Cov ntsiab lus zais
1 MW PW M-90 series Constant Voltage PWM Output LED Driver
2 Nta
3 Daim ntawv thov
4 Kev piav qhia
5 SPECIFICATION
6 DIMMING kev ua haujlwm
6.1 3 hauv 1 dimming muaj nuj nqi (rau Blank-Type)
7 OUTUPUT LOAD vs TEMPERATURE
8 Thaiv tau Diagram
9 Mechanical Specification
10 Pom zoo rau Kev Taw Qhia
11 Phau ntawv qhia kev teeb tsa
12 Cov ntaub ntawv / Cov ntaub ntawv
12.1 Cov ntaub ntawv
13 Related Posts

MW-PW-LOGO

MW PW M-90 series Constant Voltage PWM Output LED Driver

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-PRODCUT

Nta

  • Ntev Voltage PWM style output
  • Daim ntawv thov teeb pom kev kub ntxhov yog muaj raws li IEC61347-2-13
  • Built-in nquag PFC muaj nuj nqi thiab chav kawm II tsim
  • Chav kawm 2 lub zog (tshwj tsis yog PWM-90-12)
  • Tsis muaj load zog noj <0.5W
  • Tag nrho encapsulated nrog IP67 qib
  • Muaj nuj nqi: 3 hauv 1 dimming (dim-rau-tawm); DAL/DALI-2
  • Yam tsawg kawg dimming theem 0.2% rau DALI hom
  • Hom lub neej> 50000 teev thiab 5 xyoo lav

Daim ntawv thov

  • LED sawb teeb pom kev zoo
  • Sab hauv LED teeb pom kev zoo
  • LED teeb pom kev zoo
  • LED architecture teeb pom kev zoo
  • Muaj teeb pom kev zoo

GTIN CODE

MW Nrhiav: htps:/www.meanwell.com/serviceGTIN.aspx

Kev piav qhia

PWM-90 series yog 90W LED AC / DC LED tsav tsheb featuring tas li voltage hom nrog PWM style tso zis, uas muaj peev xwm tswj tau qhov ci ci homogeneity thaum tsav tsheb txhua yam ntawm LED strips.PWM-90 ua haujlwm ntawm 90 ~ 305VAC thiab muaj cov qauv nrog cov ntsuas sib txawv.tage ntawm 12V thiab 48V. Ua tsaug rau kev ua haujlwm siab txog li 90.5%, nrog rau kev tsim tsis muaj kiv cua, tag nrho cov koob muaj peev xwm ua haujlwm rau -40C + 85C rooj plaub kub hauv qab huab cua dawb. Tag nrho cov koob yog ntsuas nrog IP67 ingress tiv thaiv qib thiab tsim nyog ua haujlwm rau qhuav, damp los yog qhov chaw ntub dej. PWM-90 yog txawm peem rau nrog ib tug dimming muaj nuj nqi uas txawv lub luag hauj lwm voj voog ntawm cov zis, muab zoo yooj yooj yim rau LED strips daim ntaub ntawv.

Qauv Nkauj Kauj

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-2

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-18

SPECIFICATION

Qauv PWM-90-12 PWM-90-24 PWM-90-36 PWM-90-48
 

 

 

OUTPUT

 DC VOLTAGE 12v XNUMX 24v XNUMX 36v XNUMX 48v XNUMX
RATED CURRENT 7.5 A 3.75 A 2.5 A 1.88 A
RATED POWER 90 W 90 W 90 W 90.24 W
UA PHEM RANGE 0 ~ 100%
PWM FREQUENCY (Typ.) 1.47kHz rau Blank/DA-Type, 2.5kHz rau DA2-Type
SETUP, RISE SIJHAWM Nco tseg. 2

Nco tseg. 9

 500ms, 80ms / 115VAC lossis 230VAC
TAM SIM NO (Typ.) 16ms/115VAC lossis 230VAC
 

 

 

 

 

 

 

NYIAJ

 VOLTAGE RANGE Nco tseg.3 90 ~ 305VAC 127 ~ 431VDC

(Thov xa mus rau ntu "TSHIAB CHARACTERISTIC")
FREQUENCY RANGE 47 ~ 63Hz
Hwj chim FACTOR (Hom.) PF> 0.98/115VAC, PF> 0.96/230VAC, PF> 0.92/277VAC @ thauj khoom tag nrho

(Thov xa mus rau "POWER FACTOR (PF) CHARACTERISTIC" ntu)
TAG NRHO HARMONIC DAB TSI THD < 20% (@load≧60% / 115VAC, 230VAC; @load≧75% / 277VAC)

(Thov saib mus rau "QHIA HARMONIC DISTORTION" ntu)
EFFICIENCY (Tib.) 88% 90.5% 90.5% 90.5%
AC CURRENT (Tib.) 0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC
INRUSH RUAJ NTSEG (Hom.) COLD pib 60A (twidth = 550 μs ntsuas ntawm 50% Ipeak) ntawm 230VAC; Rau NEMA 410
MAX. TSIS MUAJ. ntawm PSUs ntawm 16A CIRCUIT BREAKER 3 units (circuit breaker hom B) / 6 units (circuit breaker hom C) ntawm 230VAC
TXOJ CAI TSHIAB 0.25mA / 277VAC
    <0.5 W
 

 

Kev tiv thaiv

 HAUJ LWM 108 ~ 130% tso zis zog
Hiccup hom, rov zoo li qub tom qab raug tshem tawm
NYIAM QAIB Kaw o/p voltage, rov ua lub zog rov qab los (tshwj tsis yog DA2-hom)

Hiccup hom, rov zoo li qub tom qab raug tshem tawm (tsuas yog rau DA2-hom)
 

VOL VOLTAGE

 15 ~ 17V 28 ~ 34V 41 ~ 46V 54 ~ 60V
Kaw o/p voltage, rov qhib lub zog kom rov zoo
Tshaj kub Kaw o/p voltage, rov qhib lub zog kom rov zoo
 

 

 

Ib puag ncig

 Ua hauj lwm TEMP. Tcase = -40 ~ + 85 ℃ (Thov xa mus rau " LOAD LOAD vs TEMPERATURE" seem)
MAX. CAS YUAV TSUM Txc =+85 ℃
Ua hauj lwm HUMIDITY 20 ~ 95% RH tsis ua-hws
KHOOM TEMP., HUMIDITY -40 ~ +80 ℃, 10 ~ 95% RH
TEMP. LEEG THOJ ± 0.03%/℃ (0 ~ 50 ℃)
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, lub sij hawm rau 72min. txhua tus nrog X, Y, Z axes
 

 

 

SAFETY & EMC

  

SAFETY Standard Nco tseg. 5

 UL8750 (tshwj tsis yog DA-Type), CSA C22.2 No. 250.13-12; ENEC BS EN / EN61347-1, BS EN / EN61347-2-13 ywj siab, BS EN / EN62384, IP67, BIS IS15885 (rau 12,24,48 Blank Hom nkaus xwb), EAC TP TC 004, GB19510.1. 19510.14 pom zoo;

Kev tsim qauv xa mus rau BS EN / EN60335-1; Raws li BS EN / EN61347-2-13 appendix J haum rau kev teeb tsa thaum muaj xwm ceev
DALI STANDARDS IEC 62386-101, 102, 207,251 rau DA / DA2-hom nkaus xwb, Ntaus hom 6 (DT6)
Nrog VOLTAGE I/PO/P: 3.75KVAC; I / P-DA: 1.5KVAC; O / P-DA: 1.5KVAC
ISOLATION RESISTANCE I / PO / P: 100M Ohms / 500VDC / 25 ℃ / 70% RH
EMC Kev Ntseeg Nco tseg. 6 Ua raws li BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load ≧ 60%); BS EN/EN61000-3-3, GB17743 thiab GB17625.1, EAC TP TC 020
EMC THAWJ COJ Ua raws li BS EN / EN61000-4-2,3,4,5,6,8,11; BS EN / EN61547, theem kev lag luam lub teeb (surge tiv thaiv kab-kab 2KV), EAC TP TC 020
 

Lwm tus

 MTBF 2394.5 332k h. Telcordia SR-224.2 (Bellcore); 217K teev min. MIL-HDBK-25F (XNUMX ℃)
DIMENSION 171 * 63 * 37.5mm (L * W * H)
Ntim 0.77 kg; 18pcs / 14.9Kg / 0.97CUFT
Nco tseg
  1. Txhua qhov tsis hais tshwj xeeb yog ntsuas ntawm 230VAC input, ntsuas tam sim no thiab 25C ntawm qhov ntsuas kub.
  2. De-rating tej zaum yuav xav tau nyob rau hauv qis input voltages. Thov xa mus rau seem "TSHIAB CHARACTERISTIC" kom paub meej.
  3. Qhov ntev ntawm lub sijhawm teeb tsa yog ntsuas thaum pib txias. Tig ON/OFF tus neeg tsav tsheb yuav ua rau kom lub sijhawm teem sijhawm.
  4. Tus neeg tsav tsheb raug suav tias yog ib qho khoom siv uas yuav ua haujlwm nrog cov khoom siv zaum kawg. Txij li thaum EMC kev ua tau zoo yuav raug cuam tshuam
    los ntawm kev ua tiav kev teeb tsa, cov cuab yeej siv zaum kawg yuav tsum rov tsim nyog EMC Cov Lus Qhia ntawm kev teeb tsa tiav dua.
  5. Cov koob no ua tau raws li lub neej expectancy ntawm> 50,000 teev ntawm kev ua haujlwm thaum Tcase, tshwj xeeb yog c) taw tes (lossis TMP, ib DLC), yog li 75C lossis tsawg dua.
  6. Thov xa mus rau daim ntawv lees paub ntawm MEAN WELLs website ntawm http://www.meanwell.com
  7. Lub ambient kub derating ntawm 3.5 C / 1000m nrog kiv cua qauv thiab ntawm 5 CH000m nrog kiv cua qauv rau kev khiav hauj lwm qhov siab siab tshaj 2000m (65O0f).
  8. Rau txhua daim ntawv thov thiab IP dej pov thawj kev ua haujlwm ceev faj, thov xa peb cov neeg siv phau ntawv ua ntej siv.
    https://www.meanwell.com/Upload/PDF/LED_EN.pdf
  9. Raws li IEC 62386-101/102 DALI lub zog ntawm lub sijhawm thiab kev cuam tshuam cov cai, lub sijhawm teeb tsa yuav tsum tau sim nrog DALI maub los uas
    tuaj yeem txhawb nqa DALI lub zog ntawm kev ua haujlwm, txwv tsis pub lub sijhawm teeb tsa yuav siab dua 0.5 thib ob rau DA hom.

DIMMING kev ua haujlwm

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-3

  • DIM + rau Blank-Type
    • DA + rau DA / DA2-hom
  • DIM- rau hom Blank
    • DA- rau DA / DA2-hom

CEEB TOOM: DA / DA2-Hom tsis muaj qhov sib txawv ntawm "+" thiab "-" ncej

Dimming txoj cai rau PWM style tso zis

  • Dimming yog ua tiav los ntawm kev hloov pauv lub luag haujlwm ntawm cov zis tam sim no.

Tso zis DC tam sim no

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-4

  • Lub voj voog ua haujlwm (%) = TON / T × 100%
  • Output PWM zaus: 1.47kHz rau Blank/DA-Type 2.5kHz rau DA2-Type
3 hauv 1 dimming muaj nuj nqi (rau Blank-Type)
  • Siv ib qho ntawm peb txoj hauv kev ntawm DIM + thiab DIM-: 0 ~ 10VDC, lossis 10V PWM teeb liab lossis tsis kam.
  • Dimming qhov tam sim no los ntawm lub hwj chim mov: 100μA (typ.)

Siv cov khoom siv ntxiv 0 ~ 10VDC

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-5

Siv cov khoom siv ntxiv 10V PWM teeb liab (ntau zaus 100Hz ~ 3KHz)

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-6

Siv additive kuj

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-7

Nco tseg

  1. Min. Lub voj voog ua haujlwm ntawm cov zis tam sim no yog kwv yees li 0.15%, thiab cov tswv yim dimming yog li 6KΩ lossis 0.6VDC, lossis 10V PWM teeb liab nrog 6% lub voj voog ua haujlwm.
  2. Lub voj voog ua haujlwm ntawm cov zis tam sim no tuaj yeem poob mus rau 0% thaum dimming input tsawg dua 6KΩ lossis tsawg dua 0.6VDC, lossis 10V PWM teeb liab nrog lub voj voog ua haujlwm tsawg dua 6%.

DALI Interface (thawj sab; rau DA / DA2-Hom)

  • Siv DALI teeb liab ntawm DA + thiab DA-.
  • DALI raws tu qauv muaj 16 pawg thiab 64 chaw nyob.
  • Thawj kauj ruam yog kho ntawm 0.2% ntawm cov zis

OUTUPUT LOAD vs TEMPERATURE

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-8

STATIC CHARACTERISTIC/Power FACTOR (PF) CHARACTERISTIC

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-9

  • De-rating yog xav tau nyob rau hauv qis input voltage.

ZOO TSHAJ PLAWS HARMONIC DISTORTION (THD)

  • Qauv 48V, Tcase ntawm 75 ℃

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-10

EFFICIENCY vs LOAD

PWM-90 series muaj kev ua haujlwm zoo tshaj plaws uas tuaj yeem ncav cuag 90.5% hauv daim ntawv thov.

  • Qauv 48V, Tcase ntawm 75 ℃

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-11

LUB SIJ HAWM

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-12

Thaiv tau Diagram

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-13

Mechanical Specification

Hom Blank

  • Case No: PWM-90P
  • Chav tsev: mm

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-14

DA/DA2-Type

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-15

Pom zoo rau Kev Taw Qhia

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-16

Phau ntawv qhia kev teeb tsa

Kev sib txuas rau Blank-type

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-17

Ceeb toom

  • Ua ntej pib qhov kev teeb tsa lossis kev saib xyuas, thov txiav lub hwj chim f ‧ rom lub tshuab hluav taws xob. Xyuas kom meej tias nws tsis tuaj yeem rov txuas tsis tau!
  • Khaws qhov cua kom zoo nyob ib ncig ntawm lub tsev thiab tsis txhob muab cov khoom tso rau ntawm nws. Tsis tas li ntawd yuav tsum tau khaws cia qhov deb ntawm 10-15 cm thaum lub cuab yeej uas nyob ib sab yog qhov cua sov.
  • Mounting orientations uas tsis yog tus qauv kev taw qhia lossis ua haujlwm nyob rau hauv qhov kub thiab txias tuaj yeem ua rau qhov kub thiab txias ntawm cov khoom siv sab hauv thiab yuav xav tau qhov ntsuas qhov ntsuas ntawm cov zis tam sim no.
  • Kev ntsuas tam sim no ntawm qhov pom zoo thawj / theem nrab cable yuav tsum ntau dua lossis sib npaug ntawm chav tsev. Thov xa mus rau nws cov specification.
  • Rau cov tsav tsheb LED nrog cov khoom siv dej tsis sib haum, xyuas kom meej tias qhov kev sib txuas ntawm chav tsev thiab lub teeb pom kev zoo yog nruj kom cov dej tsis tuaj yeem nkag mus rau hauv lub cev.
  • Rau cov tsav tsheb dimmable LED, xyuas kom tseeb tias koj lub tshuab dimming muaj peev xwm tsav cov units.PWM series xav tau 0.15mA txhua chav.
  • Tc max. raug txheeb xyuas ntawm cov khoom lag luam. Thov nco ntsoov tias qhov kub ntawm Tc point yuav tsis pub dhau qhov txwv.
  • Tsis txhob txuas "DIM- rau Vo-".
  • Haum rau kev siv sab hauv tsev lossis siv sab nraum zoov yam tsis muaj hnub ci ncaj qha. Thov tsis txhob muab tso rau hauv dej li 30 feeb.
  • Cov khoom siv hluav taws xob yog suav tias yog ib qho khoom siv uas yuav ua haujlwm nrog cov khoom siv zaum kawg. Txij li thaum EMC kev ua tau zoo yuav raug cuam tshuam los ntawm kev teeb tsa tiav, cov khoom siv zaum kawg yuav tsum rov tsim nyog EMC Cov Lus Qhia ntawm kev teeb tsa tiav dua.

Tus neeg siv phau ntawv

MW-PW-M -90-series-Constant-Voltage-PWM-Output-LED-Driver-FIG-1

Cov ntaub ntawv / Cov ntaub ntawv

MW PW M-90 series Constant Voltage PWM Output LED Driver [ua pdf] Tus tswv phau ntawv
PW M -90 series Constant Voltage PWM Output LED Driver, PW M-90 series, Constant Voltage PWM Output LED Driver, Output LED Driver

Cov ntaub ntawv

Related Posts

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *