I-8-chaneli yeModyuli yokuFumana iNgcaciso yeNgcaciso yangoku
Isikhokelo somsebenzisi

I-M-7017C 8-ijelo leModyuli yokuFumana iNgeniso yeNgcaciso yangoku

 Ulwazi lweMveliso:
http://www.icpdas-usa.com/m_7017c.html
http://www.icpdas-usa.com/dcon_utility_pro.html

Intshayelelo

I-M-7017C yi-8-channel ye-Analog Input Data yokufumana imodyuli ekude ye-I/O exhasa i-Modbus RTU. Ixhasa zombini iintlobo zegalelo zangoku +/-20mA, 0-20mA kunye ne-4-20mA (ifuna i-resistor yangaphandle ye-125ohm ekhethiweyo). Nge 240Vrms over-voltagukhuseleko lwe-e kunye noKhuseleko lwe-4KV ESD kwitshaneli nganye, inikezela ngesisombululo esikhuselekileyo nesingabizi kakhulu kwiimfuno zakho zokufumana idatha. Inokulawulwa kude usebenzisa isethi yemiyalelo ebizwa ngokuba yiDCON protocol. Ngeprotocol ye-Modbus RTU, inokunxibelelana ngokulula ne-SCADA/HMI software kunye neePLCs.

Isabelo seTheminali

Ibhlokhi/ Idayagram yocingo 

Imimiselo ehlala ikho
Iisetingi ezihlala zikhona zeM-7017, M-7018, kunye neM-7019 iimodyuli zothotho zezi:
▫ Umgaqo-nkqubo: Modbus RTU
▫ Idilesi yemodyuli: 01
▫ Uhlobo longeniso lwe-analog:
Uhlobo lwe-08, -10V ukuya kwi-10V, kwi-M-7017 kunye ne-M-7019 series
Uhlobo lwe-1B, -150V ukuya kwi-150V, ye-M-7017R-A5
Uhlobo lwe-0D, -20mA ukuya +20mA ye-M-7017C kunye ne-M-7017RC
Uhlobo lwe-05, -2.5V ukuya kwi-2.5V, kwi-series ye-M-7018
▫ Umlinganiselo weBaud: 9600 bps
▫ Iseti yesihluzi ku-60Hz ukwaliwa (Asisetyenziswa yi-M-7019R, inguqulelo ye-firmware B2.6 nangaphambili)
Uqwalaselo
Ukufakela imodyuli, landela la manyathelo angezantsi:

1. Qhagamshela igalelo le-analog ye-thermistor.
2. Qhagamshela imodyuli kuthungelwano lwe-RS-485 usebenzisa iDATA+ kunye neDATA- iitheminali. Ukuba umamkeli uxhotyiswe kuphela nge-RS-232 interface, ngoko ke i-RS-232 ukuya kwi-RS-485 converter iya kufuneka.
3. Qhagamshela imodyuli kunikezelo lwamandla usebenzisa i-+Vs kunye neetheminali ze-GND. Qaphela ukuba umqulutage enikiweyo kufuneka ibe kuluhlu lwe +10 ukuya +30V DC.
   
4. Vula i-DCON eluncedo.
   1. Cofa kwi COM port(icon yokuqala)
   2. Iyakwazi ukukhetha iindlela ezininzi ezifana neBaud Rate, Protocol, Checksum, kunye neFomathi ukukhangela imodyuli. Izicwangciso ezingagqibekanga zomnqongo zingafunyanwa kwiCandelo 3. Cofa u-Kulungile emva kokukhetha i-COM port setting.
   
5. DCON utility pro iyakukhangela i-COM port ekhethiweyo ngokoseto olusetiwe ngaphambili. I-DCON Utility Pro ixhasa i-DCON kunye ne-Modbus protocol kuzo zonke i-ICPDAS kunye nezinye iimodyuli.
   
6. Kwiimodyuli ze-M-7000 usebenzisa i-modbus RTU protocol, qwalasela imodyuli usebenzisa le misebenzi ilandelayo.
   Umsetyenzana we-04h we-Function 46h, jonga incwadi yomsebenzisi iCandelo 3.3.2
   Umsetyenzana we-06h we-Function 46h, jonga incwadi yomsebenzisi iCandelo 3.3.4
   Umsetyenzana we-08h we-Function 46h, jonga incwadi yomsebenzisi iCandelo 3.3.6
   Kwiimodyuli ze-M-7000 usebenzisa i-protocol ye-Modbus RTU, sebenzisa i-Function 04h ukufunda idatha evela kumajelo angenayo. Jonga incwadi yomsebenzisi iCandelo 3.2 ngeenkcukacha.
   
7. Ukuba umsebenzisi akawazi umyalelo, umsebenzisi unokukhetha idilesi kunye ne-ID, iya kubonisa eminye imiyalelo engezantsi. Abasebenzisi banokukhetha imiyalelo eyimfuneko yokuvavanya okanye ukulungisa iimodyuli.
   

Amaxwebhu / Izibonelelo

I-Logicbus M-7017C isitishi esisi-8 semodyuli yokuFumana idatha yangoku [pdf] Isikhokelo somsebenzisi I-M-7017C 8-ijelo leModyuli yokuFumana iNgcaciso yeNgcaciso yangoku, i-M-7017C, i-8-channel yeModyuli yokuFumana iNgcaciso yeNgcaciso yangoku, iModyuli yangoku yokuFumana iDatha, iModyuli yokuFumana iNgeniso, iModyuli yokuFumana idatha, iModyuli yokuFumana, iModyuli

Iimbekiselo

• Incwadi yokusebenzisa