8-channel Tam sim no Input Cov Ntaub Ntawv Tau Txais Module
Cov neeg siv phau ntawv qhia
M-7017C 8-channel Tam sim no Input Data Acquisition Module
Product Info:
http://www.icpdas-usa.com/m_7017c.html
http://www.icpdas-usa.com/dcon_utility_pro.html
Taw qhia
M-7017C yog 8-channel Analog Input cov ntaub ntawv tau txais tej thaj chaw deb I/O module uas txhawb Modbus RTU. Nws txhawb ob hom kev tawm tswv yim tam sim no +/-20mA, 0-20mA thiab 4-20mA (yuav tsum tau xaiv sab nraud 125ohm resistor). Nrog 240Vrms dhau-voltage kev tiv thaiv thiab 4KV ESD Kev Tiv Thaiv rau txhua qhov channel, nws muaj kev nyab xeeb thiab muaj txiaj ntsig zoo rau koj cov ntaub ntawv xav tau. Nws tuaj yeem tswj tau remotely siv cov txheej txheem hu ua DCON raws tu qauv. Nrog rau Modbus RTU raws tu qauv, nws tuaj yeem yooj yim sib txuas lus nrog feem ntau SCADA / HMI software thiab PLCs.
Terminal Assignment
Block/wiring Diagram
Default Settings
Default settings rau M-7017, M-7018, thiab M-7019 series modules yog:
▫ Txoj Cai: Modbus RTU
▫ Module chaw nyob: 01
▫ Analog input hom:
Hom 08, -10V rau 10V, rau M-7017 thiab M-7019 series
Hom 1B, -150V rau 150V, rau M-7017R-A5
Hom 0D, -20mA rau +20mA rau M-7017C thiab M-7017RC
Hom 05, -2.5V rau 2.5V, rau M-7018 series
▫ Baud Rate: 9600 bps
▫ Lim teeb ntawm 60Hz tsis lees paub (Tsis siv los ntawm M-7019R, firmware version B2.6 thiab ntxov dua)
Kev teeb tsa
Txhawm rau nruab lub module, ua raws li cov kauj ruam hauv qab no:
- Txuas lub thermistor analog input.
- Txuas lub module rau RS-485 network siv DATA + thiab DATA-terminals. Yog tias tus tswv tsev tsuas yog nruab nrog RS-232 interface, ces yuav tsum muaj RS-232 rau RS-485 converter.
- Txuas lub module rau lub hwj huam mov siv lub + Vs thiab GND terminals. Nco ntsoov tias voltage muab yuav tsum nyob rau hauv thaj tsam ntawm +10 txog +30V DC.
- Qhib DCON utility pro.
1. Nyem rau ntawm qhov chaw nres nkoj COM (thawj lub cim)
2. Nws tuaj yeem xaiv ntau yam kev xaiv xws li Baud Rate, Protocol, Checksum, thiab Hom ntawv los tshawb xyuas cov module. Lub neej ntawd chaw rau lub module tuaj yeem pom nyob rau hauv Tshooj 3. Nyem OK tom qab xaiv qhov chaw nres nkoj COM.
- DCON utility pro yuav tshawb nrhiav COM chaw nres nkoj raws li qhov teeb tsa yav dhau los. DCON Utility Pro txhawb nqa DCON thiab Modbus raws tu qauv rau tag nrho ICPDAS thiab lwm yam modules.
- Rau M-7000 modules siv Modbus RTU raws tu qauv, teeb tsa lub module siv cov haujlwm hauv qab no.
Sub-function 04h ntawm Function 46h, saib cov neeg siv phau ntawv Tshooj 3.3.2
Sub-function 06h ntawm Function 46h, saib cov neeg siv phau ntawv Tshooj 3.3.4
Sub-function 08h ntawm Function 46h, saib cov neeg siv phau ntawv Tshooj 3.3.6
Rau M-7000 modules siv Modbus RTU raws tu qauv, siv Function 04h los nyeem cov ntaub ntawv los ntawm cov kev tawm tswv yim. Saib cov neeg siv phau ntawv Tshooj 3.2 kom paub meej.
- Yog tias tus neeg siv tsis paub cov lus txib, tus neeg siv tuaj yeem xaiv Chaw Nyob thiab ID, nws yuav qhia qee cov lus txib raws li hauv qab no. Cov neeg siv tuaj yeem xaiv cov lus txib tsim nyog los sim lossis kho qhov teeb meem modules.
Cov ntaub ntawv / Cov ntaub ntawv
 |
Logicbus M-7017C 8-channel Current Input Data Acquisition Module [ua pdf] Cov neeg siv phau ntawv qhia M-7017C 8-channel Current Input Data Acquisition Module, M-7017C, 8-channel Current Input Data Acquisition Module, Tam sim no Input Data Acquisition Module, Input Data Acquisition Module, Data Acquisition Module, Tau Txais Module, Module |
