GY-Z5A 3-in-1 Fast Wireless Charger
User Manual
Product Introduction
The 3-in-1 wireless charger is a multi-function charging station designed to charge three smart devices (Qi smartphone, iWatch, and earbuds) simultaneously. It is compatible with Qi-enabled smartphones, iWatch, AirPods, and most Android earbuds. Its unique design features an elegant appearance, making it perfect for use at the office or home. It offers a convenient charging experience, especially for Apple users, with built-in over-charge protection and FOD (Foreign Object Detection) function for safe operation. A touch-sensitive switch allows for turning the LED light ON/OFF.
Product Appearance
The charger's components include:
- iWatch Charging Area
- Phone Charging Area
- Earbuds Charging Area
- Type-C Port
- Light Switch
- Cooling Vent
- Anti-Slip Silicone
- LED Indicate Light
- Screw
- Label Area
How to Use
- Plug the Type-C cable into the wireless charger to power it on.
- Place your smartphone on the charging station and ensure it is charging.
- Put your Apple Watch on the iWatch charging area to start charging.
- Place your earbuds on the charging station and ensure they are charging.
LED Light Instructions
- Green light on: Standby mode
- Blue light breathing: Phone charging
- Blue and green flashing: Foreign object detection working
Touch the light switch to turn the LED light ON/OFF.
Charging Schematic Diagram
This section illustrates the charging capabilities. It shows how to charge three Apple devices simultaneously, with the phone capable of charging vertically or horizontally, even with a non-metallic case. It also depicts charging for mixed Apple and Android devices, and Samsung Bluetooth earbuds.
The diagram visually represents a smartphone placed on the central charging pad, an Apple Watch on its dedicated charger, and TWS earbuds on their designated spot, all connected via a Type-C cable to a power source.
Applicable Devices
Smartphones
- Apple: iPhone 12, 12 Pro, 12 Pro Max, 12 mini, SE, 11, 11 Pro, 11 Pro Max, Xs, Xs Max, XR, X, 8, 8 Plus
- Samsung: Galaxy S: 21 5G, 21+ 5G, 21 Ultra 5G, FE 5G, 20 5G, 20+ 5G, 20 Ultra 5G, 10, 10+, 10e, 9, 9+, 8, 8+, 7, 7 edge, 6, 6 edge, 6 edge+, 6 G9209, 6 Active; Galaxy Note: 10, 10e, 10+, 9, 8, 7, 6, 5
- Huawei: P30 Pro, P40 Pro, P40 Pro+; Mate: 40E, 40 RS, 40 Pro+, 40 Pro, 40, 30E Pro, 30 5G, 30 Pro 5G, 30, 30 Pro, 30 RS, 20 Pro, 20 RS, RS
- Xiaomi: 10, 10 Pro, 9, 9 Pro, Mix 3, Mix 2s
- Including other devices with wireless charging receivers built-in (Note: All devices must meet the Qi standard).
Smart Watches
- Apple: iWatch S2, S3, S4, S5, S6, SE
Earbuds
- Apple: AirPods 2, AirPods Pro
- Samsung: Galaxy Buds/Buds+/Buds Pro/Buds Live
- Huawei: Freebuds 2/3/4/Pro
- And more TWS (with wireless charging case).
Product Specification
| Input | 9V/2A |
| Phone Output | 15W/10W/7.5W/5W |
| Watch Output | 2.5W (Only compatible with Apple Watch S2/S3/S4/S5/S6/SE) |
| Earbuds Output | 3.0W |
| Input Socket | Type-C |
| Conversion Rate (Phone) | ≥73% |
| Product Size | 136(W) x 101(D) x 136(H) mm |
Packing List
- Wireless Charger * 1
- Type-C Quick Charge Cable * 1
- User Manual * 1
Warnings
- Avoid using the product in wet, humid, or high-temperature environments.
- Avoid dropping the product from high places.
- Do not disassemble the product. Contact support if necessary.
- Do not clean the product unless it is powered off.
- It is recommended to use an 18W or above adapter to charge 3 smart devices simultaneously.
Note: To ensure safe and efficient charging of three devices simultaneously, a 9V/2A adapter (Qualcomm Quick Charger 2.0 or 3.0) and a quick charge cable are required. Using an inappropriate adapter or cable may result in failure to charge, slow charging, or damage to the charger.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
[CE certified] [FCC certified] [RoHS compliant]
