Arkalumen APT-CV2-CVO Linear LED Controller

Ozi ngwaahịa

Aha ngwaahịa	Arkalumen APT Programmer
Nọmba nlereanya	APT-CV2-VC-LN-CVO
Ntuziaka onye ọrụ	APT-CC-VC

Ntuziaka ojiji ngwaahịa

Jikọọ APT Programmer

1. Jikọọ APT Programmer na PC na njikwa dịka egosiri na foto 1.

Ịwụnye Interface APT Programmer

1. Pịa na njikọ enyere ka ibudata folda APT Programmer Interface.
2. Mepee folda “APT Program.mer Interface” na PC dabere na Windows, setup.exe.
3. Mwepụta setup.exe ka ịwụnye APT Programmer Interface. A ga-agbakwunye ụzọ mkpirisi Interface APT Programmer na NchNhr mmalite.

Na-arụ ọrụ Interface APT Programmer

1. Mepee ngwanrọ Interface APT Programmer site na ịhọrọ ngwa a, APT Programmer Interface, site na NchNhr mmalite. Window Jikọọ Programmer (nke egosiri na eserese 2) ga-emeghe.
2. Họrọ ọdụ ụgbọ mmiri COM nke ejikọrọ APT Programmer na menu ndọda Port. Ọ bụrụ na anaghị ahụ ọdụ ụgbọ mmiri COM, pịa bọtịnụ ahụ ruo mgbe a ga-ahụ ọdụ ụgbọ mmiri ziri ezi.
3. Pịa "njikọ njikwa" iji guzobe njikọ. Ozugbo ejikọrọ, windo APT Programmer Interface (nke egosiri na foto 3) ga-emeghe.

Iji windo Interface Programmer

Mara: Ịpị "Mba" ga-atụfu mgbanwe niile echekwara.

• Na-egosiputa njikwa APT ejikọrọ.
• Gaa na ntọala ngwa ngwa site na ịpị taabụ.
• Mepee, pịa Ctrl+O ma ọ bụ họrọ File > Mepee site na menu.
• Pịa Chekwa, pịa Ctrl + S ma ọ bụ họrọ File > Chekwa dị ka site na menu.
• Pịa "Mmemme" ka ịhazi onye njikwa.
• Ogwe ọganihu na-egosiputa ọkwa nke ọrụ dị ugbu a.
• Na-egosiputa "Njikere Mmemme" ma ọ bụrụ na APT Programmer Interface ejikọrọ nke ọma na APT Programmer. Ọ bụrụ na enwebeghị njikọ ọ bụla, ọ ga-agụ "Onye Mmekọ Ejikọghị".
• Na-egosiputa njikwa APT ejikọrọ ugbu a yana ụdị ngwaike ya. Ọ bụrụ na achọtaghị njikwa APT ejikọrọ, ọ ga-agụ "Onye njikwa anaghị ejikọta ya".

Ntọala ntọala
Pịa "Weghachite njikwa nhazi" ka view nhazi nhazi ugbu a nke njikwa ejikọrọ. Window dị iche ga-eji nhazi njikwa (egosi na eserese 6).

Pịa “Jiri nhazi ndị a” ibubata nhazi onye njikwa ugbu a n'ime Interface APT Programmer.

Jikọọ APT Programmer

1. Jikọọ APT Programmer na PC na njikwa dịka egosiri na foto 1.

Iji APT Programmer

Ịwụnye Interface APT Programmer

1. Pịa na njikọ enyere ka ibudata folda APT Programmer Interface.
2. Mepee folda APT Programmer. Interface na PC dabere na Windows, setup.exe
3. Mwepụta setup.exe ka ịwụnye APT Programmer Interface. A ga-agbakwunye ụzọ mkpirisi Interface APT Programmer na NchNhr mmalite.

Na-arụ ọrụ Interface APT Programmer

1. Mepee ngwanrọ Interface APT Programmer site na ịhọrọ ngwa a, APT Programmer Interface, site na NchNhr mmalite. Window Jikọọ Programmer (nke egosiri na eserese 2) ga-emeghe.
2. Họrọ ọdụ ụgbọ mmiri COM nke ejikọrọ APT Programmer na menu ndọda Port. Ọ bụrụ na ahụghị ọdụ ụgbọ mmiri COM, pịa
   bọtịnụ ruo mgbe a ga-ahụ ọdụ ụgbọ mmiri ziri ezi.
3. Pịa Njikwa Jikọọ iji guzobe njikọ. Ozugbo ejikọrọ, windo APT Programmer Interface (nke egosiri na foto 3) ga-emeghe.

Ọgụgụ 2: Window Jikọọ Programmer

Mara: Ozugbo ejikọrọ, ọ bụrụ na APT Programmer egosighi na ndepụta ọdụ ụgbọ mmiri, biko mee faịlụ CDM212364_Setup ezitere na ngwa APT Programmer ka ịwụnye ndị ọkwọ ụgbọala.

Iji windo Interface Programmer

Wepụ Interface APT Programmer site na ịpị ×, ịpị Ctrl+Q ma ọ bụ họrọ File > Wepụ. Nke a ga-emeghe windo nwere nhọrọ ịchekwaa

Mara: Ịpị Mba ga-atụfu Ngosipụta niile echekwaraghị njikwa APT ejikọrọ.

• Gaa na ntọala ngwa ngwa site na ịpị taabụ.
• Mepee nhazi echekwara na mbụ file (arkc) site na ịpị.
• Mepee, pịa Ctrl+O ma ọ bụ họrọ File > Mepee site na menu.
• na ịpị Chekwa, pịa Ctrl+S ma ọ bụ họrọ File > Chekwa dị ka site na menu.
• pịa Mmemme iji hazie ihe njikwa.

Ọgụgụ 4: Window Interface Programmer – Ogwe ọnọdụ dị na ala nke mpio fig 3

Na-egosiputa dị njikere ma ọ bụrụ na APT Programmer Interface ejikọrọ nke ọma na APT Programmer. Ọ bụrụ na enwebeghị njikọ ọ bụla, ọ ga-agụ Programmer Not Connected.
Na-egosiputa njikwa APT ejikọrọ ugbu a yana ụdị ngwaike ya. Ọ bụrụ na achọtaghị njikwa APT ejikọrọ, ọ ga-agụ Controller Not Connected.

The Njikere ubi na ọnọdụ mmanya ngosi

• Njikere
• Adịghị Njikere
• Haziri nke ọma
• Weghachite aga nke ọma
• Ejikọtara njikwa na-ezighi ezi
• Ọ nweghị onye njikwa amata

Ntọala ntọala

Ọgụgụ 5: Window Interface Programmer 

Pịa bọtịnụ redio iji mee ka njirimara njikwa rụọ ọrụ.

• Onye CH na-enyere njikwa ike mmepụta aka (ìhè) maka ọwa ọ bụla.
• Ike-CCT na-eme ka njikwa ike dị na ọdụ ụgbọ mmiri COM1 yana njikwa okpomọkụ jikọtara ọnụ (ọkụ dị ọkụ ma ọ bụ dị jụụ) n'ọdụ ụgbọ mmiri COM2 nke onye njikwa APT.

Pịa Nweta Nhazi njikwa ka view nhazi nhazi ejikọrọ ugbu a. Nke dị iche ga-eji nhazi njikwa (egosiri na foto 6).

Ntọala ntọala

Ọgụgụ 6: Nhazi site na windo njikwa

Pịa Jiri Nhazi ndị a ka ibubata nhazi onye njikwa ugbu a na Interface APT Programmer.
Mara: A ga-agbanwe ntọala interface Interface APT niile ka ọ bụrụ nhazi onye njikwa ugbu a.

Tab dị elu

Ọgụgụ 7: Window Interface Programmer – Advanced tab

0-10V Kpachapụ anya
Tinye ụkpụrụ mkpụbelata 0-10V dị ala na njedebe dị elu iji wepụta oke ntinye voltages ruo kacha nta na kacha CCT na ike mmepụta.

Na-eme ka Dim-to-Ọkụ
Njirimara Dim-to-Warm dị naanị mgbe ahọpụtara Intensity-CCT dị ka njirimara njikwa.

1. Pịa igbe ahụ iji mee Dim-to-Warm. Mgbe ọ na-ebelata ọkụ ọkụ, ihu igwe agba agba agba (CCT) anaghị agbanwe agbanwe. Njirimara Dim-to-Warm na-eṅomi mmetụta nke halogen lamps, nke na-ekpo ọkụ mgbe ọ na-agbaji.
   Rịba ama: Achọrọ iji ọwa abụọ.
2. Gaa na CCT Mapping Tab ka bulite tebulu mgbanwe Dim-na-Ọkụ n'etiti ọkụ dị jụụ na nke na-ekpo ọkụ.

CCT Taabụ

Ọgụgụ 8: Window Interface Programmer – CCT Ranges tab

A ga-egosipụta nhọrọ ahụ dị ka CCT Low na CCT High na kọlụm dị n'akụkụ aka nri nke windo Programmer Interface.

Mara: Ọ bụrụ na agbanyere ya, Oke CCT Virtual na-ebute ụzọ karịa oke ọkụ CCT LED.

Ịtọlite ​​oke CCT mebere (omenala).

1. Tinye eriri LED CCT site na iji CCT kacha nta na ụkpụrụ CCT kachasị nke modul ikanam ejikọrọ na-akwado.
   Mara: A ga-egosi ntọala dị ugbu a dị ka
2. Tinye nọmba Model LED jikọtara ya na opekempe na kacha CCT ka ịgbakwunye ozi ndị ọzọ maka akụkọ ewepụtara.
3. Pịa igbe ahụ iji mee ka Virtual CCT rụọ ọrụ.
4. Tinye CCT dị ala na CCT ụkpụrụ dị elu.
   Mara: CCT dị ala ga-adịrịrị ma ọ bụ ha nhata na Opekempe CCT, ebe elu CCT ga-erughị ma ọ bụ ha nhata.

CCT mapping Tab

Ọgụgụ 9: Window Interface Programmer – CCT Mapping tab

Egosipụtara na tebụl, a na-edepụta uru CCT ọ bụla ka ọ bụrụ pasentịtage ratio maka otu ọwa sitere na opekempe (0%) ruo kacha (100%). Maapụ ndabara na-agbasa n'otu n'otu ụkpụrụ 256 yana usoro ahịrị nke CH1 na-abawanye site na 0% ruo 100% yana CH2 na-agbada site na 100% ruo 0%. Pịa igbe ahụ iji mee ka eserese nke an-kpọ.
Kwado Mbubata, Mbupu, ma ọ bụ Chekwa nke Tebụl Maapụ CCT site na ịhọrọ bọtịnụ. Usoro zuru ezu na ibe 7.

Na-ebugote maapụ omenala CCT

1. Họrọ Intensity-CCT njikwa na Basic Tab.
   Pịa bọtịnụ nkewa omenala na taabụ CCT Mapping.
2. Tinye ọnụ ọgụgụ etiti oge CCT, sitere na 2 ruo 256, CH1/CH2 pasenttagỌnụ ọgụgụ e ga-ekesa n'otu n'otu na CCT ọhụrụ.
3. Họrọ ọrụ Linear ma ọ bụ Nzọụkwụ. Linear ga-emepụta maapụ CCT nwere ntụgharị ahịrị n'etiti ebe etiti ọ bụla. Nzọụkwụ ga-emepụta maapụ CCT nwere ntụgharị nzọụkwụ n'etiti nkeji oge ọ bụla.
4. Tinye ụkpụrụ na tebụl iji tinye pasentịtage CCT ruru maka CH1 ma ọ bụ CH2.

Mara: Ịhọrọ nkewa mbụ ga-emepe windo nwere nhọrọ iji chekwaa nkewa omenala ugbu a.

• Pịa Lock CCT Mapping Tebụl iji gbochie mgbanwe ka emee na tebụl eserese, nke a ga-emelitekwa eserese (gosiri na eserese 11).
• Ndụmọdụ: Pịgharịa gaa na ala nke mpio ka ịhụ eserese (Nkeji 11) nke nhazi nkewa ugbu a.
• Pịa igbe bulite kpọchie CCT Mapping To Controller ka ị bulite tebụl eserese mgbe ịpị Mmemme.
• Pịa Unlock CCT Mapping Tebụl, mgbe a na-akpọchi tebụl eserese, iji mee mgbanwe na tebụl.

Ọgụgụ 10: eserese eserese CCT

Iji Excel iji hazie tebụl eserese

1. Pịa Tebụl Mbupụ Mbupụ ka iwepụta mpempe akwụkwọ nwere tebụl eserese nke mepere emepe ugbu a.
2. Gbanwee tebụl nkewa ozugbo na mpempe akwụkwọ, hụ na sel niile enwere ike edezi nwere uru.
3. Chekwaa akwụkwọ akụkọ (.xlsx).

Na-echekwa tebụl eserese

1. Pịa Chekwa tebụl eserese iji chekwaa tebụl eserese dị ugbu a.
2. Chọta ebe nchekwa maka faịlụ spreadsheet ewepụtara (.xlsx) nwere tebụl eserese nke mepere emepe ugbu a.
3. Kpọọ aha ma chekwaa faịlụ ahụ n'ebe achọrọ.

Na-ebubata tebụl maapụ echekwara na mbụ

1. Pịa Tebụl Mbubata ka imepe tebụl eserese nke echekwara na mbụ na Interface APT Programmer.
2. Họrọ faịlụ spreadsheet maapụ nke echekwara na mbụ (.xslx) n'ime ihe nchọgharị faịlụ.
3. Pịa Mepee n'ime ihe nchọgharị faịlụ, ka ibubata faịlụ ahụ. Ọ bụrụ na edoziri akwụkwọ akụkọ ahụ nke ọma, a ga-ebubata ya nke ọma ma ọ bụghị ya, a ga-egosipụta ozi mperi na agaghị ebubata faịlụ ahụ.

INT Mapping Tab

Ọgụgụ 11: Window Interface Programmer – INT Mapping Tab

Egosiri na tebụl, a na-esetịpụ uru INT ọ bụla na pasentịtage ratio maka otu ọwa sitere na opekempe (0%) ruo kacha (100%). Maapụ ndabara na-agbasa n'otu n'otu ụkpụrụ 256 yana usoro ahịrị nke ma CH1 na CH2 na-abawanye site na 0% ruo 100%. Pịa igbe ahụ iji mee ka eserese nke an-kpọ.

Ọgụgụ 12: INT Mapping Tab – Otu eserese maka ọwa niile anaghị enyocha ya

Ọgụgụ 12 na-egosiputa Tebụl Maapụ INT mgbe enyochaghị igbe nrịbama Otu Mapping maka ọwa niile, na-enye ohere ịse eserese INT maka ọwa ọ bụla n'otu n'otu.

Na-ebugote nkewa ike maka njikwa ọwa onye ọ bụla

1. Họrọ njikwa ọwa onye ọ bụla na ntọala ntọala.
2. Pịa bọtịnụ nkewa omenala na taabụ INT Mapping.
3. Tinye ọnụ ọgụgụ nke ogologo oge ike, sitere na 2 ruo 256.
4. Họrọ ọrụ Linear ma ọ bụ Nzọụkwụ. Linear ga-emepụta maapụ INT nwere ntụgharị ahịrị n'etiti ebe etiti ọ bụla. Nzọụkwụ ga-emepụta maapụ INT nwere ntụgharị nzọụkwụ n'etiti nkeji oge ọ bụla.
   Ndụmọdụ: Pịa otu nkewa maka igbe ọwa niile iji mee ka eserese INT bụrụ otu maka ọwa niile CH1/CH2.
5. Tinye ụkpụrụ na tebụl iji tinye pasentịtage ruru maka CH1 ma ọ bụ CH2.
   Mara: Ịhọrọ nkewa an-kpọ ga-emepe windo nwere nhọrọ iji chekwaa maapụ omenala dị ugbu a.

•  Pịa Mkpọchi INT Mapping Tebụl iji gbochie mgbanwe ime na tebụl eserese.
• Pịa igbe nke bulite kpọchiri akpọchi INT Mapping Table To Controller ka ị bulite tebụl eserese mgbe ịpị Mmemme.
• Pịa Unlock INT Mapping Tebụl, mgbe a na-akpọchi tebụl eserese, iji mee mgbanwe na tebụl.

Ọgụgụ 13: eserese INT maka ọwa niile

Ọgụgụ 14: eserese INT maka ọwa ọ bụla

Ọgụgụ 15: INT Mapping Tab mgbe ahọpụtara Intensity-CCT dị ka njirimara njikwa.

Na-ebugote maapụ INT maka ike nke CCT

1. Họrọ Intensity-CCT njikwa na Basic Tab.
2. Pịa bọtịnụ nkewa omenala na taabụ INT Mapping.
3. Tinye ọnụ ọgụgụ nke oge ike, sitere na 2 ruo 256.
4. Họrọ ọrụ Linear ma ọ bụ Nzọụkwụ. Linear ga-emepụta maapụ INT nwere ntụgharị ahịrị n'etiti ebe etiti ọ bụla. Nzọụkwụ ga-emepụta maapụ INT nwere ntụgharị nzọụkwụ n'etiti nkeji oge ọ bụla.
5. Tinye ụkpụrụ n'ime tebụl iji tinye oke ike maka CCT.
   Mara: Ịhọrọ nkewa an-kpọ ga-emepe windo nwere nhọrọ iji chekwaa maapụ omenala dị ugbu a.

Ọgụgụ 16: eserese INT maka ịdị ike nke CCT

Iji Excel iji hazie tebụl maapụ INT

1. Pịa Mbupụ Tebụl Mapping INT ka ịmepụta akwụkwọ akụkọ nwere tebụl eserese nke mepere emepe ugbu a.
2. Gbanwee tebụl eserese ozugbo na mpempe akwụkwọ na-agbanweghị usoro nhazi.
3. Chekwaa akwụkwọ akụkọ (.xslx).

Ịchekwa tebụl maapụ INT

1. Pịa Chekwa Tebụl Mapping INT iji chekwaa tebụl eserese dị ugbu a.
2. Chọta ebe nchekwa maka faịlụ spreadsheet ewepụtara (.xslx) nwere tebụl eserese nke mepere emepe ugbu a.
3. Kpọọ aha ma chekwaa faịlụ ahụ n'ebe achọrọ.

Na-ebubata tebụl maapụ INT echekwara na mbụ

1. Pịa Mbubata INT Mapping Tebụl iji mepee tebụl eserese nke echekwara na mbụ na Interface APT Programmer.
2. Họrọ faịlụ spreadsheet maapụ nke echekwara na mbụ (.xslx) n'ime ihe nchọgharị faịlụ.
3. Pịa Mepee na ihe nchọgharị faịlụ ka ibubata faịlụ; ọ bụrụ na edobere akwụkwọ akụkọ ahụ nke ọma, a ga-ebubata ya nke ọma.

Ndụmọdụ: Pịgharịa gaa na ala nke mpio ahụ ka ịhụ eserese (gosiri na eserese 13, 14, na 16) nke nhazi maapụ INT dị ugbu a.

Na-emepụta akara

Ọgụgụ 17: Window Generation Label

1. Họrọ File > Mepụta akara ma ọ bụ pịa Ctrl + L ka imepe windo Generation Label (gosiri na eserese 17).
2. Tinye nọmba NJ nke nwere ọnụọgụ anọ edere na akara izizi (gosiri na eserese 4). Nọmba ID na-egosi nrụpụta nrụpụta nke njikwa APT.
3. Pịa n'ịwa aha.
4. Tinye ahịrị mmalite na mmecha na ogidi ndị ga-adaba na akara azụ ma ọ bụ n'ihu. A na-eme ka mpaghara ahọpụtara pụta ìhè na-acha anụnụ anụnụ (Foto 18).
5. Họrọ Bipụta zuru oke ka ibipụta ibe niile.
6. Pịa n'ịwa Labels, ndabara web ihe nchọgharị ga-emeghe wee gosipụta ihe mbụview nke mbipụta.
   Mara: Arkalumen na-akwado iji Google Chrome na ịtọ oke na Ọ nweghị na nhọrọ mbipụta.

Ọgụgụ 18: Mbipụta nrịbama akaraview windo

Iji nweta akara oghere, kpọtụrụ Arkalumen ma ọ bụ gaa na ya onlinelabels.com
Akara aha: https://www.onlinelabels.com/products/ol1930lp
Mgbe ị na-enye iwu, Arkalumen na-atụ aro ka ịhọrọ akara Polyester na-egbochi ihu igwe n'ime ihe dabara adaba maka ngwa nbipute gị.

Ịmepụta mkpesa

Ọgụgụ 19: Window Generation Report

Ọgụgụ 20: Ọpụample nke ibe mbụ nke akụkọ ewepụtara

1. Họrọ File > Mepụta mkpesa, ma ọ bụ pịa Ctrl+R, ka imepe windo ọgbọ mkpesa (gosiri na eserese 19).
2. Tinye nọmba akụkụ ụbọchị, onye ahịa, ụlọ ọrụ na Light Engine iji hazie akụkọ ahụ.
3. Pịa na igbe ọcha dị n'okpuru Tinye Logo ụlọ ọrụ iji tinye akara na akụkọ (nhọrọ).
4. Họrọ akara achọrọ (.jpg) na ihe nchọgharị faịlụ wee pịa Mepee (nhọrọ).
5. Pịa n'ịwa Report, ndabara web ihe nchọgharị ga-emeghe wee gosipụta ihe mbụview nke mbipụta (gosiri na foto 20 & 21).

Mara: Arkalumen na-akwado iji Google Chrome na ịtọ oke na Ọ nweghị na nhọrọ mbipụta.

Ọgụgụ 21: Ọpụample nke ibe nke abụọ nke akụkọ emepụtara

Ọ bụrụ n'oge ọ bụla ị nwere nkwupụta ma ọ bụ aro gbasara APT Programmer ma ọ bụ APT Controller, biko pịa taabụ nzaghachi dị n'elu menu mmanya iji nyefee ozi n'aka ndị otu anyị. Anyị na-enwe ekele maka nzaghachi niile ma na-agba mbọ na-aga n'ihu na-emeziwanye ngwaahịa anyị. Maka nkwado ozugbo, biko kpọtụrụ ndị otu Arkalumen na 1-877-856-5533 ma ọ bụ email support@arkalumen.com

Arkalumen na-echepụta ma na-arụpụta ndị na-ahụ maka LED nwere ọgụgụ isi na modul LED omenala maka afọ ọkụ, akụkọ ihe mere eme nke Arkalumen nke ịnya ụgbọ ala n'ime ụlọ ọrụ ọkụ na-enwe obi ụtọ ịkwanye oke nke ihe ọkụ ọkụ ji nganga megharịa ma gbakọta na North America.
Gaa leta Arkalumen.com ịhụ Pọtụfoliyo ngwaahịa anyị zuru oke

• Arkalumen.com
• Mkpu: 1
• Edeziri: Febụwarị 28, 2022

Akwụkwọ / akụrụngwa

Arkalumen APT-CV2-CVO Linear LED Controller [pdf] Ntuziaka onye ọrụ APT-CV2-CVO Linear LED Controller, APT-CV2-CVO, Linear LED Controller, LED Controller, Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ