Logicbus M-7017Z 10/20 Channel Tam sim no thiab Voltage Analog Input Module

Phau Ntawv Qhia Pib Ceev

Khoom siv:

http://www.icpdas-usa.com/m_7017z.html
http://www.icpdas-usa.com/dcon_utility_pro.html

Taw qhia

M-7017Z muaj software configurable raws - los ntawm 10 qhov sib txawv raws mus rau 20 ib qho kawg nkaus. Ob leeg voltage thiab tam sim no txais: ± 150mV, ± 500mV, ± 1V, ± 5V, ± 10V, ± 20mA, 0 ~ 20mA, thiab 4 ~ 20mA. Tsis muaj lwm yam resistor xav tau los ntsuas qhov tam sim no, txhua yam koj yuav tsum ua yog qhib lub plhaub ua ntej thiab ua kom tiav qhov teeb tsa los ntawm jumper. Kev ntsuas tam sim no yooj yim li koj xav! M-7017Z kuj dhau 240Vrms dhau voltage tiv thaiv kev sib txawv inputs thiab 150Vrms tshaj voltage kev tiv thaiv rau ib leeg inputs, 3000VDC intra-module cais, +/-4KV tiv tauj ESD tiv thaiv, +/-4KV EFT tiv thaiv lub zog, thiab +/-1KV EFT tiv thaiv rau RS-485. Cov sampling tus nqi ntawm M-7017Z yog hloov tau. Muaj hom ceev thiab hom ib txwm rau koj xav txog. Fast hom yog 60Hz nrog 12 ntsis daws teeb meem. Hom Hom yog 10Hz nrog 16 ntsis daws teeb meem.

Terminal Assignment

Block/wiring Diagram

Default Settings

Default settings rau M-7017, M-7018 thiab M-7019 series modules yog:

• Raws tu qauv: Modbus RTU
• Module chaw nyob: 01
• Analog input hom:
  • Hom 08, -10V rau 10V, rau M-7017 thiab M-7019 series
  • Hom 1B, -150V rau 150V, rau M-7017R-A5
  • Hom 0D, -20mA rau +20mA rau M-7017C thiab M-7017RC
  • Hom 05, -2.5V rau 2.5V, rau M-7018 series
• Baud Rateib: 9600
• Lim teeb ntawm 60Hz tsis lees paub (Tsis siv los ntawm M-7019R, firmware version B2.6 thiab ntxov dua)

Kev teeb tsa

Txhawm rau nruab lub module, ua raws li cov kauj ruam hauv qab no:

1. Txuas lub thermistor analog input.
2. Txuas lub module rau RS-485 network siv DATA + thiab DATA-terminals. Yog tias tus tswv tsev tsuas yog nruab nrog RS-232 interface, ces yuav tsum muaj RS-232 rau RS-485 converter.
3. Txuas lub module rau lub hwj huam mov siv lub + Vs thiab GND terminals. Nco ntsoov tias voltage muab yuav tsum nyob rau hauv thaj tsam ntawm +10 txog +30V DC.
4. Qhib DCON utility pro
   1. nyem rau ntawm COM chaw nres nkoj (thawj lub cim).
   2. Nws tuaj yeem xaiv ntau yam kev xaiv xws li Baud Rate, Protocol, Checksum, thiab Hom rau kev tshawb nrhiav module. Lub neej ntawd chaw rau lub module tuaj yeem pom nyob rau hauv Tshooj 3. Nyem OK tom qab xaiv qhov chaw nres nkoj COM.
5. DCON utility pro yuav tshawb nrhiav COM chaw nres nkoj raws li qhov teeb tsa yav dhau los. DCON Utility Pro txhawb nqa DCON thiab Modbus raws tu qauv rau tag nrho ICPDAS thiab lwm cov qauv.
6. Configuration I/O module teeb tsa ntawm PC
7. Rau M-7000 modules siv Modbus RTU raws tu qauv, teeb tsa lub module siv cov haujlwm hauv qab no.
   1. Sub-function 04h of Function 46h, saib cov neeg siv phau ntawv Tshooj 3.3.2 Sub-function 06h ntawm Function 46h, saib cov neeg siv phau ntawv
   2. Seem 3.3.4 Sub-function 08h of Function 46h, saib cov neeg siv phau ntawv Tshooj 3.3.6
8. Rau M-7000 modules siv Modbus RTU raws tu qauv, siv Function 04h los nyeem cov ntaub ntawv los ntawm cov kev tawm tswv yim. Saib cov neeg siv phau ntawv Tshooj 3.2 kom paub meej.
9. Yog tias tus neeg siv tsis paub cov lus txib, tus neeg siv tuaj yeem xaiv Chaw Nyob thiab ID, nws yuav qhia qee cov lus txib raws li hauv qab no. Cov neeg siv tuaj yeem xaiv cov lus txib tsim nyog los sim lossis kho qhov teeb meem modules.

Cov ntaub ntawv / Cov ntaub ntawv

Logicbus M-7017Z 10/20 Channel Tam sim no thiab Voltage Analog Input Module [ua pdf] Cov neeg siv phau ntawv qhia M-7017Z 10 20 Channel Tam sim no thiab Voltage Analog Input Module, M-7017Z, 10 Channel Tam sim no thiab Voltage Analog Input Module, 20 Channel Tam sim no thiab Voltage Analog Input Module, Tam sim no thiab Voltage Analog Input Module, Tam sim no Analog Input Module, Voltage Analog Input Module, Analog Input Module, Input Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv