Spectronix Eye-BERT 40G Software Programming
Cov ntaub ntawv khoom
Specifications
- Kev tswj chaw taws teeb thiab saib xyuas ntawm USB lossis yeem Ethernet txuas
- USB tsav tsheb installation yuav tsum muaj rau Windows operating systems
- Lub neej ntawd IP chaw nyob rau Ethernet kev sib txuas lus: 192.168.1.160
- Kev sib txuas lus raws tu qauv: TCP / IP ntawm chaw nres nkoj 2101
Cov lus qhia siv khoom
USB interface
- Luam the file cdc_NTXPV764.inf los ntawm cov khoom siv CD rau lub hard drive.
- Txuas lub qhov muag-BERT 40G rau hauv qhov chaw nres nkoj USB pub dawb thiab nruab tus tsav tsheb.
- Nrhiav tus naj npawb COM chaw nres nkoj hauv Device Manager rau kev sib txuas lus.
Yeem Ethernet Interface
Qhov muag-BERT 40G sib txuas lus siv TCP / IP ntawm chaw nres nkoj tus lej 2101 nrog qhov chaw nyob IP default ntawm 192.168.1.160.
- Siv Digi Device Discovery utility los khaws thiab hloov IP chaw nyob.
- Disable Windows Firewall thiab pib qhov kev pab cuam los teeb tsa kev teeb tsa network.
Cov lus txib
Qhov muag-BERT 40G sib txuas lus siv ASCII cov ntaub ntawv nrog cov lus txib hauv qab no.
| txib | Teb |
|---|---|
| ? (Tau txais Unit Information) | Pib ntawm cov lus teb Command Echo Unit lub npe Firmware Rev |
Nco tseg:
- Txhua qhov kev sib txuas lus yog pib los ntawm tus tswv tsev.
- Cov lus txib tsis yog qhov tseem ceeb.
- Ib qhov chaw lossis kos npe sib npaug yuav tsum tau muab tso rau ntawm qhov hais kom ua thiab ib qho kev txwv.
- Tag nrho cov lus txib yuav tsum raug txiav nrog a.
- Tej lus teb yuav tsum tsis quav ntsej.
FAQ
Q: Kuv yuav hloov qhov chaw nyob IP ntawm Qhov Muag-BERT 40G li cas?
A: Siv Digi Device Discovery utility los khaws thiab hloov IP chaw nyob. Xa mus rau qhov kev pab cuam installation kom ntxaws cov kauj ruam.
Q: Dab tsi yog qhov chaw nyob IP rau Ethernet kev sib txuas lus?
A: Tus IP chaw nyob yog 192.168.1.160.
Tshajview
- Qhov muag-BERT 40G tso cai rau cov chaw taws teeb tswj thiab saib xyuas los ntawm USB lossis kev xaiv Ethernet txuas.
- Thaum ib qho kev sib txuas tau ua rau lub qhov muag-BERT siv ib qho ntawm cov kev cuam tshuam no, tag nrho cov lus txib thiab kev tswj hwm yog tib yam tsis hais qhov twg siv interface.
USB interface:
- Txhawm rau Windows kom paub txog qhov muag-BERT 40G USB chaw nres nkoj USB tsav tsheb yuav tsum xub muab ntsia, tom qab ntawd lub qhov muag-BERT 40G tshwm ua qhov chaw nres nkoj COM ntxiv ntawm lub computer. Tam sim no, Windows XP, Vista, 7, thiab 8 tau txais kev txhawb nqa.
- Windows 7 xav tau cov kauj ruam ntxiv hauv qab no; Windows 8 xav tau cov kauj ruam ntxiv uas tuaj yeem pom hauv daim ntawv thov hauv qab no: http://www.spectronixinc.com/Downloads/Installing%20Under%20Windows%208.pdf
- Luam the file "cdc_NTXPV764.inf" los ntawm cov khoom siv CD rau lub hard drive.
- Txuas lub qhov muag-BERT 40G rau hauv qhov chaw nres nkoj USB dawb. Thaum lub hardware installation wizard nug rau qhov chaw tsav tsheb, xauj rau "cdc_NTXPVista.inf" file ntawm lub hard drive.
- Tom qab tus tsav tsheb tau teeb tsa txoj cai nyem "kuv lub computer" thiab xaiv "properties". Nyob rau hauv lub qhov rais Properties xaiv lub "hardware" tab. Nyem rau ntawm "tus thawj tswj khoom siv" thiab nthuav cov khoom "Chaw nres nkoj (COM & LPT)". Nrhiav "Spectronix, Inc." nkag thiab sau tus lej COM, (ie "COM4"). Qhov no yog qhov chaw nres nkoj COM uas software yuav siv los sib txuas lus nrog Eye-BERT 40G.
- Nco tseg, tias ntawm qee qhov kev khiav hauj lwm xws li Windows 7, phau ntawv USB tsav tsheb yuav tsim nyog.
- Yog hais tias lub hardware installation wizard ua tsis tiav, mus rau "Kuv Lub Computer" > "Properties" > "Hardware" Device Manager", thiab nrhiav "Spectronix" los yog "SERIAL DEMO" nkag hauv "Lwm yam khoom siv" thiab xaiv "Hloov tshiab tsav tsheb".
- Lub sijhawm no, koj yuav tuaj yeem mus rau qhov chaw ntawm tus tsav tsheb.
Yeem Ethernet Interface:
- Lub qhov muag-BERT 40G sib txuas lus siv TCP / IP ntawm chaw nres nkoj tus lej 2101 thiab raug xa nrog qhov chaw nyob IP default ntawm 192.168.1.160. Kev sib txuas rau qhov chaw nres nkoj no tau piav qhia hauv qab no siv HyperTerminal, TeraTerm, thiab RealTerm.
Hloov qhov chaw nyob IP
- Digi Device Discovery utility tso cai rau tus neeg siv rov qab thiab hloov qhov chaw nyob qhov muag-BERT IP. Qhov kev teeb tsa "40002265_G.exe" tuaj yeem pom ntawm Spectronix lossis Digi webqhov chaw.
- Tom qab txhim kho cov khoom siv hluav taws xob, lov tes taw Windows Firewall thiab lwm yam kab mob lossis cov phiaj xwm firewall thiab pib qhov program. Qhov kev zov me nyuam yuav tshaj tawm IP thiab MAC chaw nyob ntawm txhua yam khoom siv sib xws hauv lub network.
- Txoj cai-nias ntawm lub cuab yeej thiab xaiv "Configure
- Network Settings" los hloov cov kev teeb tsa network.
Cov lus txib
- Lub Qhov Muag-BERT 40G siv ASCII cov ntaub ntawv sib txuas lus nrog lub khoos phis tawj tswj hwm; cov lus hauv qab no teev cov lus txib, tsis txwv, thiab cov lus teb los ntawm Eye-BERT 40G.
Nco tseg:
- Txhua qhov kev sib txuas lus yog pib los ntawm tus tswv tsev.
- Cov lus txib tsis yog qhov tseem ceeb.
- Ib qhov chaw lossis kos npe sib npaug yuav tsum tau muab tso rau ntawm qhov hais kom ua thiab ib qho kev txwv.
- Tag nrho cov lus txib yuav tsum raug txiav nrog a .
- Ib qho teb yuav tsum tsis quav ntsej
| Tau txais Unit Information | |
| Hais kom ua: | Parameters: |
| “?” | (tsis muaj) |
| Teb: | Parameters: |
| Pib teb | { |
| Hais kom Echo | ?: |
| Lub npe | Qhov muag-BERT 40G 100400A |
| Firmware Rev | v 1.0 |
| Kev txiav txim | } |
| Nco tseg: |
| Teem cov ntaub ntawv tus nqi | |
| Hais kom ua: | Parameters: |
| “SetRate” | "#########" (Ntsis tus nqi hauv Kbps) |
| Teb: | Parameters: |
| (tsis muaj) | |
| Nco tseg: | Teem kom ze tshaj tus qauv ntsis tus nqi Example: “setrate=39813120” for 39.813120Gbps. |
| Teem tus qauv (generator thiab ntes) | |
| Hais kom ua: | Parameters: |
| “SetPat” | "7" (PIB 27-1)
"3" (PIB 231-1) “x” (K28.5 qauv) |
| Teb: | Parameters: |
| (tsis muaj) | |
| Nco tseg: | Example: “setpat=7” |
| Pib dua tus lej yuam kev, BER, thiab ntsuas lub sijhawm | |
| Hais kom ua: | Parameters: |
| “Reset” | (tsis muaj) |
| Teb: | Parameters: |
| (tsis muaj) | |
| Nco tseg: | |
| Nyeem cov xwm txheej thiab kev teeb tsa | |
| Hais kom ua: | Parameters: |
| “Stat” | (tsis muaj) |
| Teb: | Parameters: |
| Pib teb | { |
| Hais kom Echo | STAT: |
| SFP Tx wavelength (nm) | 1310.00 |
| SFP kub (°C) | 42 |
| Tus nqi qis (bps) | 39813120000 |
| Qauv | 3
(rau "setpat" hais kom ua) |
| Kev txiav txim | } |
| Nco tseg: | Tag nrho cov parameter yog cais los ntawm ","
Example: {STAT: 1310.00, 42, 39813120000, 3} |
| Nyeem cov ntsuas | |
| Hais kom ua: | Parameters: |
| “meas” | (tsis muaj) |
| Teb: | Parameters: |
| Pib teb | { |
| Hais kom Echo | MEAS: |
| Channel Number | 1
"1 txog 4" |
| Tx polarity los yog tawm | X
“+ lossis – lossis X = tawm” |
| Rx polarity | +
"+ los yog -" |
| Rx zog (dBm) | –21.2 |
| Teeb Liab | Sig
"Sig" or "LOS" |
| Xauv xwm txheej | Xauv
“Lock” or “LOL” |
| yuam kev suav | 2.354 ib 04 |
| suav me ntsis | 1.522 ib 10 |
| BER | 1.547 e-06 |
| Test Sijhawm (seconds) | 864 |
| Kev txiav txim | } |
| Kuaj cov transceiver thiab xa rov qab daim ntawv xeem | |
| Hais kom ua: | Parameters: |
| “Test” | |
| Teb: | Parameters: |
| Test Report | (ASCII text formatted cov ntaub ntawv hais txog QSFP suav nrog Cov Neeg Muag Khoom, Tus Qauv, Tus Naj Npawb, Qib Hwjchim, thiab cov ntaub ntawv los ntawm txhua qhov kev sau npe) |
| Pib teb | { |
| Hais kom Echo | Kuaj: |
| QSFP Cov Ntawv Sau Npe: |  |
| Kev txiav txim | } |
| Nco tseg: | Kev xeem muaj cov hauv qab no:
1. Txais fais fab theem <= -10dBm nrog lub transmitter tawm 2. QSFP yuav tsum qhia LOS nrog lub transmitter tawm 3. Txais fais fab theem> -10dBm nrog lub transmitter rau 4. QSFP yuav tsum tsis txhob qhia LOS nrog lub transmitter rau 5. Yog tias BER yog> 0, qhov yuam kev raug tshaj tawm yog tias qhov ntsuas ntsuas nyob hauv 100Mbps ntawm tus nqi tshaj tawm, txwv tsis pub yuav ceeb toom. Hauv example saum toj no, channel 3 qhia tsawg tau txais fais fab thaum lub transmitter tau enabled ua rau muaj kev ua yuam kev. Qhov kev sim BER ua tsis tiav ntawm 41.25Gbps txij li lub cuab yeej tau ntsuas rau 41.2Gbps (10.3 * 4) thiab cov lus ceeb toom tau chij rau lwm tus nqi uas tau tshaj tawm qhov yuam kev. Nco ntsoov cov kev ntsuam xyuas no yuav tsis tsim nyog rau txhua tus transceivers. |
| Luam Ntawv Transceiver Sau npe cov ntaub ntawv thiab cov nqi | |
| Hais kom ua: | Parameters: |
| “PrintQSFP” | |
| Teb: | Parameters: |
| QSFP cov ntaub ntawv | (ASCII text formatted cov ntaub ntawv hais txog QSFP suav nrog Cov Neeg Muag Khoom, Tus Qauv, Tus Naj Npawb, Qib Hwjchim, thiab cov ntaub ntawv los ntawm txhua qhov kev sau npe) |
| Pib teb | { |
| Hais kom Echo | PRINTQSFP: |
| QSFP Cov Ntawv Sau Npe: |  |
| Nyeem QSFP Sau Npe | |
| Hais kom ua: | Parameters: |
| “RdQSFP” | “P” “A” "P": nplooj ntawv sau npe - 0 txog 3, "A": sau npe tus lej hauv hex - 0 txog FF
Example: "RdQSFP 0 0xC4" Nyeem thawj byte ntawm tus lej xov tooj los ntawm cov ntaub ntawv sau npe ntawm chaw nyob 0xC4 hauv nplooj 0. |
| Teb: | Parameters: |
| Pib teb | { |
| Hais kom Echo | RDQSFP: |
| Sau npe hom, sau npe tus lej, tus nqi | Example: "P00:c4 = 4d"
(nplooj 0, chaw nyob 0xC4 = 0x4d ("M" ASCII) |
| Kev txiav txim | } |
| Nco tseg: | Tag nrho cov txiaj ntsig dhau mus thiab xa rov qab yog nyob rau hauv hex, ua ntej "0x" yog xaiv tau. Input parameters yuav tsum sib cais los ntawm ib qho chaw. Nco ntsoov, tsis yog txhua tus neeg muag khoom QSFP txhawb kev nyeem ntawv thiab sau txhua qhov chaw. Saib SFF-8438 yog xav paub ntxiv. |
| Sau SFP Sau Npe, tom qab ntawd teb nrog tus nqi nyeem rov qab | |
| Hais kom ua: | Parameters: |
| “WrQSFP” | “P” “A” “D” "P": sau npe nplooj ntawv - 0 txog 3, "A": sau npe tus lej hauv hex - 0 txog FF, "D": tus nqi yuav tsum tau sau hauv hex.
Example: "WrQSFP 0 0x56 0x0F" Sau 0x0F rau qhov chaw nyob 0x56 kom tig tag nrho plaub lub transmitters tawm. Nco ntsoov, txij li qhov chaw nyob 0x56 nyob hauv qhov chaw nyob qis dua nplooj ntawv tus lej tsis cuam tshuam. |
| Teb: | Parameters: |
| Pib teb | { |
| Hais kom Echo | WRQSFP: |
| Sau npe hom, sau npe tus lej, tus nqi | Example: "P00:56 = 0F"
(cov ntawv kuaj mob (0xA2), tus lej sau npe (0x80), tus nqi nyeem rov qab (0x55) |
| Kev txiav txim | } |
| Nco tseg: | Tag nrho cov txiaj ntsig dhau mus thiab xa rov qab yog nyob rau hauv hex, ua ntej "0x" yog xaiv tau. Input parameters yuav tsum sib cais los ntawm ib qho chaw. Nco ntsoov, tsis yog txhua tus neeg muag khoom QSFP txhawb kev nyeem ntawv thiab sau txhua qhov chaw. Saib SFF-8438 yog xav paub ntxiv. |
www.spectronixinc.com Qhov muag-BERT 40G Software Programming Guide V 1.1
Cov ntaub ntawv / Cov ntaub ntawv
 |
Spectronix Eye-BERT 40G Software Programming [ua pdf] Cov lus qhia V1, V1.1, Qhov muag-BERT 40G Software Programming, Qhov muag-BERT 40G, Qhov muag-BERT, Qhov muag-BERT Software Programming, Software Programming |
