụ RPi (M2.5*4) x 16 |
Gbawara view
Nzọụkwụ Mgbakọ
- Kwado oghere ndị na-arị elu nke onye ofufe na ndị dị n'akụkụ akụkụ, ma dozie ya na skru 4 fan na etiti etiti;
- Hazie oghere ndị na-arị elu nke fan baffle na ndị dị n'akụkụ akụkụ, ma dozie baffle fan na skru 4 n'akụkụ anọ.
- Kwado oghere ndị na-ebuli elu nke elu elu na ndị dị n'akụkụ abụọ, ma dozie ya na skru countersunk;
- Fanye Raspberry Pi baseplate, wee dozie ya na skru M2.5.
Wiring
Onye na-akwado SPEC
| Nrụ ọrụ Voltage | DCSV |
| Na-arụ ọrụ ugbu a | 0.3A |
| Oriri ike | 1.sw |
| Ọsọ | 2875 ± 5% RPM |
| Nha | 80'80'15mm |
| Ibu | 44.2g |
Akwụkwọ / akụrụngwa
 |
Mgbakọ ụyọkọ Raspberry Pi UCTRONICS [pdf] Akwụkwọ ntuziaka onye ọrụ UCTRONICS, U6183, Raspberry, Pi, ụyọkọ, Mgbakọ |
