Autonics TCN4 SERIES Dual Indicator Temperature Controller

Cov ntaub ntawv khoom

Lub Autonics Dual Indicator Temperature Controller yog ib feem ntawm TCN4 Series thiab yog tus kov-switch settable, dual-display hom maub los. Nws muaj peev xwm tswj tau thiab saib xyuas qhov kub thiab txias nrog qhov tseeb zoo.

Nta

• Dual zaub kom yooj yim ntsuas kub.
• Kov qhov hloov chaw rau kev teeb tsa yooj yim.
• Relay hu thiab Solid State Relay (SSR) tso zis hom muaj.
• Ntau lub tswb tso tawm kom muaj kev nyab xeeb.
• Muaj nyob rau hauv ntau yam kev xaiv fais fab.
• Compact loj rau kev yooj yim installation.

Khoom Specifications

• Txoj kev xaim: Bolt (tsis muaj cim)
• Tswj cov zis: Relay Hu + SSR Drive tso zis
• Lub hwj chim: 24VAC 50/60Hz, 24-48VDC los yog 100-240VAC 50/60Hz
• Tswb Outputs: 2 (Alarm1 + Alarm2)
• Tus lej teeb tsa hom: 4 (9999 - 4 tus lej)
• Zaub hom: Dual
• Yam khoom: Temperature Controller
• Loj: S (me), M (Medium), H (siab), L (Low)

Cov lus qhia siv khoom

1. Ua ntej siv Autonics Dual Indicator Temperature Controller, nyeem cov kev xav txog kev nyab xeeb uas tau hais hauv phau ntawv qhia ua tib zoo.
2. Nruab tus maub los rau ntawm lub vaj huam sib luag los xyuas kom muaj kev nyab xeeb thiab tsis txhob muaj hluav taws xob poob lossis hluav taws kub.
3. Xyuas kom meej tias lub hwj chim qhov hluav taws xob raug txiav ua ntej txuas, kho, lossis tshuaj xyuas lub tsev. Tsis ua li ntawd yuav ua rau muaj hluav taws xob poob lossis hluav taws kub.
4. Xyuas 'Kev Sib Txuas' ua ntej xaim kom tsis txhob muaj teeb meem, uas yuav ua rau muaj hluav taws kub.
5. Siv AWG 20 (0.50mm2) los yog thicker cable thaum txuas lub powerinput thiab relay tso zis. Siv AWG 28 ~ 16 cable thiab ceev lub davhlau ya nyob twg ntsia hlau nrog ib tug nruj torque ntawm 0.74 ~ 0.90Nm thaum txuas lub sensor input thiab kev sib txuas lus cable. Kev ua tsis tiav yuav ua rau muaj hluav taws kub lossis ua haujlwm tsis zoo vim kev sib cuag tsis ua haujlwm.
6. Siv Autonics Dual Indicator Temperature Controller nyob rau hauv cov lus qhia tshwj xeeb kom tsis txhob muaj hluav taws kub lossis khoom puas tsuaj.
7. Siv daim ntaub qhuav los ntxuav chav tsev; Tsis txhob siv dej los yog cov kuab tshuaj organic. Tsis ua li ntawd yuav ua rau muaj hluav taws xob poob lossis hluav taws kub.
8. Tsis txhob siv lub tsev nyob rau hauv qhov chaw uas muaj hluav taws kub / tawg / corrosive gas, av noo, ncaj qha tshav ntuj, radiant tshav kub, vibration, cuam tshuam, los yog salinity tej zaum yuav tshwm sim. Tsis ua li ntawd yuav ua rau muaj hluav taws kub lossis tawg.
9. Khaws cov chips hlau, plua plav, thiab cov xaim residue ntawm ntws mus rau hauv chav tsev kom tsis txhob muaj hluav taws kub lossis khoom puas tsuaj.
10. Xa mus rau cov ntaub ntawv xaj uas tau hais hauv phau ntawv qhia ua ntej xaj Autonics Dual Indicator Temperature Controller.

Kev xav txog kev nyab xeeb

• Thov saib xyuas txhua qhov kev xav txog kev nyab xeeb rau kev nyab xeeb thiab tsim khoom lag luam kom zam kev phom sij.
• Kev xav txog kev nyab xeeb raug cais raws li hauv qab no.
  • Ceeb Toom Tsis ua raws li cov lus qhia no yuav ua rau raug mob hnyav lossis tuag taus.
  • Ceeb Toom Tsis ua raws li cov lus qhia no yuav ua rau tus kheej raug mob lossis cov khoom puas tsuaj.
• Cov cim siv rau ntawm cov khoom thiab phau ntawv qhia yog cov cim hauv qab no sawv cev rau kev ceev faj vim muaj xwm txheej tshwj xeeb uas yuav muaj kev phom sij.

Ceeb toom

1. Ib lub cuab yeej tsis muaj kev nyab xeeb yuav tsum tau teeb tsa thaum siv chav tsev nrog cov tshuab uas yuav ua rau raug mob hnyav lossis poob nyiaj txiag ntau. (xws li nuclear fais fab tswj, khoom siv kho mob, nkoj, tsheb, railways, aircraft, combustion apparatus, kev nyab xeeb khoom, kev ua txhaum cai / kev tiv thaiv kev puas tsuaj, thiab lwm yam.)
   Tsis ua raws li cov lus qhia no yuav ua rau hluav taws kub nyhiab, raug mob ntawm tus kheej, lossis kev poob nyiaj txiag.
2. Nruab rau ntawm lub vaj huam sib luag ntaus ntawv siv. Tsis ua raws li cov lus qhia no yuav ua rau hluav taws xob poob lossis hluav taws.
3. Tsis txhob txuas, kho, lossis tshuaj xyuas lub tsev thaum txuas nrog lub hwj chim. Kev ua tsis raws cov lus qhia no yuav ua rau hluav taws xob lossis hluav taws kub.
4. Kos 'Connections' ua ntej thaiv. Kev ua tsis raws cov lus qhia no yuav ua rau hluav taws kub.
5. Tsis txhob disassemble lossis hloov kho chav nyob. Kev ua tsis raws cov lus qhia no yuav ua rau hluav taws xob lossis hluav taws kub.

Ceev faj

1. Thaum txuas lub hwj chim input thiab relay tso zis, siv AWG 20 (0.50mm2) cable los yog tshaj thiab ceev lub davhlau ya nyob twg ntsia hlau nrog ib tug nruj torque ntawm 0.74 ~ 0.90Nm Thaum txuas lub sensor input thiab kev sib txuas lus cable tsis muaj nplooj siab cable, siv AWG 28 ~ 16 cable thiab ceev lub davhlau ya nyob twg ntsia hlau nrog ib tug nruj torque ntawm 0.74 ~ 0.90Nm Tsis ua raws li cov lus qhia no tej zaum yuav ua rau hluav taws kub los yog malfunction vim kev sib cuag tsis ua hauj lwm.
2. Siv cov chav nyob hauv cov kev ntsuas ntsuas. Tsis ua raws li cov lus qhia no yuav ua rau hluav taws kub lossis khoom puas tsuaj. 3. Siv daim ntaub qhuav los ntxuav chav tsev, thiab tsis txhob siv dej los yog cov kuab tshuaj organic. Tsis ua raws li cov lus qhia no yuav ua rau hluav taws xob poob lossis hluav taws.
3. Tsis txhob siv chav nyob hauv qhov chaw uas muaj cov nplaim hluav taws/tawg/xeb roj, av noo, tshav ntuj ncaj qha, tshav ntuj nrig, muaj cua sov, muaj kev cuam tshuam, lossis muaj qab ntsev. Kev ua tsis raws cov lus qhia no yuav ua rau hluav taws lossis tawg.
4. Khaws hlau nti, plua plav, thiab xaim seem los ntawm qhov ntws mus rau hauv chav tsev. Kev ua tsis raws cov lus qhia no yuav ua rau hluav taws lossis cov khoom puas.

Ordering Information

1. Tsuas yog rau tus qauv TCN4S.
2. Nyob rau hauv cov ntaub ntawv ntawm AC voltage qauv, SSR tsav tso zis txoj kev (tus qauv ON / OFF tswj, voj voog tswj, theem tswj) muaj rau xaiv.
   • Cov lus qhia saum toj no yuav raug hloov pauv thiab qee cov qauv yuav raug txiav tawm yam tsis tau ceeb toom.
   • Nco ntsoov ua raws cov lus ceeb toom sau hauv phau ntawv qhia thiab cov lus piav qhia txuj ci (catalog, homepage).

Specification

1. Ntawm chav tsev kub (23ºC ± 5ºC)
   • Hauv qab 200ºC ntawm thermocouple R (PR), S (PR) yog (PV ± 0.5% lossis ± 3ºC, xaiv qhov siab dua) ± 1 tus lej
   • Tshaj 200ºC ntawm thermocouple R (PR), S (PR) yog (PV ± 0.5% lossis ± 2ºC, xaiv qhov siab dua) ± 1 tus lej - Thermocouple L (IC), RTD Cu50Ω yog ​​(PV ± 0.5% lossis ± 2ºC, xaiv qhov siab dua) ± 1 tus lej Tawm ntawm chav tsev kub ntau
   • Hauv qab 200ºC ntawm thermocouple R (PR), S (PR) yog (PV ± 1.0% lossis ± 6ºC, xaiv qhov siab dua) ± 1 tus lej
   • Tshaj 200ºC ntawm thermocouple R (PR), S (PR) yog (PV ± 0.5% lossis ± 5ºC, xaiv qhov siab dua) ± 1 tus lej - Thermocouple L (IC), RTD Cu50Ω yog ​​(PV ± 0.5% lossis
   • ± 3ºC, xaiv qhov siab dua) ± 1 tus lej Rau TCN4S- -P, ntxiv ± 1 ℃ los ntawm tus qauv raug. 2: Qhov hnyav suav nrog kev ntim khoom. Qhov hnyav hauv kab lus tsuas yog rau chav tsev xwb. Kev tiv thaiv ib puag ncig yog ntsuas ntawm tsis muaj khov lossis condensation.

Unit Description

1. Tam sim no kub (PV) zaub (Liab)
   1. RUN hom: tam sim no kub (PV) zaub
   2. Parameter teeb hom: Parameter zaub
2. Teem kub (SV) zaub (ntsuab)
   1. RUN hom: Teem kub (SV) zaub
   2. Parameter teeb hom: Parameter teeb tsa tus nqi zaub
3. Control/Alarm tso zis qhia
   1. OUT: Nws tig ON thaum cov zis tswj tau ON. Thaum lub sij hawm SSR tsav tso zis hom hauv CYCLE / PHASE tswj, qhov ntsuas no tig ON thaum MV yog tshaj 3.0%. 2) AL1 / AL2: Nws tig ON thaum lub tswb tso tawm ON.
4. Nws pib tuning qhov taw qhia AT qhov taw qhia flashes los ntawm txhua 1 sec thaum lub sijhawm ua haujlwm nws pib-tuning.
5. tus yuam sij Siv thaum nkag mus rau hauv pawg parameter, rov qab mus rau RUN hom, txav tsis tau, thiab txuag cov nqi.
6. Kev kho
   Siv thaum nkag mus rau hauv kev hloov pauv tus nqi, tus lej txav thiab tus lej nce / nqis.
7. Digital input key
   Nias cov yuam sij rau 3 sec. kom khiav lub teeb muaj nuj nqi (RUN/STOP, tswb tso zis pib dua, nws pib tuning) nyob rau hauv digital input key [].
8. Qhov ntsuas kub ntsuas (ºC/℉)
   Nws qhia qhov ntsuas kub tam sim no.

Input Sensor thiab Temperature Range

Qhov ntev

Kev sib txuas

Parameter Pawg

Tag nrho cov Parameter

• Xovxwm tseem ceeb tshaj 3 sec hauv ib pawg parameter, nws txuag cov nqi teev thiab rov qab mus rau RUN hom. (Kev zam: Xovxwm yuam sij ib zaug hauv SV teeb tsa pawg, nws rov qab mus rau RUN hom).
• Yog tias tsis muaj tus yuam sij nkag rau 30 sec., nws rov qab mus rau RUN hom tau txais thiab cov nqi ntawm qhov ntsuas tsis raug cawm.
• Xovxwm tseem ceeb dua hauv 1 sec. Tom qab rov qab mus rau RUN hom, nws nce qib ntawm thawj parameter ntawm pawg parameter yav dhau los.
• Xovxwm yuam kom txav mus rau qhov parameter tom ntej.
• Parameter cim nyob rau hauv tej zaum yuav tsis tshwm sim nyob ntawm lwm qhov chaw parameter. Teem parameter li 'Parameter 2 pab pawg → Parameter 1 pawg → Teem pab pawg ntawm cov nqi teeb tsa' kev txiav txim txiav txim siab txog qhov cuam tshuam ntawm txhua pawg teeb tsa.
• 1: Nws tsis tso tawm rau AC / DC fais fab qauv (TCN4 -22R).
• key: Tsiv parameter thiab txuag lub teeb , key: Tsiv tus lej, or key: Hloov cov txheej txheem

Parameter 2 pawg

SV chaw
Koj tuaj yeem tsim qhov kub thiab txias los tswj nrog ,,, yuam sij. Qhov chaw teeb tsa yog nyob rau hauv SV qis tus nqi [L-SV] rau SV siab dua tus nqi [H-SV].
Piv txwv li) Thaum hloov qhov kub ntawm 210ºC txog 250ºC

Rov pib dua Parameter
Pib dua tag nrho cov tsis ua raws li lub Hoobkas. Tuav lub hauv ntej + + cov yuam sij rau 5 sec., kom nkag mus rau qhov ntsuas rov pib dua [INIT] parameter. Xaiv 'YES' thiab tag nrho cov tsis tau pib dua li lub Hoobkas ua ntej. Xaiv 'Tsis yog' thiab cov chaw yav dhau los raug tswj xyuas. Yog tias teeb tsa qhov ntsuas ntsuas ntsuas [LOC] lossis ua tiav nws pib-tuning, parameter rov pib dua yog tsis muaj.

Muaj nuj nqi

Nws pib tuning [AT]
Nws pib tuning ntsuas qhov kev tswj hwm tus yam ntxwv thermal thiab thermal teb tus nqi, thiab tom qab ntawd txiav txim siab qhov tsim nyog PID lub sij hawm tas li. (Thaum tswj hom [C-MD] yog teem li PID, nws yog tso tawm kom pom.) Daim ntawv thov ntawm lub sij hawm PID tas li paub cov lus teb ceev thiab siab precision kub tswj. Yog hais tias yuam kev [OPEN] tshwm sim thaum nws pib-tuning, nws nres qhov kev ua haujlwm no cia li. Txhawm rau nres nws pib tuning, hloov lub teeb ua [OFF]. (Nws tuav P, I, D qhov tseem ceeb ua ntej nws pib kho.)

Hysteresis [HYS]
Nyob rau hauv rooj plaub ntawm ON / OFF tswj, teem nruab nrab ntawm ON thiab OFF lub sij hawm raws li hysteresis. (Thaum tswj hom [C-MD] raug teeb tsa raws li ONOF, nws tau tshwm sim.) Yog tias hysteresis me dhau, nws yuav ua rau muaj kev tswj xyuas cov khoom tua tsiaj (takeoff, chattering) los ntawm cov suab nrov sab nraud, thiab lwm yam.

SSR tsav tso zis xaiv (SSRP muaj nuj nqi) [SSrM]

• SSRP kev ua haujlwm yog xaiv tau ib qho ntawm tus qauv ON/OFF tswj, tswj lub voj voog, tswj theem los ntawm kev siv tus qauv SSR tsav tawm.
• Realizing siab raug thiab raug nqi kub tswj raws li cov zis tawm (lub voj voog tswj thiab tswj theem).
• Xaiv ib qho ntawm tus qauv ON / OFF tswj [STND], kev tswj lub voj voog [CYCL], theem tswj [PHAS] ntawm [SSrM] parameter ntawm parameter 2 pawg. Rau kev tswj lub voj voog, txuas xoom hla tig-on SSR lossis random tig-on SSR. Rau theem tswj, txuas random tig-on SSR.

Kub tswj

• Thaum xaiv theem lossis lub voj voog tswj hom, lub hwj huam mov rau kev thauj khoom thiab ntsuas kub yuav tsum zoo ib yam.
• Nyob rau hauv rooj plaub uas xaiv PID tswj hom thiab theem [PHAS] / voj voog [PHAS] tswj cov zis hom, tswj lub voj voog [T] tsis tso cai.
• Rau AC / DC fais fab qauv (TCN -22R), qhov ntsuas no tsis tshwm sim thiab nws tsuas yog muaj kev tswj hwm tus qauv los ntawm relay lossis SSR.

1. Standard ON/OFF tswj hom [STND] Ib hom los tswj lub load tib yam li Relay tso zis hom. (ON: tso zis theem 100%, OFF: tso zis theem 0%)
2. Lub voj voog tswj hom [CYCL]
   Ib hom los tswj cov load los ntawm kev rov qab tso zis ON / OFF raws li tus nqi ntawm cov zis nyob rau hauv lub voj voog teeb tsa. Tau txhim kho ON / OFF lub suab nrov los ntawm Zero Cross hom.
3. Phase tswj hom [PHAS]
   Ib hom los tswj cov load los ntawm kev tswj cov theem hauv AC ib nrab voj voog. Serial tswj yog muaj. RANDOM Tig-on hom SSR yuav tsum tau siv rau hom no.

Digital input key ( 3 sec.) []

Tswb

Teem ob lub tswb ua haujlwm thiab lub tswb xaiv los ntawm kev sib txuas. Alarm outputs yog ob thiab txhua tus ua haujlwm ib leeg. Thaum lub ntsuas kub tam sim no tawm ntawm lub tswb ntau, lub tswb yuav raug tshem tawm. Yog hais tias lub tswb xaiv yog tswb latch los yog tswb latch thiab standby ib ntus 1/2, nias lub tswv yim digital ( 3 sec., digital input key[] ntawm parameter 2 pawg teeb tsa raws li AlRE), lossis tua lub zog thiab tig ON kom tshem lub tswb.

Cov sijhawm ua haujlwm tswb

• H: Tswb tso zis hysteresis [AHYS]

Kev xaiv tswb

• Cov xwm txheej ntawm kev rov qab siv cov khoom sib txuas rau kev sib txuas ua ke 1, lub tswb ntsuas thiab cov khoom sib txuas 1: Lub Hwj Chim ON Cov xwm txheej ntawm kev rov qab siv cov khoom sib txuas rau cov kab ke standby 2, lub tswb ntsuas thiab cov khoom sib txuas 2: Fais fab ON, hloov qhov kub thiab txias, tswb ntsuas kub ( AL1, AL2) lossis lub tswb ua haujlwm (AL-1, AL-2), hloov STOP hom rau RUN hom.

Sensor break alarm Qhov muaj nuj nqi uas lub tswb tso tawm yuav ON thaum sensor tsis txuas los yog thaum sensor lub disconnection yog pom thaum lub sij hawm tswj kub. Koj tuaj yeem tshawb xyuas seb lub sensor puas txuas nrog lub buzzer lossis lwm chav nyob uas siv lub tswb nrov tiv tauj. Nws yog xaiv tau ntawm tus qauv tswb [SBaA] lossis tswb latch [5BaB].

Loop break tswb (LBA)
Nws kuaj xyuas lub voj voog thiab tso tawm lub tswb los ntawm qhov ntsuas kub ntawm qhov kev kawm. Kev tswj cua sov (txias tswj), thaum tswj cov zis MV yog 100% (0% rau kev tswj cua txias) thiab PV tsis nce ntau dua li LBA nrhiav band [] thaum lub sij hawm saib xyuas LBA [[] thaum lub sij hawm saib xyuas LBA [], tswb tso zis tig ON.

• Thaum ua tiav nws pib-tuning, LBA nrhiav band [LBaB] thiab LBA lub sijhawm saib xyuas tau txiav txim siab raws li tus nqi pib kho. Thaum lub tswb ua haujlwm hom [AL-1, AL-2] raug teeb tsa ua lub voj tawg tswb (LBA) [LBa], LBA nrhiav band [LBaB] thiab LBA saib xyuas lub sijhawm [] parameter yog tso tawm.

Phau ntawv rov pib dua []

• Phau ntawv rov pib dua [] los ntawm kev tswj xyuas

Thaum xaiv P / PD tswj hom, qee qhov kub sib txawv tshwm sim txawm tias tom qab PV mus txog qhov xwm txheej ruaj khov vim tias lub tshuab cua sov nce thiab poob lub sij hawm tsis sib haum vim yog thermal yam ntxwv ntawm cov khoom tswj, xws li tshav kub muaj peev xwm, lub peev xwm ntawm lub rhaub. Qhov kub sib txawv no hu ua offset thiab phau ntawv rov pib dua [] muaj nuj nqi yog teem/kho offset. Thaum PV thiab SV sib npaug, rov pib dua tus nqi yog 50.0%. Tom qab tswj tau ruaj khov, PV qis dua SV, rov pib dua tus nqi dua 50.0% lossis PV siab dua SV, rov pib dua tus nqi qis dua 50.0%.

Kev kho cov tswv yim [IN-B]
Tus maub los nws tus kheej tsis muaj qhov yuam kev tab sis yuav muaj qhov yuam kev los ntawm sab nraud input kub sensor. Txoj haujlwm no yog kho qhov yuam kev no. Piv txwv li) Yog tias qhov ntsuas kub tiag tiag yog 80ºC tab sis tus maub los qhia 78ºC, teeb tsa cov tswv yim kho tus nqi [IN-B] li '002' thiab cov maub los qhia 80ºC. Raws li qhov tshwm sim ntawm kev kho cov tswv yim, yog tias qhov ntsuas kub tam sim no (PV) tshaj txhua qhov ntsuas kub ntawm cov khoom siv hluav taws xob, nws qhia 'HHHH' lossis 'LLLL'.

Input digital filter[]
Yog tias qhov ntsuas kub tam sim no (PV) hloov pauv ntau zaus los ntawm kev hloov pauv sai ntawm lub teeb liab, nws cuam tshuam rau MV thiab kev tswj hwm ruaj khov yog tsis yooj yim sua. Yog li ntawd, cov lim dej ua haujlwm ruaj khov tus nqi kub tam sim no. Rau example, teeb tsa cov tswv yim digital lim tus nqi raws li 0.4 sec, thiab nws siv cov lim dej rau cov khoom siv hauv lub sijhawm 0.4 sec thiab qhia cov txiaj ntsig no. Qhov ntsuas kub tam sim no tuaj yeem sib txawv los ntawm cov khoom siv tiag tiag.

yuam kev

Zaub	Kev piav qhia	Kev daws teeb meem
Qhib	Flashes yog hais tias input sensor yog disconnected los yog sensor tsis txuas.	Kos lub xeev input sensor.
Hhhh	Flashes yog ntsuas sensor input siab tshaj qhov kub thiab txias.	Thaum cov tswv yim nyob rau hauv qhov ntsuas kub ntau, cov zaub no ploj mus.
Llll	Flashes yog mesured sensor input qis dua qhov kub thiab txias

Factory Default

Kev teeb tsa

• Ntxig cov khoom rau hauv ib lub vaj huam sib luag, fasten bracket los ntawm kev thawb nrog cov cuab yeej raws li qhia saum toj no.

Ceev faj thaum siv

1. Ua raws li cov lus qhia hauv 'Kev Ceeb Toom Thaum Siv'. Txwv tsis pub, Nws tuaj yeem ua rau muaj xwm txheej tsis txaus ntseeg.
2. Txheeb xyuas qhov polarity ntawm cov terminals ua ntej xaim qhov ntsuas kub. Rau RTD kub sensor, xaim nws li 3-xaim hom, siv cables tib lub thickness thiab ntev. Rau cov thermocouple (CT) qhov kub thiab txias sensor, siv cov xaim them nyiaj rau kev txuas ntxiv.
3. Cia deb ntawm siab voltage kab lossis kab hluav taws xob los tiv thaiv lub suab nrov inductive. Nyob rau hauv rooj plaub ntawm kev txhim kho cov kab hluav taws xob thiab cov kab hluav taws xob input kom ze, siv cov kab lim los yog varistor ntawm cov kab hluav taws xob thiab thaiv cov hlau ntawm cov kab hluav taws xob input. Tsis txhob siv cov khoom siv ze uas tsim kom muaj zog sib nqus los yog lub suab nrov nrov.
4. Nruab ib lub hwj chim hloov los yog Circuit Court breaker nyob rau hauv ib qho yooj yim mus cuag qhov chaw rau muab los yog disconnecting lub hwj chim.
5. Tsis txhob siv lub tsev rau lwm lub hom phiaj (xws li voltmeter, ammeter), tab sis rau qhov ntsuas kub.
6. Thaum hloov lub input sensor, tua lub hwj chim ua ntej ua ntej hloov nws. Tom qab hloov lub input sensor, hloov tus nqi ntawm tus coj parameter.
7. 24VAC, 24-48VDC fais fab mov yuav tsum tau insulated thiab txwv voltage/tam sim no los yog Class 2, SELV fais fab mov ntaus ntawv.
8. Ua ib qho chaw yuav tsum tau nyob ib ncig ntawm lub tsev rau hluav taws xob hluav taws xob. Txhawm rau ntsuas qhov ntsuas kub kom raug, ua kom sov lub tsev li 20 feeb tom qab qhib lub hwj chim.
9. Xyuas kom tseeb tias lub hwj huam mov voltage nce mus txog qhov ntsuas voltage hauv 2 vib nas this tom qab muab lub zog.
10. Tsis txhob xaim rau cov terminals uas tsis siv.
11. Chav tsev no tuaj yeem siv rau hauv ib puag ncig hauv qab no.
    1. Sab hauv tsev (nyob rau hauv ib puag ncig kev ntsuas nyob rau hauv 'Specifications')
    2. Qhov siab tshaj plaws max 2,000m
    3. Pollution degree 2
    4. Installation qeb II

Cov khoom loj

• Photoelectric Sensors
• Fiber Optic Sensors
• Qhov rooj Sensors
• Qhov Rooj Sab Nraud Sensors
• Thaj chaw Sensors
• Sib Nqus Sensors
• Siab Sensors
• Rotary Encoder
• Connector/Sockets
• Hloov Hom Khoom Siv Hluav Taws Xob
• Tswj Hloov/Lamps/Buzzers
• I/O Terminal Blocks & Cables
• Stepper Motors/Tsav Tsheb/Motion Controllers
• Cov duab/Logic Panels
• Cov Khoom Siv Hauv Network
• Laser Marking System (Fiber, Co₂, Nd: YAG)
• Laser Vuam / Txiav System
• Temperature Controllers
• Kub / Humidity Transducers
• SSRs/Power Controllers Counters
• Timers
• Vaj Huam Sib Luag Meters
• Tachometer/Pulse (Rate) Meters
• Cov Chav Nyob
• Sensor Controllers
• http://www.autonics.com

HEADQUARTERS:

• 18, Bansong-ro 513beon-gil, Haeundae-gu, Busan,
• Kaus Lim Qab Teb, 48002
• TEL: 82-51-519-3232
• E-mail: sales@autonics.com

Instrukart Holdings Cov
Is Nrias teb Tus Xov Tooj Dawb: 1800-121-0506 | Ph: +91 (40)40262020 Mob +91 7331110506 | Email: yog info@instrukart.com #18, Street-1A, Czech Colony, Sanath Nagar, Hyderabad -500018, INDIA.

Cov ntaub ntawv / Cov ntaub ntawv

Autonics TCN4 SERIES Dual Indicator Temperature Controller [ua pdf] Phau ntawv qhia TCN4 SERIES Dual Indicator Temperature Controller, TCN4 SERIES, Dual Indicator Temperature Controller, Indicator Temperature Controller, Kub Controller, Controller

Cov ntaub ntawv

• Cov neeg siv phau ntawv