HyperX Cloud Stinger 3 Wireless User Manual

HyperX-LOGO-new

HyperX Cloud Stinger 3 Wireless

HyperX-Cloud-Stinger-3-Wireless-PRODUCT

Overview

  • Swivel-to-mute microphone
  • Status LED
  • Power button
  • USB-C charge port
  • Multifunction button
  • Volume wheel
  • Wireless mode switch
  • USB wireless dongle
  • Dongle status LED
  • Pairing pin hole
  • USB-C to USB-A adapter
  • USB-C charge cable

HyperX-Cloud-Stinger-3-Wireless (2)

Charging

It is recommended to fully charge your headset before rst use. HyperX-Cloud-Stinger-3-Wireless (3)

Usage

Adapter Mode (2.4GHz)

  1. Slide the headset wireless mode switch toHyperX-Cloud-Stinger-3-Wireless (4)
  2. Connect the USB wireless dongle to your device.
  3. Power ON the headset.HyperX-Cloud-Stinger-3-Wireless (5)

Bluetooth mode

  1. Slide the wireless mode switch toHyperX-Cloud-Stinger-3-Wireless (7). The headset will enter Bluetooth pairing on the rst setup.
  2. Go to your device Bluetooth settings, search, and connect to “HyperX Cloud Stinger 3 Wireless”.HyperX-Cloud-Stinger-3-Wireless (6)

Bluetooth pairing

  1. Slide the wireless mode switch toHyperX-Cloud-Stinger-3-Wireless (7)
  2. Press and hold both the power button and the multifunction button for 2s.
    Pairing mode is active when the LED blinks blue and the voice prompt says, “Bluetooth pairing”.
  3. Go to your device’s Bluetooth settings and connect to “HyperX Cloud Stinger 3 Wireless”.XHyperX-Cloud-Stinger-3-Wireless (8)

Setup

Windows 11

  1. Right-click on the sound icon in the system tray and select Sound Settings.
  2. Set the output device to Headphones [HyperX Cloud Stinger 3 Wireless].
  3. Set the input device to Microphone [HyperX Cloud Stinger 3 Wireless] HyperX-Cloud-Stinger-3-Wireless (9)

PlayStation 5 HyperX-Cloud-Stinger-3-Wireless (10)Go to the home page and select Settings > Sound.

Microphone

  • Input Device: USB Headset “HyperX Cloud Stinger 3 Wireless”.

Audio Output

  • Output Device: USB Headset “HyperX Cloud Stinger 3 Wireless”.
  • Output to Headphones: All Audio.

Headset Controls

Status LED

STATUS ADAPTER MODE

  • Pairing Fast blinking white
  • Searching Blinking white
  • Connected Solid-fade white for 5s

BLUETOOTH MODE

  • Fast blinking blue
  • Blinking blue
  • Solid-fade blue for 5s

Power button

  • Power on/of – Hold button for 2 seconds to power headset on/of.
  • Battery level status – Press button to check the battery level.
  • The status LED will automatically turn of to conserve battery life.
BATTERY LEVEL HEADSET STATUS LED
61% to 100% Solid-fade Green
21% to 60% Solid-fade Yellow
10% to 20% Solid-fade Red
< 10% Short-blink Red

Multifunction button

SINGLE PRESS DOUBLE PRESS TRIPLE PRESS LONG PRESS (2S)
Play / Pause Answer Call Skip Track End Call Reject Call Previous Track Activate Voice Assistant

Note: Button functionality can vary between devices and apps.

Volume wheel
Scroll wheel to adjust volume level

Swivel to Mute Microphone

HyperX-Cloud-Stinger-3-Wireless (11)

HyperX NGENUITY Software
Go to HyperX.com/NGENUITY to download the NGENUITY software.
NGENUITY software features include:

  • Adjustable auto shut-of behavior
  • Battery level indicator
  • Mic monitoring

Questions or Setup Issues?HyperX-Cloud-Stinger-3-Wireless (1)

WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Battery Replacement

  1. Power OFF the headset.
  2. Carefully pull the left ear cushion from the headset.
  3. Unscrew the 4x Philips screws to separate the driver cover from the left earcup.
  4. Gently separate the cover from the earcup to avoid any damage.
  5. Locate and remove the battery secured with a connector.
  6. Place new battery matching correct pin orientation.
  7. Close the driver cover and earcup. Reverse steps 3 and 2. Make sure to push cushion into the slot all around the earcup.
  8. Power ON the headset and test for functionality.

Documents / Resources

PDF thumbnailCloud Stinger 3 Wireless
User Manual · HyperX, 44X0098A, Cloud Stinger 3 Wireless, Gaming Headset

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.