Profile Version: R1.1.0
Khoom siv: R1.1.0
RIU Wireless Trunking Gateway Module
Tshaj tawm:
Phau ntawv no tsuas yog tsim los ua cov lus qhia ua haujlwm rau cov neeg siv.
Tsis muaj ib lub tsev lossis ib tus neeg tuaj yeem luam tawm lossis txiav tawm ib feem lossis tag nrho cov ntsiab lus ntawm phau ntawv no yam tsis tau sau ntawv tso cai los ntawm Lub Tuam Txhab, thiab yuav tsis muab faib rau hauv ib qho twg.
Daim ntawv cog lus no
1. Hais kom kab formatting conventions
Hom Lub ntsiab lus
/ hais kom ua kab ntau txoj kev sib cais los ntawm "/"
[ ] Qhia tias ib feem uas nyob nrog "[ ]" yog xaiv tau nyob rau hauv cov lus txib configuration.
// Ib kab pib nrog "//" yog kab lus.
# "#" yog linux system hais kom nkag mus rau tus cim, "#" ua raws li cov neeg siv nkag linux ua haujlwm hais kom ua, tag nrho linux hais kom nkag mus ua tiav, koj yuav tsum nias [Enter] nkag qhov tseem ceeb kom ua tiav cov lus txib;
Hauv Linux scripts, # yog ua raws li cov lus pom.
mysql> qhia txog kev lag luam database, thiab ">" ua raws li cov lus txib ua haujlwm database uas yuav tsum muaj cov neeg siv nkag.
2. GUI formatting conventions
Hom Lub ntsiab lus
<> Cov “<>” cov kab tuav qhia lub npe ntawm lub pob, xws li “Nyem qhov khawm”
[ ] Cov square brackets “[ ]” qhia lub npe lub qhov rais, lub npe ntawv qhia zaub mov, cov ntaub ntawv rooj thiab cov ntaub ntawv hom teb, xws li “Pop up [New User] window”
/ Multi-level menus thiab ntau daim teb piav qhia ntawm tib hom yog cais los ntawm "/". Rau example, [File/New/Folder] multi-level menu txhais tau tias [Folder] cov ntawv qhia zaub mov hauv qab [New] submenu ntawm [File] ntawv qhia zaub mov
Device Panel Taw Qhia
1.1 Schematic daim duab ntawm lub chassis
Module rau chassis UCP1600/2120/4131 series Daim duab 1-1-1 Frontal daim duab
1.2 Module schematic
Daim duab 1-2-1 Schematic daim duab ntawm RIU module
Raws li pom hauv daim duab 1-1-1, lub ntsiab lus ntawm txhua lub logo yog raws li hauv qab no
- Qhov taw qhia teeb: Muaj peb qhov taw qhia los ntawm sab laug mus rau sab xis: teeb meem teeb pom kev E fais fab teeb P, khiav teeb R; Lub hwj chim lub teeb yog ib txwm ntsuab tom qab ib txwm ua haujlwm ntawm cov khoom siv, lub teeb khiav yog ntsuab flashing, lub teeb txhaum tsis teeb.
- rov pib dua qhov tseem ceeb: luv nias kom rov pib dua, nias ntev dua 5 vib nas this kom kaw qhov saib xyuas, E teeb rau. Ntev nias rau ntau tshaj 10 vib nas this los kho qhov chaw nyob IP ib ntus 10.20.30.1, rov qab kho tus IP qub tom qab fais fab tuag thiab rov pib dua.
- W interface yog txhais raws li hauv qab no
Nkag mus
Nkag mus rau lub wireless cluster gateway module web nplooj ntawv: Qhib IE thiab nkag mus http://IP, (IP yog lub wireless gateway device chaw nyob, lub neej ntawd IP yog 10.20.40.40), nkag mus rau lub vijtsam nkag raws li qhia hauv daim duab 1-1-1 hauv qab no.
Tus neeg siv lub npe pib: admin, password: 1
Daim duab 2-1-1 Wireless Trunking Gateway Module Login Interface
Network ntaub ntawv configuration
3.1 Hloov kho IP zoo li qub
Qhov chaw nyob zoo li qub ntawm Wireless Trunk Gateway tuaj yeem hloov kho hauv [Basic/Network Configuration], raws li pom hauv daim duab 3-1-1.
Daim duab 3-1-1
Nco tseg: Tam sim no, lub wireless cluster gateway IP tau txais txoj hauv kev tsuas yog txhawb nqa zoo li qub, tom qab hloov kho cov ntaub ntawv chaw nyob hauv network, koj yuav tsum rov pib lub cuab yeej kom siv tau.
3.2 Registration server configuration
Hauv [Basic/Sip Server Settings], koj tuaj yeem teeb tsa tus IP chaw nyob ntawm thawj thiab thaub qab servers rau cov kev pabcuam sau npe, thiab cov txheej txheem sau npe thawj zaug thiab thaub qab, raws li pom hauv daim duab 3-2-1:
Daim duab 3-2-1
Cov txheej txheem kev sau npe thawj thiab thaub qab tau muab faib ua: tsis muaj kev hloov pauv thawj zaug thiab thaub qab, qhov tseem ceeb ntawm kev sau npe rau thawj softswitch, thiab qhov tseem ceeb ntawm kev sau npe rau softswitch tam sim no.
Qhov kev txiav txim ntawm kev sau npe: thawj softswitch, standby 1 softswitch, standby 2 softswitch, thiab standby 3 softswitch.
* Kev piav qhia: Tsis muaj qhov hloov pauv tseem ceeb thiab thaub qab: Tsuas yog mus rau thawj softswitch.
Kev tso npe rau thawj softswitch yuav tsum ua ntej: thawj softswitch sau npe tsis mus rau npe rau qhov thaub qab softswitch. Thaum tus thawj softswitch rov qab, lub voj voog kev sau npe tom ntej yuav sau npe nrog tus thawj softswitch.
Kev tso npe tseem ceeb rau lub softswitch tam sim no: kev sau npe tsis ua haujlwm rau thawj softswitch sau npe rau cov thaub qab softswitch. Thaum tus thawj softswitch rov qab, nws ib txwm sau npe nrog lub softswitch tam sim no thiab tsis sau npe nrog thawj softswitch.
3.3 Kev sib txuas lus chaw nres nkoj teeb tsa
Hauv [Advanced / SIP settings], koj tuaj yeem teeb tsa qhov chaw sib txuas lus thiab RTP chaw nres nkoj ntau, raws li pom hauv daim duab 3-3-1:
Daim duab 3-3-1
Softswitch Communication Port: Qhov chaw nres nkoj rau SIP kev sib txuas lus ntawm Wireless Trunking Gateway thiab IPPBX. RTP chaw nres nkoj yam tsawg kawg nkaus: qis qis ntawm qhov ntau ntawm qhov chaw nres nkoj xa thiab tau txais cov pob ntawv RTP. RTP chaw nres nkoj siab tshaj plaws: sab sauv txwv ntawm qhov ntau ntawm qhov chaw nres nkoj xa thiab txais cov pob ntawv RTP.
Nco tseg: Qhov kev teeb tsa no tsis pom zoo kom hloov pauv.
Tus neeg siv Configuration
4.1 Ntxiv tus lej neeg siv
Tus neeg siv tus naj npawb ntawm lub rooj vag wireless tuaj yeem muab ntxiv rau hauv [Basic/Channel settings], raws li pom hauv daim duab 4-1-1:
Daim duab 4-1-1
Nyem "Ntxiv" kom coj mus rau lub dialog box rau nkag mus rau tus neeg siv cov ntaub ntawv, raws li qhia nyob rau hauv daim duab 4-1-2:
Daim duab 4-1-2
Channel naj npawb: rau 0, 1, 2, 3 Tus neeg siv tus lej: tus xov tooj sib raug rau kab
Kev sau npe tus neeg siv lub npe, tus lej sau npe, lub sijhawm sau npe: tus lej lej, tus lej zais thiab lub sijhawm luv ntawm txhua qhov kev sau npe siv thaum sau npe rau lub platform.
Tus xov tooj hu xov tooj: tus xov tooj hu sib raug rau tus xov tooj hu xov tooj tseem ceeb
* Kev piav qhia:
- Lub sijhawm pib sau npe = Lub sijhawm sau npe * 0.85
- Lub rooj vag wireless siv tsuas yog plaub channel thiab tuaj yeem ntxiv plaub tus neeg siv xwb
Thaum ntxiv cov lej, koj tuaj yeem teeb tsa cov yuam sij ua haujlwm, xov xwm, nce, caum hu, PSTN, RET, thaum ntxiv cov lej txhawb nqa batch ntxiv thiab tshem tawm.
4.2 Media Configuration
Tom qab ntxiv cov wireless trunking gateway neeg siv, koj tuaj yeem hloov kho tus neeg siv lub suab encoding txoj kev, DTMF hom, RTP kis tau tus mob ncua sij hawm, DTMF load nyob rau hauv [Advanced/Media Configuration], thiab nias "nyob rau hauv lub coj tus neeg siv lub lag luam kem.
"Hloov lub cim, pop up raws li pom hauv daim duab 4-2-1:
Daim duab 4-2-1
- Kev hais lus encoding hom: suav nrog G711a, G711u
- DTMF hom: suav nrog RFC2833, SIPINFO, INBAND (hauv-band)
- RTP xa ib ntus: lub sijhawm luv rau lub suab pob ntawv xa mus, default 20ms (tsis pom zoo los hloov kho)
- DTMF load: payload, default siv 101
4.3 PSTN_COR Configuration
Hauv [Advanced/PSTN_COR], koj tuaj yeem teeb tsa cov neeg siv PSTN_COR cov ntaub ntawv, raws li pom hauv daim duab 4-3-1:
Daim duab 4-3-1
- COR polarity: Vitex vertex2100 / vertex2200, qib siab nquag nquag Moto GM3688, nquag qis
- COR nrhiav kom pom lub sijhawm txwv: lub sijhawm nruab nrab ntawm ob COR snatches (siv qhib COR snatches)
- Lub Suab COR qhov tseem ceeb: plaub kab thiab IP xov tooj hais lus tib lub sijhawm, qhib kom ntseeg tau tias cov neeg siv plaub kab yog lub ntsiab
4.4 NET_COR Configuration
Hauv [Advanced/NET_COR], koj tuaj yeem teeb tsa cov neeg siv NET_COR cov ntaub ntawv, raws li pom hauv daim duab 4-4-1:
Daim duab 4-4-1
- COR hom: xaiv lub suab nrhiav (VOX), lub suab dual dhau, tham nrog tus xov tooj IP
Xaiv Off rau ib nrab-duplex hu nrog POC cov neeg siv
- Kev Tshawb Nrhiav Lub Suab: Tshawb nrhiav lub suab pob ntawv ntawm sab Network thiab tuaj yeem teeb tsa nrog qhov pib tshawb pom. Qhov siab dua tus nqi pib, lub suab nrov yuav tsum tau qhib lub COR teeb liab, thiab rov ua dua.
4.5 Tau txais kev teeb tsa
Hauv [Advanced/Gain Configuration], koj tuaj yeem teeb tsa hom nce ntawm tus neeg siv, raws li pom hauv daim duab 4-5-1:
Daim duab 4-5-1
- A->D nce: qhov nce ntawm analog sab mus rau sab digital.
- D-> A nce: qhov nce ntawm sab digital mus rau sab analog.
4.6 Callback configuration
Hauv [Advanced/Chase Call Configuration], koj tuaj yeem teeb tsa tus neeg siv txoj kev hu xov tooj, lub sijhawm luv, thiab yuav ua li cas thiaj li hu xov tooj tshiab thaum caum, raws li qhia hauv daim duab 4-6-1:
Daim duab 4-6-1
- 4XX caum hu: Thaum tus neeg siv lub rooj vag wireless pib hu, qhov kev hu xov tooj tau tshwm sim thaum lub softswitch teb nrog "4XX" cov lus qhia tias kev hu ua tsis tiav.
- Thaum BYE caum hu: tus neeg siv lub rooj vag wireless pib hu, thiab thaum lub softswitch teb nrog cov lus "BYE" los qhia qhov kawg ntawm kev hu, chase hu muaj nuj nqi.
- Kev hu xov tooj tshiab hauv kev caum: Tus neeg siv lub rooj vag wireless tau tshwm sim los caum lub luag haujlwm hu, thiab kev ua haujlwm tau teeb tsa thaum muaj kev hu xov tooj tshiab tuaj rau lub sijhawm no.
- Hu rau lub sijhawm: Lub sijhawm luv rau kev pib hu rau tus neeg siv.
Advanced Configuration
5.1 System Configuration
Nyob rau hauv [system configuration], cov yam ntxwv ntawm ncha tshem tawm, ntsiag to compression, lub sij hawm synchronization, ntev lub sij hawm tsis muaj suab packet ua, thiab prompted suab feem ntau yog siv. Lus Cim: Qhov system compatibility hom siv 0000w hom
5.1.1 Echo tshem tawm
Hauv [Advanced/Call settings], koj tuaj yeem qhib thiab tawm lub suab tshem tawm ua haujlwm, raws li pom hauv daim duab 5-1-1:
Daim duab 5-1-1
Thaum cov yam ntxwv no raug muab tua, hu nrog wireless trunking gateway cov neeg siv yuav ua rau ncha, uas cuam tshuam rau kev hu zoo thiab raug tua los ntawm lub neej ntawd.
5.1.3 Sijhawm synchronization
Hauv [Advanced /System Configuration], koj tuaj yeem xaiv lub sijhawm synchronization txoj kev, raws li qhia hauv daim duab 5-1-3:
Daim duab 5-1-3
5.1.3.1 SIP200OK synchronization
Thaum "SIP200OK Synchronization" raug xaiv hauv [Advanced Configuration/System Configuration], lub sij hawm ntawm 200OK cov lus tau txais los ntawm softswitch tom qab tus neeg siv pib sau npe yog synchronized nrog lub server thaum lub sijhawm sau npe.
5.1.3.2 NTP server synchronization
Hauv [Advanced /System settings], thaum koj xaiv "NTP Server Synchronization", ib daim teb rau nkag mus rau NTP server yuav tshwm rau hauv qab, raws li qhia hauv daim duab 5-1-4: Daim duab 5-1-4
Tom qab nkag mus rau NTP server IP chaw nyob, lub wireless cluster gateway synchronizes nrog no NTP server ib zaug thaum lub voj voog.
5.1.4 Lub sijhawm ntev tsis muaj lub suab ntim khoom ua haujlwm
Hauv [Advanced /System Configuration], koj tuaj yeem xaiv txoj hauv kev los tswj lub sijhawm ntev tsis muaj lub suab pob ntawv, raws li pom hauv daim duab 5-1-5:
Daim duab 5-1-5
- Txoj kev ib: tsis muaj kev ua haujlwm; tom qab lub sij hawm ntev nrhiav tsis tau lub suab ncua sij hawm, tsis muaj kev ua tiav thiab kev hu xov tooj tseem khaws cia.
- Txoj Kev 2: Tso tawm hu; tom qab lub sij hawm ntev tsis pom lub suab ncua sij hawm, hu xov tooj raug tso tawm thiab hu xov tooj xaus.
- Hom 3: Rov tsim kho qhov kev hu tsis raug tso tawm; tom qab lub sij hawm ntev nrhiav tsis tau lub suab ncua sij hawm, pib rov caw kom txuas ntxiv hu
5.1.5 Ceeb toom lub suab muaj nuj nqi
Hauv [Ntaus / tam sim no], koj tuaj yeem qhib thiab tawm lub suab ceeb toom ua haujlwm, raws li pom hauv daim duab 5-1-6:
Daim duab 5-1-6
Cov lus piav qhia muaj nuj nqi: Tom qab qhov hloov pauv tau qhib, cov neeg siv lub rooj vag wireless los tsim kom muaj lub suab los tsim kev hu, cov neeg siv tuaj yeem xa lawv lub suab nyiam. file, cov file txhawb au hom ntawv, lub suab uploaded file lub npe yuav tsum yog ring.au suab file tsuas yog ib qho, yuav rov ua qhov hloov
5.3 Cov Cai Hu Xov Tooj
Cov cai hu xov tooj tuaj yeem teev nyob rau hauv [Advanced Configuration/Dialing Rules], thiab cov cai hu xov tooj yog nyob rau hauv tus lej daim ntawv qhia hom. Sib npaug rau tus yuam sij '#'
Tus lej daim ntawv qhia kev cai yog raws li nram no:
- Cov cai hu xovtooj txhawb kev siv cov lej, “x”, “[]”.
"x" sawv cev rau txhua tus lej; “[]” sawv cev rau qhov ntau ntawm tus lej muaj nuj nqis.
Rau example, yog tias koj nkag mus rau txoj cai hu "1[3,4][2,3-7]xx", nws txhais tau tias thawj tus lej yog 1, tus lej thib ob yog 3 lossis 4, thiab tus lej thib peb yog 2 lossis tus lej ntawm 3 thiab 7 nrog 5 lossis ntau tus lej.
- Kev sib tw ntev tshaj plaws: Thaum ntau qhov kev sib tw txhua qhov sib luag raws nraim, txoj cai ntev raug xaiv los ua.
Rau example, yog tias koj teeb tsa txoj cai hu rau "7X" thiab "75X", nkag mus rau tus lej 75, nws yuav phim txoj cai hu rau 75X.
* Ceeb Toom: Tus lej xov tooj uas xaus nrog "#" yuav tsis raug raws li txoj cai hu.
5.4 Channel hloov
Hauv [Advanced /Channel Switching], cov channel ntawm channel 0 tuaj yeem xaiv tau, raws li pom hauv daim duab 5-4-1, qhov twg
Daim duab 5-4-1
Nco tseg: _ Tam sim no, kev hloov pauv channel tsuas yog rau 0 raws, thaum siv cov kev xaiv channel yuav tsum xaiv cov channel txhawb nqa
5.5 Lub Sijhawm Teeb Meem
Hauv [Advanced /Time settings], koj tuaj yeem teeb tsa ntau lub sijhawm-chav kawm tsis tau ntawm lub wireless trunking gateway system, raws li qhia hauv daim duab 5-5-1, qhov twg:
Daim duab 5-5-1
- Tau Txais Tus Neeg Siv Lub Sijhawm Sijhawm: Lub sijhawm ntawm DTMF txais tos thaum lub handset tawm-khoos thiab tso cai rau tus yuam sij intercom. Default: 12S
- Lub ncua sij hawm tseem ceeb: lub sij hawm siab tshaj plaws nruab nrab ntawm ob lub qhov tseem ceeb uas nyob ib sab. Default 3S
- Tsis Muaj Lub Pob Pob Max Length: Lub sij hawm siab tshaj plaws uas hu xov tooj kav tsis muaj suab. Default: 300S
- Ntev hu ntev: lub sij hawm tawm ntawm tsis hu. Default: 120S
- Dial Tone Length: Lub sijhawm ntev los ua si lub suab hu rau lub intercom thaum lub handset tsis sib txuas. Default: 3S
- Ringing duration: lub sij hawm ntawm lub suab nrov thaum lub handset mloog lub suab nrov nrov, thaum lub suab nrov, tsis muaj DTMF tau txais los ntawm intercom. vim: 1s
- Nres lub suab nrov: thaum mloog lub suab nrov nrov, lub sijhawm nres lub suab nrov, thaum tsis suab nrov, tuaj yeem tau txais DTMF los ntawm intercom. vim: 6s
- Intercom mloog tibneeg hu tauj coob lub suab ntev: qhov ntev ntawm lub intercom mloog tibneeg hu tauj coob lub suab thaum lub handset hangs, los yog lub opposite kawg hangs. Default: 3S
Cov lus nug txog xwm txheej
6.1 Cov xwm txheej sau npe
Hauv [Status / Registration Status], koj tuaj yeem ua tau view cov ntaub ntawv teev npe neeg siv, raws li pom hauv daim duab 6-1-1:
Daim duab 6-1-1
6.2 Kab xwm txheej
Hauv [Status / Line Status], koj tuaj yeem ua tau view kab xwm txheej xwm txheej, raws li qhia hauv daim duab 6-2-1:
Daim duab 6-2-1
Lub luag haujlwm tseem ceeb cov lus qhia siv
Hauv [Advanced/Code settings], koj tuaj yeem teeb tsa cov yuam sij ua haujlwm thaum ntxiv cov neeg siv lub rooj vag wireless, raws li pom hauv daim duab 7-1-1:
Daim duab 7-1-1
7.1 Hu rau cov lej ua haujlwm
Tus lej hu xov tooj yog "*9#", thaum koj hu xov tooj los ntawm tes, koj tuaj yeem nkag ncaj qha "*9# + tus xov tooj (xws li * 9# 8888)" thiab tom qab ntawd nias "OK" thiab tom qab ntawd nias PTT kom hu.
7.2 Picker Function Code
Lub luag haujlwm tseem ceeb ntawm tus neeg xaiv yog "*7#", thaum koj hu xov tooj los ntawm tes, koj tuaj yeem ua ntej nkag "*7#" thiab nias PTT, tshem tawm "*7#" ua haujlwm code tom qab mloog lub suab nrov, sau tus lej xov tooj, nias "OK", thiab tom qab ntawd nias PTT hu.
7.3 Hang-up function code
Hang-up function code default is “*0#”, handheld and phone in the call, handheld input “*0#” and press “OK”, ces nias PTT, handheld mloog lub suab tsis khoom, hu dhau lawm.
7.4 Cov Kab Kub Kub Ua Haujlwm Code
- Thaum qhib qhov tseem ceeb muaj nuj nqi: lub neej ua haujlwm hotline code yog "*8#", tus neeg siv lub rooj vag lub rooj sib tham wireless tau teeb tsa tus lej xov tooj, tuav cov tswv yim "*8#" thiab nias "OK" thiab tom qab ntawd nias PTT, tus lej xov tooj sib txuas rau lub xov tooj hu.
- Thaum qhib PPT tus xov tooj hu xov tooj: nias PTT ncaj qha thiab tus xov tooj xov tooj hu ncaj qha
7.5 Tig tawm lub chase function code
Lub neej ntawd code los tua cov haujlwm khiav yog "*1#". Yog hais tias tus neeg siv lub rooj vag lub rooj vag wireless tig rau ntawm txoj haujlwm caum thiab ua rau lub luag haujlwm khiav tom qab hu tsis ua haujlwm, nyob rau lub sijhawm pib ntawm kev pib caum tom ntej, tus tuav tau nkag mus rau "* 1 #" thiab nias "OK" thiab tom qab ntawd nias PTT kom tsis txhob pib khiav.
Kev tswj hwm qhov system
8.1 Log Management
Log servers, cav theem, thiab lwm yam tuaj yeem teeb tsa hauv [Ntaus / Log Management], raws li qhia hauv
Daim duab 8-1-1, qhov twg:
Daim duab 8-1-1
Log theem: suav nrog “yuam kev”, “alarm”, “yooj yim”, “txheej txheem”, “debug”, “paj meej”, coj mus rau lub log lv.0 rau lv.6. Cov qib siab dua, cov lus qhia ntxaws ntxiv.
Log server chaw nyob: IP ntawm lub cav server.
Log server txais chaw nres nkoj: qhov chaw nres nkoj ntawm lub cav server kom tau txais cov cav.
Xa qhov chaw nres nkoj: Qhov chaw nres nkoj ntawm lub rooj vag wireless xa cov cav.
490 nti debug chaw nres nkoj: chaw nres nkoj rau debugging 490.
8.2 Hloov kho Software
Lub wireless trunking gateway system tuaj yeem hloov kho hauv [Ntaus/Software Upgrade], raws li qhia hauv daim duab 8-2-1:
Daim duab 8-2-1
Nyem , xaiv eagos upgrade program nyob rau hauv lub qhov rais pop-up, xaiv nws thiab nias , ces thaum kawg nias lub khawm ntawm lub web nplooj. Lub kaw lus yuav cia li thauj cov pob txhim kho, thiab yuav rov pib dua tom qab kev txhim kho tiav.
8.3 Cov khoom siv ua haujlwm
Hauv [Ntaus / Ntaus Kev Ua Haujlwm], koj tuaj yeem ua tau: rov qab, rov pib dua, qhov system thaub qab rollback, cov ntaub ntawv ntshuam thiab xa tawm cov haujlwm ntawm lub rooj vag wireless lub cev, raws li qhia hauv daim duab 8-3-1, qhov twg:
Daim duab 8-3-1
Restore Hoobkas nqis: Nyem qhov khawm yuav rov qab kho lub Wireless Trunked Gateway configuration rau Hoobkas chaw, tab sis yuav tsis cuam tshuam rau qhov system IP chaw nyob cov ntaub ntawv.
Reboot lub cuab yeej: Nyem qhov khawm yuav reboot lub cuab yeej rau kev ua haujlwm Wireless Trunked Gateway.
System Backup: Nyem qhov khawm yuav thaub qab DriverTest, Driver_Load, KeepWatchDog, VGW.ko, VoiceGw, VoiceGw.db rau cov npe hauv /var/cgi_bakup/backup.
System Rollback: Nyem khawm, nws yuav siv lub files tom qab lub kaw lus backup thiab overwrite qhov tam sim no files. Nws yuav rov pib dua tshiab tom qab rollback.
Data Export: Nyem qhov khawm kom tau ntim pob VoiceGw.db. Tom qab ntawd, lub qhov rai pop-up yuav tshwm sim los xaiv qhov chaw khaws cia thiab rub tawm mus rau lub PC hauv zos ntawm webnplooj.
Cov ntaub ntawv import: Nyem , thiab xaiv tus zip file rub tawm mus rau lub PC hauv zos tom qab cov ntaub ntawv xa tawm hauv lub qhov rai pop-up, thiab nyem Qhib. Nyem qhov Ntshuam khawm ntawm lub web nplooj ntawv dua, thiab nws yuav rov pib dua tom qab ua tiav ntshuam.
Nco tseg: Lub wireless rooj vag system thaub qab tsuas yog khaws ib qho thaub qab xwb. Ntawd yog, tsuas yog qhov kev pabcuam thaub qab kawg nkaus thiab cov ntaub ntawv tuaj yeem khaws cia rau rollback.
8.4 Version ntaub ntawv
Tus lej version ntawm cov kev pab cuam thiab cov tsev qiv ntawv files ntsig txog lub wireless pawg rooj vag tuaj yeem ua tau viewed nyob rau hauv [Status/Version Information], raws li qhia nyob rau hauv daim duab 8-4-1:
Daim duab 8-4-1
8.5 Tswj Account
Tus password rau web tus ID nkag mus tuaj yeem hloov pauv hauv [Ntaus / Nkag Nkag Ua Haujlwm], raws li pom hauv daim duab 8-5-1:
Daim duab 8-5-1
Hloov tus password: Sau tus password tam sim no hauv tus password qub, sau tus password tshiab thiab paub meej tus password tshiab nrog tib tus password hloov kho, thiab nyem rau ntawm khawm kom ua tiav qhov hloov password.
Default Password: Nyem web nplooj ntawv raws li lub neej ntawd.
Lub npe nkag rau lub neej ntawd yog: "admin"; tus password yog "1".
Daim Ntawv Ntxiv I: Cov lus qhia siv tseem ceeb ua haujlwm
9.1 Nruam dialing Function Code
Tus lej hu xov tooj yog "*9#", thaum koj hu xov tooj los ntawm tes, koj tuaj yeem nkag ncaj qha "*9# + tus xov tooj (xws li * 9# 8888)" thiab tom qab ntawd nias "OK" thiab tom qab ntawd nias PTT kom hu.
9.2 Picker Function Code
Lub luag haujlwm tseem ceeb ntawm tus neeg xaiv yog "*7#", thaum koj hu xov tooj los ntawm tes, koj tuaj yeem ua ntej nkag "*7#" thiab nias PTT, tshem tawm "*7#" ua haujlwm code tom qab mloog lub suab nrov, sau tus lej xov tooj, nias "OK", thiab tom qab ntawd nias PTT hu.
9.3 Hang-up function code
Hang-up function code default is “*0#”, handheld and phone in the call, handheld input “*0#” and press “OK”, ces nias PTT, handheld mloog lub suab tsis khoom, hu dhau lawm.
9.4 Cov Kab Kub Kub Ua Haujlwm Code
- Thaum qhib qhov tseem ceeb muaj nuj nqi: lub neej ua haujlwm hotline code yog "*8#", tus neeg siv lub rooj vag lub rooj sib tham wireless tau teeb tsa tus lej xov tooj, tuav cov tswv yim "*8#" thiab nias "OK" thiab tom qab ntawd nias PTT, tus lej xov tooj sib txuas rau lub xov tooj hu.
- Thaum qhib PPT tus xov tooj hu xov tooj: nias PTT ncaj qha thiab tus xov tooj xov tooj hu ncaj qha
9.5 Tig tawm lub chase function code
Lub neej ntawd code rau kaw lub chase muaj nuj nqi yog "*1#", tus neeg siv ntawm lub wireless trunk gateway tig rau lub chase muaj nuj nqi thiab ua rau lub chase muaj nuj nqi tom qab hu tsis ua hauj lwm, nyob rau hauv lub sij hawm luv luv ntawm pib lub tom ntej no chase, tus handheld nkag mus rau "* 1#" thiab nias "OK" thiab ces nias PTT, tsis muaj ntxiv chase hu yuav pib.
Cov ntaub ntawv / Cov ntaub ntawv
 |
OpenVox RIU Wireless Trunking Gateway Module [ua pdf] Phau ntawv qhia UCP1600, 2120, 4131, RIU Wireless Trunking Gateway Module, RIU, Wireless Trunking Gateway Module, Trunking Gateway Module, Rooj vag Module, Module |