Akwụkwọ ntuziaka ntuziaka DELTA DVP-EH Series Programmable Logic Controllers
Mpempe akwụkwọ ntuziaka a na-enye naanị nkọwa maka nkọwa ọkụ eletrik, nkọwapụta n'ozuzu, ntinye & wiring. Ozi ndị ọzọ gbasara mmemme na ntinye akwụkwọ, biko hụ "Akwụkwọ ntuziaka ngwa DVP-PLC: Programming". Maka ozi ndị ọzọ gbasara mpaghara nhọrọ, biko hụ mpempe akwụkwọ ntuziaka ngwaahịa ma ọ bụ “Akwụkwọ ntuziaka Ngwa DVP-PLC: Module I/O Pụrụ Iche”. Usoro nhazi usoro DVP-EH na-enye 8 ~ 48 isi na ntinye / mmepụta kachasị nwere ike ịgbatị ruo 256 isi.
DVP-EH DIDO bụ ngwaọrụ emeghere ya mere ekwesịrị itinye ya n'ime ogige na-enweghị uzuzu ikuku, iru mmiri, ujo eletrik na ịma jijiji. Ihe mkpuchi ahụ kwesịrị igbochi ndị ọrụ anaghị arụ ọrụ ngwaọrụ ahụ (dịka igodo ma ọ bụ ngwaọrụ dị iche iche achọrọ maka ịrụ ebe nchekwa ahụ) ma ọ bụrụ na ihe egwu na mmebi dị na ngwaọrụ ahụ nwere ike ime.
Ejikọtala ọkụ sekit isi AC na ọdụ ntinye/mpụta ọ bụla, ma ọ bụ ọ nwere ike imebi PLC. Lelee wiwi niile tupu ịgbanye ọkụ. Iji gbochie mkpọtụ electromagnetic ọ bụla, gbaa mbọ hụ na PLC agbaala nke ọma. Emetụla ọnụ ọnụ mgbe ịgbanyere ọkụ.
Ngwaahịa Profile & Akụkụ
| Aha nlereanya | 08HM
11N |
16HM
11N |
08HN
11R/T |
16HP
11R/T |
32HM
11N |
32HN
00R/T |
32HP
00R/T |
48HP
00R/T |
| W | 40 | 55 | 40 | 55 | 143.5 | 143.5 | 143.5 | 174 |
| H | 82 | 82 | 82 | 82 | 82.2 | 82.2 | 82.2 | 82.2 |
| Ụdị | | ‚ | | ‚ | ƒ | ƒ | ƒ | ƒ |
| 1. Ike, ihe ngosi LV | 5. eriri ndọtị | 9. Mkpuchi |
| 2. I/O ọnụ | 6. Mkpuchi ọdụ ụgbọ mmiri ndọtị | 10. Ihe ngosi ntinye |
| 3. DIN okporo ígwè clip | 7. Direct arịọnụ oghere | 11. Output indicators |
| 4. DIN rail | 8. Aha nlereanya |
Nkọwapụta ọkụ eletrik
| Nlereanya
Ihe |
08HM11N
16HM11N 32HM11N |
08HN11R
08HP11T |
08HP11R
08HP11T |
16HP11R
16HP11T |
32HN00R
32HN00T |
32HP00R
32HP00T |
48HP00R
48HP00T |
| Ịnye ọkụ voltage | 24VDC (20.4 ~ 28.8VDC) (-15% ~ 20%) | 100-240VAC (-15% ~ 10%),
50/60Hz ± 5% |
|||||
| Ike fuse | 2A/250VAC | ||||||
| Oriri ike | 1W/1.5W
/ 3.9W |
1.5W | 1.5W | 2W | 30VA | 30VA | 30VA |
| DC24V mmepụta ugbu a | NA | NA | NA | NA | NA | 500mA | 500mA |
| Nchekwa ọkọnọ ike | DC24V mmepụta mkpụmkpụ sekit nchebe | ||||||
| Voltagiguzogide | 1,500VAC (Primary-secondary), 1,500VAC (Primary-PE), 500VAC (Secondary-PE) | ||||||
| Nguzogide mkpuchi | > 5MΩ na 500VDC (n'etiti isi I/O na ala) | ||||||
|
Mgbochi mkpọtụ |
ESD: 8KV Ikuku ikuku
EFT: Ahịrị ike: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 250V Digital I/O: 1KV, RS: 26MHz ~ 1GHz, 10V/m |
||||||
|
Nda ala |
Dayameta nke waya n'ala ekwesịghị ịbụ ihe na-erughị nke L, N nke ọkụ ọkụ. (Mgbe ọtụtụ PLC na-eji n'otu oge, biko jide n'aka na PLC ọ bụla dabara nke ọma.) | ||||||
| Ọrụ / nchekwa | Ọrụ: 0°C ~ 55°C (okpomọkụ), 5 ~ 95% (iru mmiri), ogo mmetọ 2 Nchekwa: -25°C ~ 70°C (okpomọkụ), 5 ~ 95% (iru mmiri) | ||||||
| Mgbochi ịma jijiji/ ịma jijiji | Ụkpụrụ mba ụwa: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea) | ||||||
| Ibu (g) | 124/160/
355 |
130/120 | 136/116 | 225/210 | 660/590 | 438/398 | 616/576 |
| Nkwenye | |||||||
| Ebe ntinye | ||
| Ụdị ntinye ntinye | DC | |
| Ụdị ntinye | DC (SINK ma ọ bụ isi mmalite) | |
| Tinye ugbu a | 24VDC 5mA | |
| Active level | Gbanyụọ →Gbanyere | karịa 16.5VDC |
| Gbanyụọ → Gbanyụọ | n'okpuru 8VDC | |
| Oge nzaghachi | Ihe dịka 20ms | |
| Kewapụ sekit
/ egosi ọrụ |
Igwe foto/LED agbanyere | |
| Ebe mmepụta | |||
| Ụdị ihe mmepụta | Relay-R | Transistor-T | |
| Voltage nkọwapụta | N'okpuru 250VAC, 30VDC | 30VDC | |
|
Ibu kacha |
Nguzogide |
1.5A/1 isi (5A/COM) |
55°C 0.1A/1 ntụpọ, 50°C 0.15A/1 ntụpọ,
45°C 0.2A/1 ntụpọ, 40°C 0.3A/1 ntụpọ (2A/COM) |
| Odighi uche | #1 | 9W (30VDC) | |
| Lamp | 20WDC/100WAC | 1.5W (30VDC) | |
| Oge nzaghachi | Gbanyụọ →Gbanyere |
Ihe dịka 10ms |
15m |
| Gbanyụọ → Gbanyụọ | 25m | ||
#1: Usoro ndụ
Modul ntinye/mpụta dijitalụ
|
Nlereanya |
Ike |
Ngalaba ntinye | Ngalaba mmepụta | ||
| Isi ihe | Ụdị | Isi ihe | Ụdị | ||
| DVP08HM11N |
24VDC |
8 |
Ụdị Sink/Isi iyi DC |
0 |
N/A |
| DVP16HM11N | 16 | 0 | |||
| DVP32HM11N | 32 | 0 | |||
| DVP08HN11R | 0 | 8 |
Ntugharị: 250VAC/30VDC 2A/1 ntụpọ |
||
| DVP08HP11R | 4 | 4 | |||
| DVP16HP11R | 8 | 8 | |||
| DVP08HN11T | 0 | 8 |
Transistor: 5 ~ 30VDC 0.3A/1 ntụpọ na 40°C |
||
| DVP08HP11T | 4 | 4 | |||
| DVP16HP11T | 8 | 8 | |||
| DVP32HN00R |
100 ~ 240V AC |
0 | 32 |
Ntugharị: 250VAC/30VDC 2A/1 ntụpọ |
|
| DVP32HP00R | 16 | 16 | |||
| DVP48HP00R | 24 | 24 | |||
| DVP32HN00T | 0 | 32 |
Transistor: 5 ~ 30VDC 0.3A/1 isi na 40°C |
||
| DVP32HP00T | 16 | 16 | |||
| DVP48HP00T | 24 | 24 | |||
Nwụnye
| Biko tinye PLC n'ime mkpuchi nwere ohere zuru oke gburugburu ya iji kwe ka ikpochapụ okpomọkụ, dị ka egosiri na foto a.
⚫ Nrịgo ozugbo: Biko jiri skru M4 dabere na akụkụ ngwaahịa ahụ. |
| ⚫ DIN Rail mgbakwasa: Mgbe ị na-ebunye PLC na 35mm DIN |
| okporo ígwè, jide n'aka na ị na-eji clip njigide iji kwụsị mmegharị ọ bụla n'akụkụ gaa n'akụkụ nke PLC ma belata ohere nke wires na-atọhapụ. Mpempe akwụkwọ ndowe dị na ala PLC. Iji chekwaa PLC na ụgbọ okporo ígwè DIN, wetuo obere vidiyo ahụ, tinye ya n'ụgbọ okporo ígwè wee jiri nwayọọ kpalie ya elu. Iji wepu PLC, were screwdriver dị larịị wetuo obere ihe ndowe ala wee jiri nwayọ
wepụ PLC na DIN okporo ígwè, dị ka e gosiri na ọnụ ọgụgụ. |
Wiring
| 1. Jiri O-ụdị ma ọ bụ Y-ụdị ọnụ. Hụ ọnụ ọgụgụ dị n'akụkụ aka nri maka nkọwapụta ya. Ekwesịrị imechi skru ọnụ PLC ruo 9.50kg-cm (8.25 in-Ibs)
ma biko jiri naanị onye nduzi ọla kọpa 60/75ºC. |
N'okpuru
6.2 mm Ka dabara na M3.5 ịghasa ọnụ N'okpuru 6.2 mm |
- Ekwela waya efu Edokwala eriri mgbama ntinye na eriri ike mmepụta n'otu sekit wiring.
- Atụbala obere ihe ntụzi ọla n'ime PLC ka ị na-akpụgharị ma dọkasịa ihe mmado dị na oghere ikposa ọkụ maka igbochi ihe ndị ọzọ ịbanye na ya, iji hụ na mwepu ọkụ nke PLC kwesịrị ekwesị.
Usoro Usoro akara I/O
Mgbe ị na-ejikọ MPU na ihe na-erughị isi 32 na ngalaba ndọtị, ọnụọgụ ntinye nke nkeji ndọtị 1 ga-amalite site na X20 n'usoro wee malite nọmba mmepụta site na Y20 n'usoro. Ọ bụrụ na ijikọ MPU na ihe karịrị isi 32 na ngalaba ndọtị, a na-amalite nọmba ntinye nke nkeji ndọtị nke mbụ site na ntinye ikpeazụ nke MPU n'usoro ma malite nọmba mmepụta bụ nọmba mmepụta ikpeazụ nke MPU n'usoro. Ngwa sistemụ exampnke 1:
| PLC | Nlereanya | Ihe ntinye | Isi ihe mmepụta | Nọmba ntinye | Nọmba mmepụta |
| MPU | 16EH/32EH/
64EH |
8/16/32 | 8/16/32 | X0~X7, X0~X17, X0~X37 | Y0~Y7, Y0~Y17, Y0~Y37 |
| EXT1 | 32HP | 16 | 16 | X20~X37, X20~X37, X40~X57 | Y20~Y37, Y20~Y37, Y40~Y57 |
| EXT2 | 48HP | 24 | 24 | X40~X67, X40~X67, X60~X107 | Y40~Y67, Y40~Y67, Y60~Y107 |
| EXT3 | 08HP | 4 | 4 | X70~X73, X70~X73, X110~X113 | Y70~Y73, Y70~Y73, Y110~Y113 |
| EXT4 | 08HN | 0 | 8 | – | Y74~Y103, Y74~Y103, Y114~Y123 |
Na ngwa sistemụ example, ọ bụrụ na ntinye / mmepụta nke 1st MPU erughị 16, a ga-akọwa ntinye / mmepụta ya dị ka 16 ma si otú a enweghị ntinye / mmepụta kwekọrọ maka ọnụ ọgụgụ dị elu. Ọnụọgụ ntinye/Npụtapụta nke nọmba ndọtị bụ ọnụọgụ usoro sitere na ọnụọgụ ikpeazụ nke MPU.
Ịnweta ike
Ụdị ntinye ike maka usoro DVP-EH2 bụ ntinye AC. Mgbe ị na-arụ ọrụ PLC, biko rịba ama isi ihe ndị a:
- Ntinye voltage kwesịrị ịdị ugbu a na oke ya kwesịrị ịbụ 100 ~ 240VAC. Ekwesịrị ijikọ ike ahụ na L na N Wiring AC110V ma ọ bụ AC220V ruo +24V ọnụ ma ọ bụ ntinye ntinye ga-ebute mmebi dị ukwuu na PLC.
- Ntinye ike AC maka PLC MPU na modul I/O kwesịrị ịgbanwuo ma ọ bụ gbanyụọ n'otu oge.
- Jiri waya nke 1.6mm (ma ọ bụ karịa) maka ntọ ala nke PLC MPU. Nkwụsị ike nke na-erughị 10 ms agaghị emetụta ọrụ nke Otú ọ dị, oge nkwụsị ike nke dị ogologo ma ọ bụ nkwụsị nke ike vol.tage ga-akwụsị ọrụ nke PLC na mmepụta niile ga-apụ. Mgbe ike laghachiri na ọkwa nkịtị, PLC ga-amaliteghachi ọrụ ozugbo. (Ekwesịrị ịkpachara anya na relays inyeaka ndị a na-etinye na ndekọ n'ime PLC mgbe ị na-eme mmemme).
- Enyere mmepụta +24V na 0.5A site na MPU. Ejikọla ihe ọkụ ndị ọzọ dị na mpụga na ọdụ a. Ọnụ ntinye ntinye ọ bụla chọrọ 6 ~ 7mA ka ebugharị; eg ntinye 16 ga-achọ ihe dịka 100mA. Ya mere, + 24V ọnụ ala enweghị ike inye mmepụta na ibu mpụga nke karịrị 400mA.
⬥ Safety Wiring
Na sistemụ njikwa PLC, a na-achịkwa ọtụtụ ngwaọrụ n'otu oge yana omume nke ngwaọrụ ọ bụla nwere ike imetụta ibe ya, ya bụ mmebi nke ngwaọrụ ọ bụla nwere ike ibute ndakpọ nke sistemu njikwa akpaaka na ihe egwu. Ya mere, anyị na-atụ aro ka ị waya sekit nchebe na ọdụ ntinye ọkụ. Lee foto dị n'okpuru.
| ○1 | Ike ọkọnọ AC: 100 ~ 240VAC, 50/60Hz | ○2 | Njiji |
| ○3 | Nkwụsị mberede: Bọtịnụ a na-ebipụ ọkụ sistemu mgbe ihe mberede mberede mere. | ||
| ○4 | Ngosipụta ike | ○5 | AC ike ọkọnọ ibu |
| ○6 | Igwe nchekwa sekit na-enye ọkụ (2A) | ○7 | DVP-PLC (Ngalaba nhazi) |
| ○8 | Mmepụta ọkụ ọkụ DC: 24VDC, 500mA | ||
⬥ Input Point Wiring
Enwere ụdị ntinye DC 2, SINK na SOURCE. (Lee example n'okpuru. Maka nhazi nkọwa zuru ezu, biko rụtụ aka na nkọwapụta nke ụdị ọ bụla
- Mgbama DC IN – ọnọdụ SINK sekit akara aka aka ntinye ntinye
- Mgbama DC IN – ọnọdụ SINK
Wiring Point mmepụta
Mgbasa ozi sekit mmepụta ọsọ (R).
| ○1 | Ọkụ ọkụ DC | ○2 | Nkwụsị mberede: Na-eji mgba ọkụ mpụga |
| ○3 | Fuse: Na-eji 5 ~ 10A fuse na njedebe nke kọntaktị mmepụta iji chebe sekit mmepụta | ||
| ○4 | Voltage suppressor: Ịgbatị ogologo ndụ nke kọntaktị.
1. Diode suppression nke DC ibu: A na-eji ya mgbe ọ dị obere ike (Fig 8) 2. Diode + Zener nkwụsị nke ibu DC: A na-eji ya mgbe ọ nwere ike buru ibu na ịgbanwuo / gbanyụọ (Njirimara 9) |
||
| ○5 | Ọkụ na-enwu ọkụ (ibu na-eguzogide) | ○6 | Ike ọkọnọ AC |
| ○7 | Nsonaazụ pụrụiche nke aka ya: Maka example, Y2 na Y3 na-achịkwa na-aga n'ihu na-agba ọsọ ma na-atụgharị na-agba ọsọ nke moto ahụ, na-emepụta ihe mgbochi maka sekit dị n'èzí, yana mmemme ime PLC, iji hụ na nchebe dị mma ma ọ bụrụ na e nwere njehie ọ bụla a na-atụghị anya ya. | ||
| ○8 | Absorber: Iji belata nnyonye anya na ibu AC (Foto 10) | ||
Transistor (T) eriri sekit mmepụta
| ○1 | Ọkụ ọkụ DC | ○2 | Nkwụsị mberede | ○3 | Igwe nchekwa sekit |
| ○4 | Ihe mmepụta nke ụdị transistor bụ "oghe oghe". Ọ bụrụ na edobere Y0/Y1 ka ọ bụrụ mpụta mkpụrụ akụ, ihe nrụpụta ugbu a ga-adịrịrị karịa 0.1A iji hụ na arụrụ ọrụ nke ụdị a.
1. Mbelata diode: A na-eji ya mgbe ọ dị obere (Njirimara 12) 2. Diode + Zener suppression: A na-eji ya mgbe ọ nwere ike buru ibu yana ịgbanwuo / gbanyụọ ugboro ugboro (Njirimara 13) |
||||
| ○5 | Ọkụ na-enwu ọkụ (ibu na-eguzogide) | ||||
| ○6 | Nsonaazụ pụrụiche nke aka ya: Maka example, Y2 na Y3 na-achịkwa na-aga n'ihu na-agba ọsọ ma na-atụgharị na-agba ọsọ nke moto ahụ, na-emepụta ihe mgbochi maka sekit dị n'èzí, yana mmemme ime PLC, iji hụ na nchebe dị mma ma ọ bụrụ na e nwere njehie ọ bụla a na-atụghị anya ya. | ||||
Nhazi ọdụ
Gụkwuo maka akwụkwọ ntuziaka a wee budata PDF:
Akwụkwọ / akụrụngwa
 |
DELTA DVP-EH Series Ndị njikwa mgbagha nwere ike ime [pdf] Akwụkwọ ntuziaka 08HM11N 16T, 11HP32T, DVP-EH Series Programmable Logic Controllers, DVP-EH Series, Programmable Logic Controllers, Logic Controllers, Ndị njikwa |