Raspberry Pi Pico-CAN-A CAN Bus Module

Raspberry Pi Pico Header Compatibility:

Onboard Poj Niam Pin Header rau Direct Txuas rau Raspberry Pi Pico Raspberry Pi Pico tsis suav nrog.

Dab tsi ntawm Board:

1. E810-TTL-CAN01 module
2. Module kev khiav hauj lwm qhov taw qhia
3. Module xwm txheej qhia: hom kev khiav hauj lwm: blinking ntawm 1Hz zaus
   hais kom ua configuration hom: blinking ntawm 5Hz zaus
4. TX/RX indicators
5. Resistor config: ON: txuas nrog 120R sib txuam resistor
   OFF: disconnected los ntawm 120R txuam resistor (default)
6. CAN lub tsheb npav terminal
7. Kev xaiv khoom siv hluav taws xob
8. UART xaiv

Pinout txhais:

Cov ntaub ntawv / Cov ntaub ntawv

Raspberry Pi Pico-CAN-A CAN Bus Module [ua pdf] Tus neeg siv phau ntawv Pico-CAN-A CAN Bus Module, Pico-CAN-A, CAN Bus Module, Tsheb npav Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv