GY-Z9T Wireless Charger User Manual
Version: V2 | Date: 2021-05-17
Product Overview
This document provides comprehensive information for the Guanyu GY-Z9T wireless charger, a multi-device charging station designed for modern electronic accessories.
Product Functionality
The GY-Z9T enables simultaneous wireless charging for multiple devices. Its design incorporates dedicated charging zones:
- Wireless charging area for compatible smartphones (e.g., iPhone 12 series).
- Wireless charging area for Apple Watch devices (Series 2-6/SE).
- Wireless charging area for Bluetooth headset charging cases.
- An integrated slot for Apple Pencil charging.
Diagram Description: The product features a main stand for a smartphone, a magnetic charging spot for an Apple Watch, a designated area for earbud cases, and a slot for an Apple Pencil. The base dimensions are approximately 90.00 mm x 90.00 mm.
Product Specifications & Compatibility
Applicable Mobile Phones: iPhone 12 series (12, 12 Pro, 12 mini, 12 Pro Max) and other Qi-compatible smartphones.
Applicable Earphones: Supports wireless charging of Apple earphone charging boxes (e.g., AirPods Pro) and other TWS earphones with wireless charging cases.
Applicable Watches: Supports Apple Watch 2-6/SE generation wireless charging.
TWS Bluetooth Earphones: Compatible with Apple AirPods 2, AirPods Pro, Samsung Galaxy Buds/Buds+/Buds Pro/Buds Live, Huawei Freebuds 2/3/4i/Pro, and other TWS models equipped with wireless charging cases.
? Note: This product is not compatible with iWatch S1.
Important Usage Guidelines
Charging Requirements
⚠️ Important: For safe and efficient charging of up to 4 devices simultaneously, use a 9V/2A adapter (such as a Qualcomm Quick Charger 2.0 or 3.0) and a compatible quick charge cable. Using an inadequate adapter or cable may prevent charging, result in simultaneous charging failure, or potentially damage the device.
? Recommendation: As a four-in-one wireless charger, the power demand increases when multiple devices are charging. A charging head rated at 18W or higher is recommended for optimal performance.
Matters Needing Attention
- ? Environmental Safety: Do not expose the product to water or place it near fire sources to prevent equipment malfunction and damage.
- ⬇️ Physical Handling: Avoid dropping the device from a height to prevent damage from impact.
- ? Cleaning: Ensure the charger is disconnected from the power supply before cleaning.
Technical Specifications
| Parameter | Specification |
|---|---|
| Input Voltage | 9V/2A |
| Phone Output | 15W / 10W / 7.5W / 5W |
| Headphone Output | 3W |
| Watch Output | 2.5W |
| Apple Pencil Output | 1W |
| Frequency | 105-205 Khz |
| Receiving Distance | ≤8mm |
| Conversion Rate | ≥73% |
| Product Standards | Qi |
| Product Size | 137 x 98.9 x 141.1 mm |
Included Accessories
- 1 X Wireless Charger
- 1 X Type-C Quick Charge Cable
- 1 X User Manual
LED Indicator Status
| Status | Mobile Phone | Headset | Apple Watch |
|---|---|---|---|
| Standby | Green | Green | Green |
| In Charging | Blue | Blue | Blue |
| FOD (Foreign Object Detection) | Blue and Green Light Flash | X | X |
Note: 'X' indicates not applicable or not supported for this status/device.
Regulatory Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
