HIKVISION Configure Automation Device hauv AX PRO Wireless Control Vaj Huam Sib Luag Cov Lus Qhia
Kev npaj
- DS-PWA Series AX PRO Wireless Security Control Vaj Huam Sib Luag
- Automation Device (Relay Module) DS-PM1-O1L-WE thiab Wireless Keyfob
- IE Browser thiab Hik-Connect App
Yuav ua li cas rau Configure Automation Device hauv AX PRO Wireless Control Vaj Huam Sib Luag
Siv hom xwm txheej los tswj Automation Device
- Ntxiv cov Automation Device rau AX PRO thaum xub thawj
- Nkag mus rau AX PRO, xaiv Ntaus-Automation-Configuration
- Configure Original Status—Ob txwm qhib los yog kaw li qub
- Configure Tamper Input: Yog tias qhov thib peb ntaus ntawv Tamper teeb liab txuas nrog, koj tuaj yeem ua haujlwm no. Xav tau xaiv Tamper input Status (NO lossis NC)
- Configure Event linkage
Nco tseg: THIAB hom txhais tau tias tsuas yog tag nrho cov cheeb tsam triggered, ces relay yuav tso zis
Teem caij: Configured lub sij hawm, lub Automation Device yuav qhib li qub los yog ib txwm kaw
Disarm: Disarm Event yuav txuas lub Automation Device qhib lossis kaw
Silence tswb: Silence Alarm Event yuav txuas lub Automation Device qhib lossis kaw
txhaum: Qhov System Fault Event yuav txuas lub Automation Device qhib lossis kaw
Los Ntawm Txhais Tes: Koj tuaj yeem tswj hwm lub Automation Device qhib lossis kaw hauv Hik txuas
Siv Keyfob los tswj Automation Device
- Ntxiv cov Automation Device thiab wireless keyfob rau AX PRO thaum xub thawj
- Configure Keyfob Button linkage to Automation Control, thiab xaiv tus lej relay.
- Configure Automation Control Device Event Type—Manual, xaiv Activation Mode and Pulse Duration.
Qhib hom
Pulse: Relay tso zis rau lub sijhawm luv luv thiab tom qab ntawd nres
Latch: Relay tso zis tsis tu ncua
Cov ntaub ntawv / Cov ntaub ntawv
 |
HIKVISION Configure Automation Device hauv AX PRO Wireless Control Vaj Huam Sib Luag [ua pdf] Cov lus qhia HIKVISION, DS-PWA Series, Configure, Automation, Ntaus, hauv, AX PRO, Wireless, Control, Vaj Huam Sib Luag |
