Home › HYPERX › HYPERX SoloCast User Guide

HYPERX SoloCast User Guide

HYPERX SoloCast

Overview

A Tap-to-mute sensor
B Microphone status LED
C Microphone alignment guide
D Microphone stand
E USB-C port
F USB cable

Using PC or PS4

Microphone Position

SoloCast should be placed with the front of the microphone facing the sound source. This is indicated by the alignment guide on both the microphone and the stand.
SoloCast can be rotated to allow for easy placement under a monitor.

Muting the Microphone

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will ash when the mute is enabled.Using a Microphone Mount

SoloCast can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads.Questions or Setup Issues?

Contact the HyperX support team or see user manual at: hyperxgaming.com/support/microphones

Documents / Resources

SoloCast

User Guide · SoloCast

References

High Quality Gaming Gear – HyperX UShyperxgaming.com
High Quality Gaming Gear – HyperX UShyperxgaming.com
User Manualmanual.tools

Published: July 28, 2021

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

伊藤　辰一 says:

February 16, 2025 at 1:04 pm
何故繋がらない
伊藤　辰一 asks 何故繋がらない

Manuals+ clarified question

Question

Why won't my HyperX SoloCast connect?
Answer

If your HyperX SoloCast is not connecting or being recognized, please follow these troubleshooting steps:

Check the USB Connection: Ensure the USB-C cable is firmly plugged into the microphone's port (E) and the USB-A end is securely connected to a functional USB port on your PC or PS4.

Verify Power Status: Check the Microphone status LED (B). If the LED is not lit, the device is not receiving power. Try a different USB port or a different USB cable to rule out a faulty connection.

Check Mute Status: If the LED is flashing, the microphone is muted. Tap the top of the microphone (A) to unmute it.

System Settings: On a PC, ensure the SoloCast is selected as the 'Default Device' in your Sound Settings under the 'Recording' tab. On a PS4, go to Settings > Devices > Audio Devices and ensure the Input Device is set to HyperX SoloCast.

Software: For advanced customization or firmware updates, you can download the HyperX NGENUITY software at hyperxgaming.com/ngenuity.

If the device still fails to connect, you may need to contact HyperX support at hyperxgaming.com/support/microphones.
Read the full Q&A page
Reply