Electrolux Steam Iron
Instruction Book
Models: ES14007, EDB1720, EDB1730
WE'RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You've chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time.
Welcome to Electrolux.
Visit our website to:
- Get usage advice, brochures, trouble shooter, service information: www.electrolux.com
- Register your product for better service: www.electrolux.com/productregistration
- Buy accessories and consumables for your appliance: www.electrolux.com/shop
Iron shoe Ref: ECA 20
CUSTOMER CARE AND SERVICE
When contacting Service, ensure that you have the following data available:
- Model Number
- PNC number
- Serial number
The information can be found on the rating plate.
COMPONENTS
Diagram showing the steam iron with labeled parts:
- A. Soleplate
- B. Maximum water level indicator
- C. Filling aperture with cover
- D. Spray nozzle
- E. Spray button
- F. Steam jet button
- G. Steam selector/Self-cleaning
- H. Power indicator light
- I. Mains cable
- J. Hot Soleplate Indicator (* Certain models only)
- K. Temperature selector
- L. Water tank
- M. Cable wrap facility
- N. Iron heel
GETTING STARTED
- Before first use: Remove all adhesive remains and gently rub with a dampened cloth. Rinse the water tank to remove foreign particles. Temporary vapours/odours may occur when first turned on.
- Filling the steam iron with water: Ensure the plug is removed from the power outlet. Turn the steam selector to "OFF" and open the filling aperture cover. Using the provided beaker, pour water up to the maximum level. Raise the tip of the iron to prevent overflowing while pouring. Close the cover. This product is appropriate for use with tap water. It is recommended to use distilled water or a 50% distilled, 50% tap water mix.
- Plug in and heat up: Plug the power cable into a power outlet. Turn the temperature selector to the desired heat. The power indicator light indicates heating. When the light turns off, the iron is ready. Note: If lowering temperature during ironing, wait for the power indicator light to turn on again.
- Iron with steam: Turn the steam selector to a position between "OFF" and " " (depending on desired steam). For ironing without steam, set the selector to "OFF". Note: The iron gives continuous steam when held horizontally. Stop steam by placing the iron vertically or turning the selector to "OFF".
- Using the spray mist and steam jet function: Ensure the water tank is at least 1/4 full. Use the spray button for a fine mist to pre-dampen fabrics. For the steam jet function, ensure the tank is at least 1/2 full. Press the steam jet button several times to prime the pump.
- Steaming hanging items: The vertical steam jet function is ideal for steaming curtains, suits, and delicate fabrics. Hang the item on a hanger, hold the iron 10–20 cm away, and press the steam jet button.
- Storage: Switch off the appliance before connecting or disconnecting the mains plug. Never pull the supply cord; grasp the plug and pull. Empty the water tank and let the iron cool completely before storage.
- Cleaning exterior surfaces: Always store the iron on its heel rest with the cord loosely wrapped. Use a damp soft cloth and wipe dry. Do not use chemical solvents.
- Self-cleaning function: Hold the iron over a sink. Fill the filling aperture with water. Heat up the iron. Move the steam button to the self-cleaning position, hold for 60 seconds to empty water from the steam holes. Release the button to stop.
- Cleaning the soleplate: Do not use scouring pads or harsh cleaners. To remove burnt residue, iron over a damp cloth while the iron is hot. For general cleaning, wipe with a soft damp cloth and dry.
- ThermoSafe™ Indicator: Your appliance has a ThermoSafe™ indicator that changes colour from black to red when the soleplate is hot. It turns back to black when the soleplate temperature is below 40°C, indicating it's ready for storage.
SAFETY ADVICE
- This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, if they are supervised or have received instructions on safe use and understand the hazards.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be done by children without supervision.
- Keep the iron and its cord out of reach of children under 8 years of age when it is energized or cooling down.
- Surfaces are liable to get hot during use.
- This product is appropriate for use with tap water. Distilled water or a 50% distilled, 50% tap water mix is recommended.
- Connect only to a power supply matching the voltage and frequency specifications on the rating plate.
- Do not use the iron if it has been dropped, if there are visible signs of damage to the iron or cord, or if it is leaking.
- Connect only to an earthed socket.
- The filling aperture must not be opened during use.
- If the appliance or supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazard.
- Use and rest the iron on a stable surface. Ensure the surface supporting the iron's stand is stable.
- Never leave the appliance unattended while connected to the mains supply.
- Switch off and withdraw the mains plug after each use, before cleaning, and maintenance.
- Remove the plug from the socket outlet before filling the water reservoir.
- The mains cable must not come into contact with any hot parts of the appliance.
- Do not immerse the appliance in water or any other liquid.
- Do not exceed the maximum filling volume indicated on the appliance.
- This appliance is intended for domestic use only. The manufacturer accepts no liability for damage caused by improper or incorrect use.
- Be careful when turning a steam iron upside down, as hot water may remain in the reservoir.
IRONING CHART
| FABRIC | TEMPERATURE SETTING | IRONING RECOMMENDATION |
|---|---|---|
| Acrylic | • | Dry iron on the wrong side. |
| Acetate | • | Dry iron on the wrong side while still damp or use spray to dampen. |
| Nylon & Polyester | • | Iron on the wrong side while still damp or use spray to dampen. |
| Rayon | • | Iron on the wrong side of fabric. |
| Viscose | • | Mainly dry iron. Steam can be used under manufacturer's instructions. |
| Silk | • | Iron on the wrong side. Use an ironing cloth to prevent shine marks. |
| Cotton blends | •• | Check the label and follow the manufacturer's instructions. Use setting for the fibre requiring the lowest setting. |
| Wool & Wool blends | •• | Steam iron on the wrong side or use ironing cloth. |
| Cotton | •• | Dry iron while still damp or use spray to dampen. Use steam medium to high. |
| Corduroy | ••• | Steam iron on the wrong side or use ironing cloth. |
| Linen | ••• to "MAX" | Iron on the wrong side or use ironing cloth to prevent shine marks, especially with dark colours. Dry iron while still damp or use spray to dampen. Use steam medium to high. |
| Denim | •••• to "MAX" | Use maximum steam. |
Variations in ironing speed and fabric dampness might cause optimal settings to differ from those recommended in the table.
TIPS AND TRICKS
Temperature settings
The iron heats up faster than it cools down. Start ironing fabrics requiring the lowest temperature first. Use the lowest temperature for fabrics with unusual finishes like sequins or embroidery. If unsure about the fabric, start with a low temperature and iron on a hidden corner, then increase the temperature gradually if needed.
Avoiding marks on the fabric
Never iron over traces of perspiration or other marks, as heat fixes stains onto the fabric.
Washing fabrics before ironing
If the washing machine is heavily loaded or the spin drying revolutions are very high, fabrics may come out more creased. However, many fabrics are easier to iron if they are damp.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| The soleplate is not heating even though the iron is turned on. | Connection problem. The temperature selector is in "MIN" position. | Check the main power supply cable, plug, and outlet. Select adequate temperature. |
| The iron does not produce steam. | Not enough water in tank. Steam selector is set in non-steam position. The selected temperature is lower than that specified to use with steam. | Fill the water tank (see "Getting started", no 2). Set the steam selector between positions of minimum steam and maximum steam (see "Ironing chart"). Increase the temperature to at least . |
| The spray function does not work. | Not enough water in tank. | Fill the water tank (see "Getting started", no 2). |
| The steam jet and vertical steam jet functions do not work. | The steam jet function was used very frequently within a short period. The iron is not hot enough. | Place the iron in a horizontal position and wait before using the steam jet function. Adjust the proper temperature for steam ironing (up to ). Place the iron in a vertical position and wait until the temperature indicator light turns off. |
| Brown streaks come out of the soleplate while ironing and stain the linen. | You have used hard water, which has caused scale flakes to develop in the water tank. You have used chemical descaling agents. Fabric fibres have accumulated in the holes of the soleplate and are burning. The fabrics might not be properly rinsed, or the garments are new and have not been washed before ironing. | Use the self-clean function one or more times. Do not use any descaling agents. Use the self-clean function one or more times. Clean the soleplate with a damp soft cloth. Please rinse the laundry properly again. |
DISPOSAL
This symbol on the product indicates it contains a battery that should not be disposed of with normal household waste.
This symbol on the product or packaging indicates it should not be treated as household waste. To recycle your product, take it to an official collection point or an Electrolux service center for safe and professional battery and electric parts removal and recycling. Follow your country's regulations for separate collection of electrical products and rechargeable batteries.
Electrolux reserves the right to change products, information, and specifications without notice.
