3 IN 1 FOLDABLE WIRELESS CHARGER

Product Introduction

The 3-in-1 Wireless Charger is a multi-function charging station that allows you to charge three smart devices (smartphone, Watch, and earbuds) simultaneously. It is compatible with enabled smartphones, Apple Watches, and AirPods. Its unique design offers an elegant appearance, making it suitable for office or home use. It is particularly convenient for charging your smart devices.

[Description of the main product image: A black, foldable 3-in-1 wireless charging station. It features dedicated spots for a smartphone, an Apple Watch, and wireless earbuds. The charger can be used in a flat or folded position.]

Product Appearance

[Description of the product appearance image: The charger features distinct charging areas: one for earbuds (labeled 'Earbuds Charging Plug'), one for the phone (labeled 'Phone Charging Plug'), and an LED indicator light.]

Charging Method

Flat / Foldable

[Description of charging method image: Illustration showing the charger in its flat configuration with a phone charging, and in its folded configuration.]

LED Light Instructions

How to Use

[Description of the 'How to Use' diagram: Diagram illustrating the connection process: A Type-C cable connects the charger to a power adapter, which is then plugged into a wall socket.]

Note: To ensure safe and efficient charging of 3 devices, use a 9V/2A adapter or above (Qualcomm Quick Charger 2.0 or 3.0) and a fast charging cable. If you do not use a suitable adapter and fast charging cable, the charger may not be able to charge the phone, or may not charge 3 devices at the same time, or may even damage the charger.

Compatible Devices

• 1. iPhone: All Apple series
• 2. Apple Watch: Apple Watch S8/S7/S6/SE/S5/S4/S3/S2/Ultra/Hermès.
• 3. Earbuds: AirPods (1st generation) / AirPods (2nd generation) / AirPods Pro/AirPods (3rd generation).

Product Specification

• Input: 9V/2A
• Output (Phone): 5V/2A (10W Max)
• Output (Watch): 2.5W
• Output (Earbuds): 5V/1A (5W Max)
• Input Port: Type-C
• Conversion Rate: ≥70% (Phone)
• Product Size: 156x76x10mm (Folded)

Packing List

• 1. Plug-in charging X 1
• 2. User manual X 1
• 3. Type-C quick charging cable X 1

FAQ

• If you're experiencing interrupted or slow charging, check the following:
  • The back of your devices should not have any metal, pop sockets, or credit cards.
  • Put the devices in the center of the charging surface (this lets the charging coil in your device align with the one inside the wireless charger).
  • Check whether the adapter is QC 3.0 fast charger.
• If there are other problems, please contact after-sales for solution.

Tips

• This 3-in-1 wireless charging station only supports Apple Watch S8/S7/S6/SE/S5/S4/S3/S2/Ultra/Hermès. (Note: Apple watch series 1 is not supported)
• Do not charge the charging station of Apple products from the computer USB interface or other power converters.
• When charging, place the enabled device in the center of each wireless charging area.
• Make sure your device is in the middle of the cordless charger area.
• The silicone shell of iWatch and AirPods may cause abnormal charging. It is best to take it off before charging.

Warning

• Avoid using the product in places that are wet, humid or have high temperature.
• Avoid dropping the product from high places.
• Do not disassemble the product by yourselves. Please contact us if necessary.
• Do not clean the product unless it is powered off.
• It is recommended to use an 18W or above adapter to charge 3 smart devices at the same time.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Compliance Marks

• FC [Federal Communications Commission mark]
• CE [European Conformity mark]
• ♻️ [Recycling symbol]
• Made in China