Cov ntsiab lus zais
1 Danfoss GP Programmers thiab Lub Sijhawm Hloov
2 Specifications
3 Cov lus qhia installation
4 Cov lus qhia siv
5 FAQs
6 Cov ntaub ntawv / Cov ntaub ntawv
6.1 Cov ntaub ntawv

Danfoss-lub logo

Danfoss GP Programmers thiab Lub Sijhawm Hloov

Danfoss-GP-Programmers-and-Time-Switches-product

Cov khoom no ua raws li cov lus qhia hauv qab no EC:

  • Electro-Magnetic Compatibility Cov Lus Qhia.
    • (EMC) (2004/108/EC)
  • Tsawg Voltage Qhia.
    • (LVD) (2006/95/EC)

Specifications

  • Fais fab mov: 220/240Vac, 50/Hz
  • Hloov Ua Haujlwm: 1 x SPST, Hom 1B
  • Hloov kev ntsuas: 220/240Vac, 50/60Hz, 6 (2)A
  • Lub sij hawm raug
  • Kev ntsuas qhov ntsuas: IP20
  • Qhov xwm txheej muaj kuab paug: Qib 2
  • Tsim kom tau raws li BS EN60730-2-7
  • Dimensions: 112mm dav, 135mm siab, 69mm tob
  • Rated Impulse Voltage: 2.5 kwv
  • Max. Ambient Temp. Kub: 55 ° C
  • Pob Kev Ntsuas Kub: 75 ° C

Chav tsev yuav tsum tau nruab los ntawm tus kws tshaj lij hluav taws xob, thiab kev teeb tsa yuav tsum ua raws li IEE Cov Cai. Chav tsev no yuav tsum tau xaim los ntawm kev sib txuas tag nrho los ntawm BS EN60730-1, piv txwv li, ntawm lub ntsaws thiab tsis hloov lub qhov (socket) lossis ob lub ncej hloov qhov hluav taws xob nrog neon.

Cov lus qhia installation

  1. Loosen lub fin xing ntsia hlau nyob rau hauv lub hauv paus ntawm chav tsev kom tso lub grey yas Wiring Cover. Xyuas kom cov ntaub nplaum tiv thaiv ntawm tus ntiv tes xoo log tseem nyob hauv qhov chaw.
  2. Tuav lub uniclock facece downwards, prefirmlymly nyob rau hauv nruab nrab ntawm lub phab ntsa thiab xaub los ntawm lub module raws li qhia.
  3. Txhim kho Wallplate/Terminal Block rau phab ntsa nrog countersunk No.8 woodscrews los yog rau lub thawv steel rau BS 4662. 1970 los yog ib tug nto mounting steel los yog molded lub thawv uas muaj cov chaw ntawm 23/8 "(60.3mm).
  4. Xa mus rau Wiring Diagrams overleaf, txuas lub tsev raws li qhia. Xyuas kom meej tias terminals 3 thiab 6 yog txuas rau qhov xav tau (Mains Voltage daim ntaub ntawv) nrog insulated cable muaj peev xwm nqa tag nrho load tam sim no.
  5. Xyuas kom meej tias tag nrho cov plua plav thiab cov khib nyiab tau raug tshem tawm ntawm thaj chaw, tom qab ntawd ntsaws lub modulfirmlyly rau hauv phab ntsa, xyuas kom meej tias tus nuv nyob rau sab saum toj ntawm phab ntsa txuas nrog lub qhov nyob tom qab ntawm lub cev. Nias lub module kom txog thaum nws nyob ruaj khov.
  6. Txiav ib kab aperture nyob rau hauv Cov Hlau Npog yog tsim nyog; hloov lub Hlau Npog, thiab nruj nreem ntsia hlau fin xing.
  7. Hloov lwm qhov n Mains thiab sim ua haujlwm kom raug raws li hauv qab no:
    • i) Tshem tawm daim kab xev tiv thaiv los ntawm lub log ua ntej xaiv.
    • ii) Tshem lub hau npog thiab tig lub moos hu ob lub kiv puag ncig kom tshem tawm cov txheej txheem.
    • ii) Txheeb xyuas tias txhua txoj haujlwm ntawm Kev Xaiv Hloov thiab Tappets ua haujlwm raug. (Saib cov lus qhia hauv Phau Ntawv Qhia Tus Neeg Siv.)
  8. Hloov lub dial cover. Thaum kawg, kuv tau txais cov lus qhia USERS nrog rau Tsev Neeg.
  9. Yog hais tias chav tsev yuav tsum tau muab tso rau sab laug thiab nyob rau hauv ib qho chaw muaj plua plav, tiv thaiv lub pre-selector log los ntawm re-affi xing daim kab xev tiv thaiv.

TSEEM CEEB: Tshem daim kab xev ua ntej muab chav ua haujlwm.

Danfoss-GP-Programmers-and-Time-Switches-fig- (1)

Cov lus qhia siv

  1. Tshem tawm daim kab xev tiv thaiv los ntawm lub pre-xaiv lub log ua ntej siv.
  2. Tig lub moos hu ob lub kiv puag ncig kom tshem tawm lub tshuab ua ntej teeb tsa lub sijhawm.
  3. Txheeb xyuas tias txhua txoj haujlwm ntawm Xaiv Hloov Hloov thiab Tappets ua haujlwm raug.

INTERNAL WIRING MODEL 102

Danfoss-GP-Programmers-and-Time-Switches-fig- (2)

CEEB TOOM: Terminals 3 thiab 6 yuav tsum tau txuas sab nraud (tshwj tsis yog thaum voltage-dawb hloov hu yuav tsum tau).

TSEEM CEEB NTAWM EXTERNAL CIRCUITS

Danfoss-GP-Programmers-and-Time-Switches-fig- (3)

  1. Cov pa hluav taws xob hauv tsev lossis cov roj hluav taws xob liab nrog lub ntiajteb txawj nqus dej kub thiab cov cua kub twj tso kua mis. (Yog tias tsis tas yuav tsum muaj chav ntsuas, xaim twj tso kua mis L ncaj qha mus rau lub davhlau ya nyob twg 2 ntawm 102).
  2. Pumped system nrog lub tog raj kheej stat nyob rau hauv HW Circuit Court thiab chav stat thiab 2 chaw nres nkoj caij nplooj ntoos hlav rov qab cheeb tsam valve nyob rau hauv cua sov Circuit Court.

INTERNAL WIRING MODEL 106

Danfoss-GP-Programmers-and-Time-Switches-fig- (4)

Pumped system nrog 3 chaw nres nkoj (2 txoj kev) diverter valve.

INTERNAL WIRING MODEL 103

Danfoss-GP-Programmers-and-Time-Switches-fig- (5)

CEEB TOOM: Terminals 3 thiab 6 yuav tsum (feem ntau) txuas nrog sab nraud. Tshwj xeeb yog thaum tswj circuits ua haujlwm ntawm qis voltage (piv txwv li 24 volts) lossis rau qee yam kev sib xyaw ua ke Boilers (saib Phau Ntawv Qhia Cov Khoom Siv Boiler).

TSEEM CEEB NTAWM EXTERNAL CIRCUITS

  1. Kev tswj cov cua sov ua haujlwm nkaus xwb (Mains Voltage)
    Nco tseg: Yog tias chav ntsuas kub tsis tas yuav tsum tau, koom nrog timeswitch terminals 1 thiab 2 nrog qhov txuas uas tsim nyog rau kev thauj khoom tam sim no.
  2. Tswj Kev Txom Nyem Voltage Systems (piv txwv li, cua sov cua sov li qub, qis voltage burners)
  3. Cov pa roj los yog roj hluav taws kub cua sov nrog lub ntiajteb txawj nqus dej kub thawj thiab twj tso kua mis cua sov.
  4. Kev tswj cov cua sov thaum siv nrog cov hom boilers.

103 Terminals UAS

Danfoss-GP-Programmers-and-Time-Switches-fig- (6)Danfoss-GP-Programmers-and-Time-Switches-fig- (7) Danfoss-GP-Programmers-thiab-Time-Switches-fig- (7)

CEEB TOOM: Kev yooj yim ntawm kev teeb tsa tuaj yeem ua tiav los ntawm kev siv Danfoss Randall Wiring Center, uas tau txais los ntawm cov neeg tsim khoom lag luam thiab cov xa khoom feem ntau. YOG HAIS TIAS YUAV TSUM TAU TXAIS KEV KHO MOB, ua raws li cov lus qhia kev teeb tsa nrog rau chav tsev thiab tsis yog cov kab hluav taws xob muaj nyob rau ntawm nplooj ntawv no.

Danfoss Randall tuaj yeem lees txais tsis muaj lub luag haujlwm rau qhov ua yuam kev hauv phau ntawv teev npe, daim ntawv qhia, thiab lwm yam khoom luam tawm. Danfoss Randall tseg txoj cai los hloov nws cov khoom yam tsis muaj ntawv ceeb toom. Qhov no kuj tseem siv tau rau cov khoom lag luam uas twb tau txiav txim lawm, yog tias qhov kev hloov pauv no tuaj yeem ua yam tsis muaj kev hloov pauv tom qab tsim nyog hauv cov lus qhia tshwj xeeb uas twb tau pom zoo lawm.

FAQs

Q: Kuv puas tuaj yeem nruab cov khoom no yam tsis muaj kev pabcuam?
A: Tsis yog, chav tsev yuav tsum tau teeb tsa los ntawm tus kws tshaj lij hluav taws xob kom muaj kev nyab xeeb thiab ua raws li cov cai.

Q: Kuv yuav ua li cas yog tias lub tshuab ua haujlwm tsis raug?
A: Tshawb xyuas cov kev sib txuas ntawm cov kab txuas thiab xyuas kom meej tias tag nrho cov kauj ruam hauv kev teeb tsa thiab kev siv cov lus qhia tau ua raws nraim. Yog tias muaj teeb meem tshwm sim, hu rau cov neeg siv khoom txhawb nqa.

Cov ntaub ntawv / Cov ntaub ntawv

Danfoss GP Programmers thiab Lub Sijhawm Hloov [ua pdf] Daim ntawv qhia kev teeb tsa
102, 103, 106, GP Programmers thiab Sijhawm Hloov, GP, Programmers thiab Sijhawm Hloov, thiab Lub Sijhawm Hloov, Lub Sijhawm Hloov

Cov ntaub ntawv

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *