HYPERX SoloCast User Guide

HYPERX SoloCast

Overview

A Tap-to-mute sensor
B Microphone status LED
C Microphone alignment guide
D Microphone stand
E USB-C port
F USB cable

Using PC or PS4

Microphone Position

SoloCast should be placed with the front of the microphone facing the sound source. This is indicated by the alignment guide on both the microphone and the stand.
SoloCast can be rotated to allow for easy placement under a monitor.

Muting the Microphone

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will ›ash when the mute is enabled.Using a Microphone Mount

SoloCast can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads.Questions or Setup Issues?

Contact the HyperX support team or see user manual at: hyperxgaming.com/support/microphones