UCTRONICS RM0004 Pi Rack Pro no Raspberry Pi 4B Ke alakaʻi hoʻonohonoho
E ho'ā i ka i2c1 a hoʻonohonoho i ka wikiwiki
sudo nano /boot/config.txt Hoʻohui i kēia kauoha i /boot/config.txt file: dtparam=i2c_arm=on,i2c_arm_baudrate=400000
E mālama a puka i waho.
Hoʻohui i ka hana pani
E kaomi i ke pihi mana a laila e hoʻonohonoho i kēia ʻatikala e hoʻohana i ka hana pani palekana.
sudo nano /boot/config.txt
Hoʻohui i kēia kauoha i ka /boot/config.txt file:
dtoverlay=gpio-shutdown,gpio_pin=4,active_low=1,gpio_pull=up
Mālama a haʻalele, a laila hoʻomaka hou:
sudo reboot
E hoʻonohonoho i ka palapala hoʻomaka manual
Clone SKU_RM0004 waihona
git clone https://github.com/UCTRONICS/SKU RM0004.git
Hoʻopili
cd SKU RM0004
hana
Holo
./hōʻike
A laila Hoʻohui i ka palapala hoʻomaka ʻakomi
E wehe i ka rc.local file
sudo nano /etc/rc.local
Hoʻohui i ke kauoha i ka0of the rc.local file
cd /home/pi/SKU RM0004
e hoomaemae
hana
./hōʻike &
Mālama a haʻalele, a laila hoʻomaka hou: sudo reboot
Nanea
I kēia manawa ua hoʻonohonoho ʻia kāu hōʻike OLED e hōʻike i ka IP/CPU/RAM/DISK/TEMP, ʻoiai e leʻaleʻa ana i ka pani palekana a me ka mana me ke kaomi wale ʻana i ke pihi on/off.
NUI PAKE
HOOPAUIA VIEW
HOOLAHA
KĀHEA IĀ MĀ˚OU
Inā pilikia kekahi, e ʻoluʻolu e kelepona mai iā mākou.
Webkahua: www.healani.com
Embail: support@uctronics.com
Palapala / Punawai
 |
UCTRONICS RM0004 Pi Rack Pro no Raspberry Pi 4B [pdf] Alakaʻi hoʻokomo RM0004 Pi Rack Pro no Raspberry Pi 4B, RM0004, Pi Rack Pro no Raspberry Pi 4B, Raspberry Pi 4B |
