GY-Z6E 3-in-1 Fast Wireless Charger
Manufacturer: Guanyu (Shenzhen) Electronic Technology Co.,Ltd.
Product Introduction
The GY-Z6E is a 3-in-1 wireless charger designed to power multiple devices simultaneously from a single outlet. It supports charging a mobile phone, an Apple Watch, and AirPods (1st Gen, 2nd Gen, or Pro) at the same time. Simply place your devices on the charger to initiate wireless charging, promoting a tidy desk and simplifying your life. Its space-saving design integrates well with modern lifestyles, especially for Apple users. The charger features an attractive LED light with a breathing effect to indicate charging status.
Product Appearance
The charger features a sleek, modern design. Key components include:
- ? Main wireless charging area for phones.
- ⌚ Magnetic wireless charging area specifically for Apple Watches.
- ? Earphone charging connector for AirPods cases.
- ? LED Intelligent light indicator.
- ? Type-C port for power input.
- ⬇️ Non-slip mats on the base and charging surfaces to prevent devices from sliding.
- Radiator holes for heat dissipation.
- Product tag with model information.
Operation Steps
Connecting the Power
1. Connect the charger to a compatible power adapter (9V/2A, 9V/2.7A, or 12V/2A) using a Type-C quick charge cable to power on the device.
Charging Devices
2. Place your smartphone on the main wireless charging area to begin charging.
3. Attach your Apple Watch to the magnetic charging area; it will align and charge automatically.
4. Connect your AirPods charging case to the designated earphone charging connector.
LED Indicator Lights
- ? Green light is on: Indicates standby mode or that the phone is not currently charging.
- ? Blue light is breathing: Indicates that the phone is wirelessly charging.
- ? Blue and Green lights flash: Indicates a foreign object is detected or the phone is misaligned. Charging will stop automatically in this state.
Charging Schematic Diagram
The charger is designed for simultaneous charging of up to three devices. Smartphones can be placed either vertically or horizontally on the main charging pad. Apple Watches attach magnetically to their dedicated area. AirPods (1st Gen, 2nd Gen, or Pro) connect to the specific earphone charging port.
Note: All devices must meet the Qi wireless charging standard.
Applicable Devices
Smartphones
- Apple: iPhone 12, 12 Pro, 12 Pro Max, 12 mini, SE, 11, 11 Pro, 11 Pro Max, Xs, Xs Max, XR, X, 8, 8 Plus.
- Samsung: Galaxy S20 5G, S20+ 5G, S20 Ultra 5G, S10, S10+, S10e, S9, S9+, S8, S8+, S7, S7 edge, S6, S6 edge, S6 edge+, S6 G9209, S6 Active; Galaxy Note: 10, 10e, 10+, 9, 8, 7, 6, 5.
- LG: G2 (VS980, Verizon version), G3, G6, G6+, G7, G7 ThinQ, G7+ ThinQ, G8, G8 ThinQ, V30, V30+, V35, V40 ThinQ, V50, V50 ThinQ, LG Lucid2 (VS870), LG Optimus F5 (As870), LG Optimus Vu 3, Spectrum 2, Optimus G Pro, Optimus Vu II, Optimus LTE 2, etc.
- MOTOROLA: Droid Turbo, Droid Turbo 2, Droid 5, Moto Maxx, Ultra M, Moto X Force.
- Huawei: P40 Pro, P30 Pro; Mate: 30 5G, 30 Pro 5G, 30, 30 Pro, 30 RS, 20 Pro, 20 RS, RS.
- Xiaomi: 10, 10 Pro, 9, 9 Pro, Mix 3, Mix 2s.
- Including other devices with built-in wireless charging receivers.
For some devices, an external wireless charging receiver may be required.
Smartwatches
- Apple: iWatch S1, S2, S3, S4, S5, S6, SE.
Earphones
- Apple: AirPods 1, AirPods 2, AirPods Pro.
Product Specifications
| Parameter | Specification |
|---|---|
| Input | 9V/2A, 9V/2.7A, or 12V/2A (Use 9V/2.7A or 12V/2A when charging 3 devices including a 15W fast charging phone) |
| Phone Output | 15W / 10W / 7.5W / 5W |
| Watch Output | 2.5W (Apple iWatch S1, S2, S3, S4, S5, S6, SE) |
| Earphone Output | 2.0W Lightning (Apple AirPods 1, 2, AirPods Pro) |
| Input Interface | Type-C port |
| Transmission Distance (Phone) | < 8mm |
| Conversion Rate (Phone) | > 73% |
| Product Size | 142 x 70 x 18.7 mm |
Accessories List
- Wireless Charger x 1
- Type-C quick charge cable x 1
- User Manual x 1
Attention
- Please keep the charger away from water or other liquids.
- If cleaning is required, ensure the charger is disconnected from the power supply.
- Recommended operating temperature: 0-45°C (32-113°F).
- Charging environment temperature for smartphones should not exceed 55°C (131°F).
Frequently Asked Questions & Troubleshooting
Interrupted or Slow Charging
- Ensure the back of your phone does not have metal attachments, pop sockets, or credit cards.
- Place the phone in the center of the charging surface to align the charging coils.
- Note: The wireless charging coil on some Sony phones is located slightly below the center.
- Phone cases should be no thicker than 5 mm for effective charging.
- Verify that the connected adapter is a QC3.0 fast charger.
Failing to Charge Device
- Try restarting your cell phone and testing with another USB cable.
- Check if the indicator light on the charger is on.
- Ensure the adapter is a QC3.0 Quick Charger (Output: 9V/2A). The original iPhone adapter may not be compatible.
- Confirm your phone case thickness is less than or equal to 5mm. Metal rings or magnetic pads on the case will prevent charging.
Persistent Issues
If you are still experiencing issues after following the above steps and using a recommended QC3.0 adapter:
- Try replacing the cable connecting the wireless charger to the adapter.
- Reboot your phone.
- Unplug the adapter from the power source and plug it back in.
Compliance Information
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During operation, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
The product also bears CE, FC, and ROHS certifications.
